For the love of English 3 speeds...
Senior Member
Join Date: Dec 2012
Location: St. Paul, MN
Posts: 1,597
Bikes: Too many 3-speeds, Jones Plus LWB
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 265 Times
in
119 Posts
No photos.
Unless the SW gets some sort of mod that we currently don't know about, you can count on it to slip regardless of how hot or cold it is outside. I have an SW on my 1957 BSA rod brake machine. I appreciate the wider range of gears; when in 3rd and it pops, I have to back pedal or switch to 2nd briefly to prevent it from slipping. It will do this even if not under a lot of torque. 2nd and 1st are pretty good, but its slipped in those gears too.
I suspect that if someone spent some time sorting this out, they would find that a slightly different shape of pawl combined with better materials would sort it out. That is the only reason I've retained it, other than I don't feel like rebuilding the rear wheel on that bike right now.
Unless the SW gets some sort of mod that we currently don't know about, you can count on it to slip regardless of how hot or cold it is outside. I have an SW on my 1957 BSA rod brake machine. I appreciate the wider range of gears; when in 3rd and it pops, I have to back pedal or switch to 2nd briefly to prevent it from slipping. It will do this even if not under a lot of torque. 2nd and 1st are pretty good, but its slipped in those gears too.
I suspect that if someone spent some time sorting this out, they would find that a slightly different shape of pawl combined with better materials would sort it out. That is the only reason I've retained it, other than I don't feel like rebuilding the rear wheel on that bike right now.
Senior Member
Join Date: Oct 2016
Location: Sacramento, CA
Posts: 458
Bikes: 2017 Surly Cross-Check. 2020 Specialized Turbo Vado 3.0, 2002 GT Dyno Roadster, 2002 Rans Stratus, 2020 Giant Fathom 2, 2011 Trek Pure Sport
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 171 Post(s)
Liked 85 Times
in
62 Posts
Coaster to 3 speed conversion
I found this early 70's Raleigh LTD SC (coaster), and my wife dug it. I bought a donor 69 or 70 AMF Hercules and swapped rear wheels and took the brakes/levers. Sold the AMF as a coaster. I still needed a thru-bolt for the rear brake (AMF had a flat bar mount instead of a tube), so I bought another shabby old Sports just for it's bolt.
The original saddle on the LTD is a Brooks vinyl mattress style. It was split and cracked. My father in law is redoing it in leather. He's just taking his time, so I put my wife's MTB saddle on it for the meantime.
It will get it's first ride tonight or tomorrow morning
The original saddle on the LTD is a Brooks vinyl mattress style. It was split and cracked. My father in law is redoing it in leather. He's just taking his time, so I put my wife's MTB saddle on it for the meantime.
It will get it's first ride tonight or tomorrow morning
Senior Member
Join Date: Jan 2007
Location: Ontario
Posts: 2,648
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 478 Post(s)
Liked 634 Times
in
336 Posts
I am sure she will love it- my wife loves her drop bar bike but when we go out together on old 3 speeds we get all the nice smiles and gestures from folks which we both love. And that basket is perfect for some cold wine and fresh bread and cheese!
Nice job - I really like the look of that build.
Nice job - I really like the look of that build.
Junior Member
Join Date: Oct 2017
Posts: 13
Bikes: Fuji CX, 1958 Triumph
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi everyone, I'd like to show you a 1958 Triumph I got recently. I got it off a farmer friend who had it stashed in a shed on his property - he couldn't remember when he acquired it.
Here it is after a clean up:
I have fitted new grips, a new reflector and a new shift cable here. I put on a new back tire as well. It's fitted with a 3 speed AG hub, dated 8/58. All the gears work, and there's the remnants of a card attached to the light which tells you what bulbs it uses. The lights still work.
Not a lot of wear on the cog:
Anybody know how long it takes the rubber grips to go like this?
Inside the rear mudguard is very clean and well preserved. Note the Triumph script on the cog:
I had to put a modern style shifter cable on because when I changed the rear tyre, I had to undo the original cable end. It untwisted the cable and it was weakened a lot. In hindsight (which is always 20/20,) I should have put a couple of drops of oil down the cable end so it let go of the cable and didn't untwist it. I will know for next time.
A little bit of rust:
It's missing a couple of bits - a pedal end cap, and an original style reflector, but it's incredibly complete and original for it's age. I have ridden it a few times but I suspect you'd end up with thighs like tugboats if you rode it every day. Plans are to find the missing parts and clock up a few miles on it.
Here it is after a clean up:
I have fitted new grips, a new reflector and a new shift cable here. I put on a new back tire as well. It's fitted with a 3 speed AG hub, dated 8/58. All the gears work, and there's the remnants of a card attached to the light which tells you what bulbs it uses. The lights still work.
Not a lot of wear on the cog:
Anybody know how long it takes the rubber grips to go like this?
Inside the rear mudguard is very clean and well preserved. Note the Triumph script on the cog:
I had to put a modern style shifter cable on because when I changed the rear tyre, I had to undo the original cable end. It untwisted the cable and it was weakened a lot. In hindsight (which is always 20/20,) I should have put a couple of drops of oil down the cable end so it let go of the cable and didn't untwist it. I will know for next time.
A little bit of rust:
It's missing a couple of bits - a pedal end cap, and an original style reflector, but it's incredibly complete and original for it's age. I have ridden it a few times but I suspect you'd end up with thighs like tugboats if you rode it every day. Plans are to find the missing parts and clock up a few miles on it.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
I am sure she will love it- my wife loves her drop bar bike but when we go out together on old 3 speeds we get all the nice smiles and gestures from folks which we both love. And that basket is perfect for some cold wine and fresh bread and cheese!
Nice job - I really like the look of that build.
Nice job - I really like the look of that build.
Senior Member
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,544
Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1972 Raleigh Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 351 Post(s)
Liked 599 Times
in
229 Posts
Hi everyone, I'd like to show you a 1958 Triumph I got recently. I got it off a farmer friend who had it stashed in a shed on his property - he couldn't remember when he acquired it.
Here it is after a clean up:
I have fitted new grips, a new reflector and a new shift cable here. I put on a new back tire as well. It's fitted with a 3 speed AG hub, dated 8/58. All the gears work, and there's the remnants of a card attached to the light which tells you what bulbs it uses. The lights still work.
Not a lot of wear on the cog:
Anybody know how long it takes the rubber grips to go like this?
Inside the rear mudguard is very clean and well preserved. Note the Triumph script on the cog:
I had to put a modern style shifter cable on because when I changed the rear tyre, I had to undo the original cable end. It untwisted the cable and it was weakened a lot. In hindsight (which is always 20/20,) I should have put a couple of drops of oil down the cable end so it let go of the cable and didn't untwist it. I will know for next time.
A little bit of rust:
It's missing a couple of bits - a pedal end cap, and an original style reflector, but it's incredibly complete and original for it's age. I have ridden it a few times but I suspect you'd end up with thighs like tugboats if you rode it every day. Plans are to find the missing parts and clock up a few miles on it.
Here it is after a clean up:
I have fitted new grips, a new reflector and a new shift cable here. I put on a new back tire as well. It's fitted with a 3 speed AG hub, dated 8/58. All the gears work, and there's the remnants of a card attached to the light which tells you what bulbs it uses. The lights still work.
Not a lot of wear on the cog:
Anybody know how long it takes the rubber grips to go like this?
Inside the rear mudguard is very clean and well preserved. Note the Triumph script on the cog:
I had to put a modern style shifter cable on because when I changed the rear tyre, I had to undo the original cable end. It untwisted the cable and it was weakened a lot. In hindsight (which is always 20/20,) I should have put a couple of drops of oil down the cable end so it let go of the cable and didn't untwist it. I will know for next time.
A little bit of rust:
It's missing a couple of bits - a pedal end cap, and an original style reflector, but it's incredibly complete and original for it's age. I have ridden it a few times but I suspect you'd end up with thighs like tugboats if you rode it every day. Plans are to find the missing parts and clock up a few miles on it.
Wow! A wonderful bicycle for sure. I have spent years looking for a vintage Triumph to keep my TR7 company in the garage. Great find. Let me know if you want to sell it.
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
Senior Member
Join Date: Oct 2016
Location: Sacramento, CA
Posts: 458
Bikes: 2017 Surly Cross-Check. 2020 Specialized Turbo Vado 3.0, 2002 GT Dyno Roadster, 2002 Rans Stratus, 2020 Giant Fathom 2, 2011 Trek Pure Sport
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 171 Post(s)
Liked 85 Times
in
62 Posts
i am sure she will love it- my wife loves her drop bar bike but when we go out together on old 3 speeds we get all the nice smiles and gestures from folks which we both love. And that basket is perfect for some cold wine and fresh bread and cheese!
Nice job - i really like the look of that build.
Nice job - i really like the look of that build.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Hi everyone, I'd like to show you a 1958 Triumph I got recently. I got it off a farmer friend who had it stashed in a shed on his property - he couldn't remember when he acquired it.
Here it is after a clean up:
I have fitted new grips, a new reflector and a new shift cable here. I put on a new back tire as well. It's fitted with a 3 speed AG hub, dated 8/58. All the gears work, and there's the remnants of a card attached to the light which tells you what bulbs it uses. The lights still work.
Not a lot of wear on the cog:
Anybody know how long it takes the rubber grips to go like this?
Inside the rear mudguard is very clean and well preserved. Note the Triumph script on the cog:
I had to put a modern style shifter cable on because when I changed the rear tyre, I had to undo the original cable end. It untwisted the cable and it was weakened a lot. In hindsight (which is always 20/20,) I should have put a couple of drops of oil down the cable end so it let go of the cable and didn't untwist it. I will know for next time.
A little bit of rust:
It's missing a couple of bits - a pedal end cap, and an original style reflector, but it's incredibly complete and original for it's age. I have ridden it a few times but I suspect you'd end up with thighs like tugboats if you rode it every day. Plans are to find the missing parts and clock up a few miles on it.
Here it is after a clean up:
I have fitted new grips, a new reflector and a new shift cable here. I put on a new back tire as well. It's fitted with a 3 speed AG hub, dated 8/58. All the gears work, and there's the remnants of a card attached to the light which tells you what bulbs it uses. The lights still work.
Not a lot of wear on the cog:
Anybody know how long it takes the rubber grips to go like this?
Inside the rear mudguard is very clean and well preserved. Note the Triumph script on the cog:
I had to put a modern style shifter cable on because when I changed the rear tyre, I had to undo the original cable end. It untwisted the cable and it was weakened a lot. In hindsight (which is always 20/20,) I should have put a couple of drops of oil down the cable end so it let go of the cable and didn't untwist it. I will know for next time.
A little bit of rust:
It's missing a couple of bits - a pedal end cap, and an original style reflector, but it's incredibly complete and original for it's age. I have ridden it a few times but I suspect you'd end up with thighs like tugboats if you rode it every day. Plans are to find the missing parts and clock up a few miles on it.
Senior Member
Join Date: Oct 2016
Location: Sacramento, CA
Posts: 458
Bikes: 2017 Surly Cross-Check. 2020 Specialized Turbo Vado 3.0, 2002 GT Dyno Roadster, 2002 Rans Stratus, 2020 Giant Fathom 2, 2011 Trek Pure Sport
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 171 Post(s)
Liked 85 Times
in
62 Posts
Nice Triumph! I used to have an old Triumph Motorcycle that I poured hours of love and lots of money into. It was a 1970 Tiger 650 (Like a Bonneville, but with a single carburetor)
Newbie
Join Date: Feb 2013
Posts: 35
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, I put the following parts on the 72 Sports I acquired last May.
Brooks B17 Narrow I found on ebay last week for $36 shipped.
Pletscher rack I found for free at the local coop. (well $50 a year for all the parts, tools and mechanical advice I could ask for.)
Flipped the bars.
New nickel chain.
Schwalbe cream tires.
Put a Rhinodillo liner in the rear wheel.
The coop guys helped me with the chain and the liner. Tools and advice are well worth the cost. Will post pics when i ht 10. I'm pretty happy with the results so far. I need a 22T cog now.
Brooks B17 Narrow I found on ebay last week for $36 shipped.
Pletscher rack I found for free at the local coop. (well $50 a year for all the parts, tools and mechanical advice I could ask for.)
Flipped the bars.
New nickel chain.
Schwalbe cream tires.
Put a Rhinodillo liner in the rear wheel.
The coop guys helped me with the chain and the liner. Tools and advice are well worth the cost. Will post pics when i ht 10. I'm pretty happy with the results so far. I need a 22T cog now.
Senior Member
Join Date: Jun 2017
Posts: 920
Bikes: Diamond Back Apex, Mongoose IBOC Aluminum Road Bike, SR road bike
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 515 Post(s)
Liked 167 Times
in
116 Posts
Oh, I also later owned a 1978 Triumph Spitfire.
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
Beautiful Triumphs all round. The 3 speed is perfect, love the colour matched rear reflector/light.
The motos are all so nice, no kinks in the exhaust pipes. The lines are so much nicer than the new models.
The motos are all so nice, no kinks in the exhaust pipes. The lines are so much nicer than the new models.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
The English bicycles and motorcycles shared a common feature through the 60s and 70s. They were not quick retool their factories and incorporate the latest technology into their products. They were criticized for this at the time, but this is the very reason I'm so fond of them to this day. A 1978 Raleigh Sports isn't all that different from a 1948 Raleigh Sports and I say that's a good thing. That and the fact that splayed port British twins were available for so long. Such a beautiful, classic design.
Senior Member
Does this lot make me a Triumph enthusiast? Here's mine...
(I fitted the Triumph crank to the bicycle - how could I resist?)
(I fitted the Triumph crank to the bicycle - how could I resist?)
Senior Member
Join Date: Jun 2017
Posts: 920
Bikes: Diamond Back Apex, Mongoose IBOC Aluminum Road Bike, SR road bike
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 515 Post(s)
Liked 167 Times
in
116 Posts
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
@IEthatsME You sure do qualify as a Triumph fan! Glad you found an old style crank for your bike. Raleigh started skimping and used the standard chainring on their captive brands in the 60s. That was a mistake and you corrected it. Looks great.
Junior Member
Join Date: Oct 2017
Posts: 13
Bikes: Fuji CX, 1958 Triumph
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Some nice Triumphs up there ^^ Funnily enough, I learnt to drive in a 1963 Triumph Herald like this one - same colour and body style:
browngw - I'll sell it eventually but I'm in Scotland. Nice TR7.
browngw - I'll sell it eventually but I'm in Scotland. Nice TR7.
Senior Member
Join Date: Jan 2007
Location: Ontario
Posts: 2,648
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 478 Post(s)
Liked 634 Times
in
336 Posts
Originally Posted by clubman
The motos are all so nice, no kinks in the exhaust pipes. The lines are so much nicer than the new models.
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 444 Times
in
288 Posts
Haha, I used to own a 1967 Bonneville. Fun bike. My friend had a BSA Lightning around the same vintage, and we used to go blasting down roads while listening to their symphony through megaphone exhausts. Also reminds me of having to tickle the carbs in the morning for the first start of the day. Fun times.
Oh, I also later owned a 1978 Triumph Spitfire.
Oh, I also later owned a 1978 Triumph Spitfire.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Sometimes I'll ride with others who ride modern bikes. They hop on their bikes, push the button and are ready to go. They have to wait patiently for me to go through my starting routine. First, I have to use the kick start pedal to free up the clutch. It will grind into first if I don't. Then I open the gas valve (petcock). Then I tickle the carbs to flood the float bowls. Then I wipe the gas off my hands on my pants. At this point I'm ready toturn on the ignition and use the kick to get the motor up to compression, jump up in the air and follow through. One or two times usually does it. Then I blip the throttle a bit until the idle sets in. Then...I'm ready to go.
Senior Member
Join Date: Jul 2016
Location: Groningen
Posts: 1,308
Bikes: Gazelle rod brakes, Batavus compact, Peugeot hybrid
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
Quoted: 5999 Post(s)
Liked 956 Times
in
730 Posts
Senior Member
Join Date: Jun 2017
Posts: 920
Bikes: Diamond Back Apex, Mongoose IBOC Aluminum Road Bike, SR road bike
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 515 Post(s)
Liked 167 Times
in
116 Posts
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 444 Times
in
288 Posts
Sometimes I'll ride with others who ride modern bikes. They hop on their bikes, push the button and are ready to go. They have to wait patiently for me to go through my starting routine. First, I have to use the kick start pedal to free up the clutch. It will grind into first if I don't. Then I open the gas valve (petcock). Then I tickle the carbs to flood the float bowls. Then I wipe the gas off my hands on my pants. At this point I'm ready toturn on the ignition and use the kick to get the motor up to compression, jump up in the air and follow through. One or two times usually does it. Then I blip the throttle a bit until the idle sets in. Then...I'm ready to go.
A-there's no puddle of oil underneath.
Even the restored bikes at The British Motorcycle Museum in Birmingham all had drip pans under the crankcase.
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,801
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
^^^