Identify Reynolds 753 Fork?
04-09-17 | 07:28 PM
#1
Thread Starter
Senior Member
Joined: Aug 2011
Posts: 1,489
Likes: 23
From: Milan, Ohio
Bikes: Tomii Touring
Identify Reynolds 753 Fork?
Any idea what this is from?
20170409_201954 by flog00, on Flickr
20170409_201938 by flog00, on Flickr
20170409_201954 by flog00, on Flickr20170409_201938 by flog00, on Flickr
04-09-17 | 09:15 PM
#4
Senior Member
Joined: Apr 2009
Posts: 39,897
Likes: 3,865
From: New Rochelle, NY
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
As collector, the back story may be important.
But as a rider, that's a nice fork that anybody should be happy to own.
But as a rider, that's a nice fork that anybody should be happy to own.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
04-09-17 | 09:43 PM
#5
Not lost wanderer.
Joined: Jan 2013
Posts: 3,686
Likes: 1,425
From: Lancaster, Pa
Bikes: Cambodia bike,2012 Fuji Stratos...
I don't know but is it the start of something new?
It would be a nice fork to go steel on this titanium over that ugly crabon/aluminium
https://www.bikeforums.net/classic-vi...-hs-59x59.html
It would be a nice fork to go steel on this titanium over that ugly crabon/aluminium
https://www.bikeforums.net/classic-vi...-hs-59x59.html
__________________
72 Geoffery Butler, 72 Gugificatizion Witcomb, 72 Raleigh Gran Sport SS, 74 Raleigh GrandPrix dingle speed, 74 Raleigh international, 81 Centurion Pro-Tour, 85 Gazelle Primeur, 29rBMX, Surley Steamroller 650b
72 Geoffery Butler, 72 Gugificatizion Witcomb, 72 Raleigh Gran Sport SS, 74 Raleigh GrandPrix dingle speed, 74 Raleigh international, 81 Centurion Pro-Tour, 85 Gazelle Primeur, 29rBMX, Surley Steamroller 650b
Last edited by bwilli88; 04-09-17 at 09:46 PM.
10-13-20 | 07:12 PM
#6
Full Member
Joined: May 2009
Posts: 484
Likes: 9
I bought one of these on ebay in the summer except it does not have the triangular decal or the cutout on the outer side of the crown. Mine is metallic white and like the one sold on bikerecyclery. https://***********************/vintage...hreaded-white/ I believe the 31mm rake spec in the ad is supposed to be 41mm.
The seller says mine was from a Raleigh Techium, which makes sense since those bonded frames fell apart leaving these white brazed forks on the market.
I was considering getting a custom Kaisei fork built but the expense and especially the wide fork crowns made for those blades I find ugly.
Anyone got more info on the these 753 forks?
The seller says mine was from a Raleigh Techium, which makes sense since those bonded frames fell apart leaving these white brazed forks on the market.
I was considering getting a custom Kaisei fork built but the expense and especially the wide fork crowns made for those blades I find ugly.
Anyone got more info on the these 753 forks?
Last edited by avhed; 10-13-20 at 07:21 PM.
10-14-20 | 10:09 AM
#7
as I understand things the 753 forkblades were similar to regular 531 in that they are "taper gauge" but said to be thinner walls and because 753 is heat treated they come pre-raked from Reynolds and cannot (or SHOULD not) be re-set. That forkcrown is very common but not sure of the brand (Cinelli, anybody?), I was just looking at a FUSO fork, yesterday, that used the same crown.
10-14-20 | 11:25 AM
#8
Bike Dealer since 1972
Joined: Dec 2007
Posts: 288
Likes: 71
From: Eastern North Carolina
Bikes: Some of the bikes I've collected: Raleighs ( about 20), Trek ( oldest 1978 770 Columbus tubes), Mercian, Condor, Bob Jackson, Falcon, Holdsworth, Jacques Anquetil, Bianchi, LeMond, Cannondale, Schwinn, Iver Johnson, Dunelt
How about this? Is Raleigh the only one to glue 753 together
10-14-20 | 12:21 PM
#9
Not saying that it never happened, but while I've read vague off-hand mentions of Technium frames falling apart over the years, I haven't seen any photos or read any first-hand testimonials of such failures.
Sorry for the digression, all.
10-14-20 | 01:10 PM
#10
Newbie
Joined: Jul 2020
Posts: 34
Likes: 19
From: North Jersey
Bikes: 72 Iverson Drag Stripper, 81 Raleigh Super Course, 82 Appel 531, 82 Falcon 753, 83 Pinarello Record SL, 85 Strawberry SL, 97 Cannondale F1000, 84 Cilo/Vitus
Fork end and front hub
The fork ends look the same as my 82 Falcon 753. But, it could be standard issue. But the fork crown looks like the Raleigh in the earlier picture.
Last edited by bg18947; 10-14-20 at 02:25 PM.
10-14-20 | 02:22 PM
#11
Bike Dealer since 1972
Joined: Dec 2007
Posts: 288
Likes: 71
From: Eastern North Carolina
Bikes: Some of the bikes I've collected: Raleighs ( about 20), Trek ( oldest 1978 770 Columbus tubes), Mercian, Condor, Bob Jackson, Falcon, Holdsworth, Jacques Anquetil, Bianchi, LeMond, Cannondale, Schwinn, Iver Johnson, Dunelt
You may be thinking of the bonded Alan and Vitus frames falling apart. I sold those Technium bonded bikes in a bike shop throughout the period that Raleigh USA was marketing them, and we never saw any failures. After all, Raleigh USA did establish the Technium factory in Kent, WA, expressly to make it easy to hire Boeing engineers with aerospace design experience.
Not saying that it never happened, but while I've read vague off-hand mentions of Technium frames falling apart over the years, I haven't seen any photos or read any first-hand testimonials of such failures.
Sorry for the digression, all.
Not saying that it never happened, but while I've read vague off-hand mentions of Technium frames falling apart over the years, I haven't seen any photos or read any first-hand testimonials of such failures.
Sorry for the digression, all.
The fork does look like a match.
10-14-20 | 02:46 PM
#12
As I recall, the rings were merely cosmetic and served only to cover the join line. The people who have posted here about damaged Technium bikes crashed them or drove into a garage with the bike on a roof rack. Bent frame tubes, but intact bonded joints.
10-14-20 | 06:37 PM
#13
Old fart
Joined: Nov 2004
Posts: 26,401
Likes: 5,333
From: Appleton WI
Bikes: Several, mostly not name brands.
Thread
Thread Starter
Forum
Replies
Last Post
Flog00
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
2
09-29-14 06:14 AM
