Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Why bike theft is so hard to stop

Search
Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Why bike theft is so hard to stop

Thread Tools
 
Search this Thread
 
Old 09-16-12, 06:51 PM
  #51  
Certified Bike Brat
 
Burton's Avatar
 
Join Date: Jan 2011
Location: Montreal, Quebec
Posts: 4,251
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 6 Times in 6 Posts
Originally Posted by Ranko Kohime
I saw a new cable lock at the bike shop, I forget what the brand was, but it was fairly lightweight for it's size, (not much heavier than the standard number locks I have on my bikes), but the cable was so thick, it wouldn't fit in the biggest bolt cutter in my toolbox, which is the biggest I could get at Sears.

Now, it would certainly break quite easily IF it could be gotten into the bolt cutter, but there was no way to get it in there. Nibbling would be time consuming, if it was even possible.
Actually the tool of choice today is a cordless angle grinder, and unfortunately there isn't anything on the market that'll stop them.
Burton is offline  
Old 09-16-12, 07:11 PM
  #52  
Senior Member
 
Join Date: Jul 2012
Posts: 191
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Ranko Kohime
I saw a new cable lock at the bike shop, I forget what the brand was, but it was fairly lightweight for it's size, (not much heavier than the standard number locks I have on my bikes), but the cable was so thick, it wouldn't fit in the biggest bolt cutter in my toolbox, which is the biggest I could get at Sears.

Now, it would certainly break quite easily IF it could be gotten into the bolt cutter, but there was no way to get it in there. Nibbling would be time consuming, if it was even possible.
All it takes is a set of vise grips in addition to the bolt cutters, if the cable can be compressed (of course I don't know the cable lock you mean so there's always that). Lock them a little under the diameter of the cable, to compress it into an oblong shape. Cut once from two directions, and with a small bit of practice this can cut the cable in less than thirty seconds. Again, depending on the cable.
Blinkie is offline  
Old 09-16-12, 09:42 PM
  #53  
commu*ist spy
 
spectastic's Avatar
 
Join Date: Aug 2012
Location: oregon
Posts: 4,459
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 5 Times in 5 Posts
I'm not from a big city, but here's what I would do if I were in a big city:

use a u-lock on the frame and front wheel
get an extra lock for the back wheel
replace the quick release on the saddle
don't leave the bike outside overnight
keep the bike indoors overnight
when in doubt, ride the beater

I mean if I'm just commuting during the day, I'll probably just carry a regular combination lock and nothing else. But I'm pretty sure night time is when you have to be worried. If you got these bases covered, there shouldn't be a problem. Now if only the general population can get this information from their LBS, it would be wonderful.

The best way to address the theft problem is to practice good common sense. The serial number is one way of getting your bike back. But when it comes to cops, those overfed fatties probably couldn't care less.

Last edited by spectastic; 09-16-12 at 09:47 PM.
spectastic is offline  
Old 09-17-12, 07:54 AM
  #54  
Banned.
 
Join Date: Jul 2010
Posts: 2,325
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by mechBgon
As soon as men decide that all means are permitted to fight an evil, then their good becomes indistinguishable from the evil that they set out to destroy.
--Christopher Dawson
Interesting quote, but not really relevant to my post...
myrridin is offline  
Old 09-24-12, 06:18 AM
  #55  
Senior Member
 
Join Date: Sep 2010
Posts: 60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by northernlights
depends on the value of the guitar. did they steal a cheap $100 guitar from you?

what if you had a $500 guitar stolen from you or a $2000 guitar? you think the thief should be let off with a just a warning or a slap on the wrist? you think that will teach him not to do it again? that kind weak do nothing mentality only encourages them to do it again and they most certainly WILL.

when a thief is caught for the first time, it is likely he has stolen many times before but has been getting away with it until now. so one to three years in prison, or more for multiple offenses, would not be unreasonable. regardless there must be real consequences for criminal behavior because if not they will keep doing it. if you don't want to do the time, don't do the crime!
Where did I say slap on the wrist? Anything less than death is a slap on the wrist?!? Theft of a $100 dollar guitar(Bike), $500 Guitar (bike), $10,000 guitar (bike), all deserves punishment: jail time, fines, restitution, stockade... but I still don't think it justifies a death sentence.
(Which of course, is what I was talking about)
mrtidy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fritz1255
Advocacy & Safety
6
07-19-18 01:25 AM
onfloat
General Cycling Discussion
0
12-14-14 06:54 PM
ctpres
Road Cycling
7
09-27-12 03:56 PM
Burton
General Cycling Discussion
16
06-25-11 01:46 PM
Lilcphoto
Advocacy & Safety
4
09-18-10 03:51 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.