A couple questions
05-02-14 | 05:29 PM
#1
Thread Starter
Senior Member
Joined: Nov 2010
Posts: 15,315
Likes: 903
From: Tixkokob, Yucatán, México
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
A couple questions
Hi All,
Who can tell me how to properly mount these two gizmos?
Thanks
Who can tell me how to properly mount these two gizmos?
Thanks
05-02-14 | 07:40 PM
#2
Senior Member
Joined: Feb 2012
Posts: 19,356
Likes: 5,478
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
This "two" gizmo looks to be a light housing for a generator driven light system. The mounting bracket is likely missing the portion that fits behind a handle bar stem binder bolt or that fits on the brake center/mounting bolt. This could also be a tail light in which the bracket might attach to a rack or fender mount, at the rear drop out. On second look the bracket has a dog leg offset to it so a tail light is the more likely guess. Andy.
05-02-14 | 07:57 PM
#3
Thread Starter
Senior Member
Joined: Nov 2010
Posts: 15,315
Likes: 903
From: Tixkokob, Yucatán, México
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Edit:,The second gizmo
And yes, there is a dogleg on the light mount. I tried to put on the fork with no success. Maybe it is indeed a tail light.
And yes, there is a dogleg on the light mount. I tried to put on the fork with no success. Maybe it is indeed a tail light.
Last edited by seedsbelize; 05-02-14 at 08:01 PM.
05-02-14 | 10:26 PM
#4
Senior Member
Joined: Feb 2012
Posts: 19,356
Likes: 5,478
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
This second gizmo is a Rhode Gear mirror. It's bracket is shaped to go over a drop bar brake lever body/hood. There was a velcro strap that wrapped around the lever body and bracket holding it together. many found that this added bulk to the LH lever was not comfy and this mirror didn't sell well in the shops i worked in. Andy.
05-03-14 | 08:08 AM
#5
Thread Starter
Senior Member
Joined: Nov 2010
Posts: 15,315
Likes: 903
From: Tixkokob, Yucatán, México
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Thanks Andy. I've been thinking about mounting it just like in the pic, with either velcro or a zip tie.
Thread
Thread Starter
Forum
Replies
Last Post
stdlrf11
Electronics, Lighting, & Gadgets
5
01-29-16 08:40 AM
