![]() |
Which Is why I never break chains. :)
|
Originally Posted by Scrodzilla
(Post 13700783)
I've never broken one. The Rivoli I keep in my toolbox is about 3 years old and has been used hundreds of times.
I've had a CT-3 for at least a decade other than changing the pin a few times I can say its been very reliable |
My CT-3 actually sucked. I have no idea how I ****ed it up but it happened. I even bought a new pin for it and it still couldn't rotate straight anymore.
|
Scrod,
What should I wear to this ski/winter themed party without having to sweat my *** off? |
Tighty whiteys and a ski mask.
|
Originally Posted by Scrodzilla
(Post 13702446)
Tighty whiteys and a ski mask.
|
Originally Posted by Scrodzilla
(Post 13702446)
Tighty whiteys and a ski mask.
|
scrod is a 19mm seatpost bolt the right size for the 722 clamp? I measured and it seemed the one I got was 20mm (the problem wasn't the length but fitting into each other), so I'm guessing I'm measuring just a bit off or 19mm should be fine. Just want to make sure
|
How bad is my avatar? :D
|
ham - you should be all set with a 19mm bolt.
Dan - I heard it was much worse than it really is. |
It took me all of 3 minutes to make it.
|
Any suggestions on maintanence books? Since my wreck I want to take apart my bike to do a full inspection on what went wrong with the drive train etc. I don't feel like paying $150 down at the LBS. Thanks.
|
What tool can I use to remove my Miche BB?
|
|
Originally Posted by xavier853
(Post 13711050)
What tool can I use to remove my Miche BB?
|
Originally Posted by Scrodzilla
(Post 13711404)
If it's anything like the Miche bottom brackets I've had experience with, your hand.
http://www.greggscycles.com/images/l..._fr_1_08_m.jpg |
Originally Posted by seau grateau
(Post 13711271)
|
Originally Posted by seau grateau
(Post 13711881)
For real, it works.
|
Scrod,
Have you ever tried Aguardiente? If not I highly recommend it. EDIT: Sorry, it is off topic. Not bicycle related at all. Imbibing it influenced me to post the question. |
Originally Posted by PlattsVegas
(Post 13713439)
Scrod,
Have you ever tried Aguardiente? If not I highly recommend it. |
Dear Scrod,
When truing a wheel do you take the the tubes and tire off, or leave them on? I normally take them off, but I know people that say to leave them on and some people say to just deflate the tire, and some say to leave it fully inflated. |
It depends. I usually leave the tire on unless the rim has a stubborn hop.
|
dear scrod: why are phil wood cogs so f'n loud?
|
So... I have a dance tomorrow night. Should I dance with everyone else or stand awkwardly on the dance floor and talk?
|
Originally Posted by homebrewk
(Post 13717525)
So... I have a dance tomorrow night. Should I dance with everyone else or stand awkwardly on the dance floor and talk?
I think females are the only people who can go to a dance, not dance at all, and keep their cool points. Like my high school homecoming date, who only wanted to slow dance, which was fine with me. |
| All times are GMT -6. The time now is 03:19 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.