Bike Forums
0 2023/08/09 15:30:35
...with paint that is beautiful in most places...
...with paint that is beautiful in most places...
0 2023/08/09 15:30:37
While I've never taken a "bearing ball" census, I believe there are between 60-70--- and not "hundreds." And I have yet to find a single fairy wing on any bearing.
While I've never taken a "bearing ball" census, I believe there are between 60-70--- and not "hundreds." And I have yet to find a single fairy wing on any bearing.
0 2023/08/12 12:16:01
My '71 Paramount P13 with goathide covers.
My '71 Paramount P13 with goathide covers.
0 2023/08/23 05:02:04
0 2023/09/01 04:56:37
0 2023/09/06 16:49:29
Top view of a Perfect 17T next to a New Winner body.
Top view of a Perfect 17T next to a New Winner body.
0 2023/09/15 08:05:48
Bottom view of 17T
Bottom view of 17T
0 2023/09/15 08:07:11
17T Perfect sprocket threaded to a New Winner body.
17T Perfect sprocket threaded to a New Winner body.
0 2023/09/15 08:07:50
'75 Schwinn Voyageur II with the DIY "Gatorcet" saddle and other 'gator leather bits, and indexed three speed IGH shifting
'75 Schwinn Voyageur II with the DIY "Gatorcet" saddle and other 'gator leather bits, and indexed three speed IGH shifting
0 2023/09/26 02:42:37
Vehicle Garage to the left of the door. Bike Palace to the right of the door.
Vehicle Garage to the left of the door. Bike Palace to the right of the door.
0 2023/10/01 05:49:15
0 2023/10/01 06:01:10
0 2023/10/03 04:32:03
0 2023/10/03 04:37:51
0 2023/10/26 04:37:17
0 2023/10/26 04:38:38
Seat tube: 52cm C-C. Top tube: 54cm C-C.
Seat tube: 52cm C-C. Top tube: 54cm C-C.
0 2023/11/13 17:24:37
SN 2E00990
SN 2E00990
0 2023/11/13 18:13:16
0 2023/11/22 11:14:34
Maybe Mark Cavendish could use it in next year's TdF.
Maybe Mark Cavendish could use it in next year's TdF.
0 2023/11/26 13:22:34
0 2023/11/29 10:45:44
0 2023/12/02 09:44:59
The 'Gatorcet (Avocet Racer recovered in alligator embossed cowhide). Available for any poor soul to test ride at his or her own discomfort! Please note: The stitching disappears under the booty. Other factors caused my pain and suffering!
The 'Gatorcet (Avocet Racer recovered in alligator embossed cowhide). Available for any poor soul to test ride at his or her own discomfort! Please note: The stitching disappears under the booty. Other factors caused my pain and suffering!
0 2023/12/06 04:36:54
0 2023/12/06 07:36:51
0 2023/12/08 03:48:43
0 2023/12/13 04:43:17
Sprockets removed from body prior to cleaning.
Sprockets removed from body prior to cleaning.
0 2023/12/14 05:02:50
Sprockets after cleaning with Dawn and Scotch Green scrub pad.
Sprockets after cleaning with Dawn and Scotch Green scrub pad.
0 2023/12/14 05:04:29
Sprockets after polishing in walnut and polish.
Sprockets after polishing in walnut and polish.
0 2023/12/14 05:06:23
Reassembled, serviced, and polished Oro.
Reassembled, serviced, and polished Oro.
0 2023/12/14 05:07:35
0 2023/12/14 18:27:38
0 2023/12/15 18:58:23
'83 Lotus Super Sport Aero equipped with Dura Ace AX
'83 Lotus Super Sport Aero equipped with Dura Ace AX
0 2023/12/16 13:33:01
0 2023/12/21 05:26:36
I can also swap the 30T for a 28T.
I can also swap the 30T for a 28T.
0 2023/12/31 14:54:21
0 2024/01/16 17:56:32
In this instance, I made the handlebar bag to mount to the bottom of the handlebar bottle cages. It contains my spare tubular tire and Vittoria Pit-Stop inflators and leak preventor.
In this instance, I made the handlebar bag to mount to the bottom of the handlebar bottle cages. It contains my spare tubular tire and Vittoria Pit-Stop inflators and leak preventor.
0 2024/01/04 05:42:24
1. Tool and Regina Extra 7-Speed. My focus will be on the left hand side of the tool.
1. Tool and Regina Extra 7-Speed. My focus will be on the left hand side of the tool.
0 2024/01/18 13:29:12
2. Begin by removing the sprockets. In this case the first three smallest are threaded together and then threaded onto the 4th sprocket, which is the first to thread to the Regina body.
2. Begin by removing the sprockets. In this case the first three smallest are threaded together and then threaded onto the 4th sprocket, which is the first to thread to the Regina body.
0 2024/01/18 13:30:25
3. Now I've removed the 4th Sprocket revealing the first shelf of the threaded portion of the Regina body. This is the portion which threads into the tool and will engage the stop.
3. Now I've removed the 4th Sprocket revealing the first shelf of the threaded portion of the Regina body. This is the portion which threads into the tool and will engage the stop.
0 2024/01/18 13:33:20
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.