WTB: Stronglight 93 left (non-drive) crank arm, 170, threading unimportant in passable condition. In other words I can polish it up to make it presentable if need be.

I am going to try one more time....if anyone has one PLEASE !!!!!!!!!!!! let me know , can't find one anywhere...any make any brand as long as it is 80-90 mm , 1" diameter , silver , 25.4 handlebar

I need a Silver, 90mm long, mtb quill stem....something like this

http://cgi.ebay.com/ws/eBayISAPI.dll...53D1%26fvi%3D1
SR SAKAE ALLOY QUILL STEM CABLE STOP POSITIVE RISE, NOS - (eBay item 230182095256 end time Jan-13-08 20:06:30 PST)

I tried this guy but he was having some troubles and couldn't ship and refunded my nmoney.. if anyone has one please pm me...

If you can deal with slightly longer (100mm), then it seems to be a QBP item... available from AEBike. http://aebike.com/page.cfm?PageID=30...ils&sku=SM4080

I just ordered one of these from my LBS.

Jenson also had one and I ordered it but the 100mm is too long....if I could fine one in 80-90mm it would be alright but no one has a 80-90 Kalloy...everyone has the 100mm....thanks anyway

it pisses me off, this ebay guy has 8 but he has "problems" and can't deal with sending out 1 stem because he has "problems"....

Nitto makes an 80mm extension riser stem, the Dirt Drop: http://cgi.ebay.com/NITTO-Dirt-Drop-...sid=p1638.m118

Quite a bit more pricey than the Kalloy, however.

Neal

+1! :D

My wife's Interclub has that stem with upwrong bars.

Very easy to wheelie! :rolleyes:

Rivendell also carries the Nitto Periscopa with a 25.4 clamp, but the extension may be too short for you.

http://www.rivbike.com/products/list...product=16-131

EDIT: This vendor lists it as an 80mm extension: http://shop.vendio.com/benscycle/ite.../?s=1197977440

are kinda cheap.


http://www.universalcycles.com/shopp...&category=1734

just checked in, thank you all very much....the nitto stem at rivbikes is perfect....just ordered and can finish off the bike for my kid....

Merry Christmas all and thanks again

I'm looking for two things:

--A SunTour Cyclone MkII rear derailleur for a 6/7-speed setup
--A Shimano 105 headset wrench, the kind with the flower-shaped bits (consider renting this one to me!)

Thanks,

Neal

iso: a set of centerpull mafac racer brakes.

Check your PM.

check your other PM

WTB: A Shimano 600 "Arabesque" crankset w/ or w/out rings.

Thanks!

Neal

ISO/WTB:

One Araya Aero-2 Tubular. 36h Silver.
Tevano Pista Cranks, 165mm

WTB

Black Brooks Pro w/ big rivits.

Looking for the following for several projects:

-90-100mm 3ttt Record 84 stem, smoked silver finish, 26.0 clamp size
-Early 90s Campy aero brake levers in good shape - prefer alloy, but let me know what you have. (Do these even exist?) OR Modolo Pro aero levers in black.
-Superbe Pro front derailleur, 28.6mm clamp
-Superbe Pro brake calipers, hidden spring

Thanks in advance.

ISO: shimano 600 left downtube shifter (for a 1986 miyata)

Looking for an ugly but serviceable pair of early 70's-ish Campag D/T (clamp on) Shifters to complete the Bottecchia.

Also looking for the expander screw thing for a 70's Shimano bar end shifter, mine snapped.

WTB: A set of alloy Raleigh Sprite type bars. I know I've seen them on some models, since they were light silver and not chrome. They look like the Milan bar on Velo Orange, but hopefully won't cost $19 plus shipping. They will be used in lightening up my Sprite. Alloy wheels and no dork disc helped, but it still has that 20/30 "heft" to it. My super grand prix with a 3-4 inch larger frame feels lighter;),,,,BD

I'd just rather have the original Raleigh part mainly. The Raleigh branded cranks and other parts can come from the SGP.


http://www.velo-orange.com/milanbar.html

WTB

A couple of front cable hangers (with adjusting barrels) for center pull brakes, 1" steerer tube like this one...

http://i243.photobucket.com/albums/f...neredit006.jpg

Dante

Shimano 105 left crankarm - early 90's with the matte silver finish. Can buy or trade or do dishes.

1 in carbon threadless fork

These are comparable to the Weinmann hoods...

http://www.thethirdhand.com/index.cg...d=622539020885

They fit the same, but don't say Weinmann on the sides. Not sure if your looking for an exact match.

Dante

Those are decent, I have them on my Voyageur. Not real gum I believe, but looks very close from a few feet away.,,,,BD