Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

time iclic

Search
Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

time iclic

Thread Tools
 
Search this Thread
 
Old 03-08-10 | 10:13 AM
  #1  
Thread Starter
Senior Member
 
Joined: Dec 2007
Posts: 412
Likes: 0

Bikes: raleigh sport (thank god i got rid of it), current: cannondale systemsix w/ultegra 10, 2009 cannondale scalpel

time iclic

i did a search and i didn't see too many posts on the iclic...has anybody recieved them and ridden them yet? they look very interesting and sound pretty promising.
grafsk8er is offline  
Reply
Old 03-08-10 | 08:41 PM
  #2  
Cogsby11's Avatar
Toffiest Multipiston
 
Joined: Jun 2005
Posts: 25
Likes: 0
Mine were just delivered. ICLIC Carbons.

They are almost the same size as my RXS pedals, and they are actually slimmer than they look from pictures. Compared with the RXS, the front tip of the iclic is much beefier and stronger looking (the old design was too fragile), but they were as light as advertised at 234g. The cleats seem harder than the old versions though, especially the pontoons. I do not know if they will be as easy to walk indoors in. As long as they still last as long, that's fine.

The entry system is incredible - It is better than I though it would be. You put your cleat on top of the pedal, there is a distinctly audible snap, and that is it - it's locked in. Almost no pressure is required. Exiting feels exactly the same as with RXS, except the mechanism remains open (to be honest, this is less impressive than it sounds. The difference between "open" and "closed" is only about 2mm).

So far, I am extremely happy.
Cogsby11 is offline  
Reply
Old 03-08-10 | 11:00 PM
  #3  
Thread Starter
Senior Member
 
Joined: Dec 2007
Posts: 412
Likes: 0

Bikes: raleigh sport (thank god i got rid of it), current: cannondale systemsix w/ultegra 10, 2009 cannondale scalpel

ah very nice. ive been looking around for pedals. as nice as speedplay zeros are, the upkeep and maintenance just isn't for me. they are definitely a proven pedal system, but i think its time for something new.
grafsk8er is offline  
Reply
Old 05-02-10 | 02:41 PM
  #4  
stevesurf's Avatar
another cat...FAB!
 
Joined: Jun 2005
Posts: 1,381
Likes: 0
From: 1st star to the right...

Bikes: Merlin Ti Build, Trek Y-50, Bianchi Titanium Build, Custom Cuevas Road bike

^
Are the iClic cleats compatible with Time RXS pedals?
__________________
9

Last edited by stevesurf; 05-02-10 at 02:50 PM.
stevesurf is offline  
Reply
Old 05-02-10 | 04:54 PM
  #5  
tony2v's Avatar
Senior Member
15 Anniversary
 
Joined: Dec 2008
Posts: 590
Likes: 32
From: National City, CA

Bikes: 1975 Albert Eisentraut, 1992 Bill Davidson, 2006 Moots Compact, 2007 KHS Solo-One, 2010 Van Dessel Drag Strip Courage, 2013 Alchemy Xanthus, 2016 Breadwinner Lolo, 2018 Moots VaMoots RSL, 2019 Chapter2 Tere Disc, 2020 Chapter2 Ao Limited Edition

Originally Posted by stevesurf
^
Are the iClic cleats compatible with Time RXS pedals?
No!
Talked to a friend yesterday about the entry mechanism, he said don't put your finger there unless you want to lose a finger nail! He said it feels the same as the RXS, but the entry is so easy. I'm itching to upgrade from the RXS, but I'll need two pairs, one for the road bike and another for the track bike.
tony2v is offline  
Reply
Old 05-02-10 | 08:17 PM
  #6  
Senior Member
 
Joined: Dec 2005
Posts: 7,848
Likes: 4
Wonder if cheaper to get another pair of shoes, well all depends of the shoes you use anyways.
ultraman6970 is offline  
Reply
Old 05-02-10 | 08:30 PM
  #7  
rjones28's Avatar
Mostly Harmless
Titanium Club Membership
15 Anniversary
Community Builder
Community Influencer
 
Joined: Jul 2008
Posts: 58,817
Likes: 6,191
From: Adrift

Bikes: Have two wheels

I just got a set of iClics. Took them on their maiden voyage this morning and they work really well. Entry is very easy, no real pressure needed to engage the pedal. No looking down required. Release tension was nice and easy.
rjones28 is offline  
Reply
Old 05-03-10 | 03:01 AM
  #8  
Senior Member
 
Joined: May 2007
Posts: 72
Likes: 0

Bikes: Condor Italia + Marin Muirwoods (which got me back into riding)

I bought racer and carbon's for my bikes and love them. Great mechanism and they feel very sold once you're in. Definite improvement on the RXS I had and the Keo's I was using before them.

My only complaint is that the cleats don't seem to be holding up well (worse than the RXS). After walking in them a little the red surface plastic is breaking up and coming away from the main cleat body.
Orbital57 is offline  
Reply
Old 05-03-10 | 04:20 AM
  #9  
Senior Member
 
Joined: Aug 2006
Posts: 935
Likes: 0
From: Perth, W.A.
Google for reviews, a few people have reported broken cleat pontoons (from walking mainly, not a riding issue). If it's true, that's a shame, because Time pedals work great in general and I would like to update my RXSs.

Orbital57, how easy do you find they are to clip into?
scirocco is offline  
Reply
Old 05-04-10 | 08:11 PM
  #10  
stevesurf's Avatar
another cat...FAB!
 
Joined: Jun 2005
Posts: 1,381
Likes: 0
From: 1st star to the right...

Bikes: Merlin Ti Build, Trek Y-50, Bianchi Titanium Build, Custom Cuevas Road bike

Originally Posted by Orbital57
I bought racer and carbon's for my bikes and love them. Great mechanism and they feel very sold once you're in. Definite improvement on the RXS I had and the Keo's I was using before them.

My only complaint is that the cleats don't seem to be holding up well (worse than the RXS). After walking in them a little the red surface plastic is breaking up and coming away from the main cleat body.
That's going to be a real disappointment as I hoped they were even going to be better than cafe cleats
Originally Posted by scirocco
Google for reviews, a few people have reported broken cleat pontoons (from walking mainly, not a riding issue). If it's true, that's a shame, because Time pedals work great in general and I would like to update my RXSs.

Orbital57, how easy do you find they are to clip into?
Here's some:

https://forums.roadbikereview.com/sho...d.php?t=201213

https://weightweenies.starbike.com/fo...9431&start=105

https://www.bikeradar.com/forum/viewtopic.php?p=16022662
I've been using the I-clics for a week. I used to use Shimano A520s and MTB shoes.

Very easy to click in and out. They really snap shut on the shoe. Getting out is as simple as my old SPDs. No problem. They are far lighter than my old pedals, especially when you add in the difference with the new shoes - SIDI Ergo 2.

However...

The cleats have a lot of wear in just a week. I'll have to wait and see how long they last, but my last shoes were easy to walk in and there was little cleat wear in a couple of years. These will never last that long.

There is a lot of float on the pedals. I had float in the old pedals which meant I could move my toes left and right as they swivel. On the I-clic you can move your whole foot. Sometimes it feels like my foot is falling down the right side of the pedal. This actually make the platform feel smaller and less stable than my old SPDs.

They also seem quite noisy. When fully clipped in they still make occaissional clicking noises, My foot stays firmly in, so I don't know what the noises are.

I'm still not used to the carbon sole/new pedal mechanism and sometimes I miss and my foot slips on the pedal leading to a few close shaves between chin and handlebar,

Overall I'm yet to be convinced either way. I'll play with the setting and see if I can tune them to my needs a little more at the weekend.
__________________
9
stevesurf is offline  
Reply
Old 05-07-10 | 01:52 PM
  #11  
stevesurf's Avatar
another cat...FAB!
 
Joined: Jun 2005
Posts: 1,381
Likes: 0
From: 1st star to the right...

Bikes: Merlin Ti Build, Trek Y-50, Bianchi Titanium Build, Custom Cuevas Road bike

^
FYI the Titan Carbons are $261 here; just ordered a set; we'll see if they're reputable:

https://www.xxcycle.com/php/boutique/...0&FROM=froogle
__________________
9
stevesurf is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WorldIRC
Road Cycling
6
07-28-12 06:11 AM
mihlbach
Road Cycling
12
03-20-10 01:13 PM
kr32
Fifty Plus (50+)
5
03-03-10 08:33 PM
darrencope
Road Cycling
14
02-06-10 08:39 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.