Platforms for spd pedals
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Boston, MA
Posts: 505
Bikes: Litespeed M1, Jamis Sputnik
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Platforms for spd pedals
So, I've got Shimano 540 spd pedals on my commuter. Thinking it might be nice to get some platforms to attach to allow me to wear boots in winter. Do you have anything to recommend? Alternative is to just swap out for platform pedals, but I'd rather not, as I'd like to use spd shoes except in really bad weather.
#2
Senior Member
I have a pair of Shimano platforms on one bike and A530--SPD/platform pedals on another. The adapters have worked without problems, they could be the cheap way if you already have SPD pedals. The A530s are quite slick on the platform side in wet weather, the platform adapters are better in foul weather. I haven't had the platforms very long and have only used them on one short wet trip so I don't have a lot of time on them.
Problem Solvers makes aluminum platforms for SPDs. They look like they would grip better wet than the A530 although any gloss finished pedal will probably be slippery.
Problem Solvers makes aluminum platforms for SPDs. They look like they would grip better wet than the A530 although any gloss finished pedal will probably be slippery.
#4
Senior Member
Join Date: May 2003
Location: Hampton Roads VA
Posts: 1,787
Bikes: '07 Trek 520, '09 Gary Fisher Triton, '04 Trek 8000, '85 Trek 500, '84 Trek 610, '85 Trek 510, '88 Trek 660, '92 Trek 930, Trek Multitrack 700
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Check your LBS, mine have some plastic platforms that are used for test rides on SPD equiped bikes. They may have a spare set they are willing to part with.
#6
Banned
of the Idea of Decksters, a plate of aluminum diamond deck plate. with bolt holes for cleat bolts
Spare cleat + the equivalent of pontoons, underneath, to stabilize the plate.
like pocket edges of the Spud shoes..
to make it better than the one QBP sells, make it bigger, and drill and tap it for a bunch of little setscrews
.. to serve as traction grip-pins to keep your rubber boot-soles from slipping.
the plastic ones may not be best in the shoe grip criteria .. but are readymade. & cheap.
Spare cleat + the equivalent of pontoons, underneath, to stabilize the plate.
like pocket edges of the Spud shoes..
to make it better than the one QBP sells, make it bigger, and drill and tap it for a bunch of little setscrews
.. to serve as traction grip-pins to keep your rubber boot-soles from slipping.
the plastic ones may not be best in the shoe grip criteria .. but are readymade. & cheap.
Last edited by fietsbob; 11-06-13 at 11:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rgr555
Cyclocross and Gravelbiking (Recreational)
24
10-18-17 07:37 PM