ISO 48cm (East Hill size :D ) road frame (or a complete bike)

My sister has decided that she doesn't like riding her cruiser (looks like a mid-'70s Raleigh, and about 40 pounds) around anymore and wants something lighter and faster - so I decided to build one up for her birthday. I'd prefer if it took 700s just for ease of finding tubes and tires. She's about 5'2 with short legs, I haven't been able to put her on a bike to confirm but she said that she measured herself and put it into an online calculator and it told her a 48.

Budget is something of an issue, and I'm not looking for a Colnago. If I could get something that isn't hi-ten and preferably not old French (my stock of French threaded/sized parts is low), I'd be happy.

I'm in NYC without a car, although I can get on Metro-North/NJ Transit/rent a Zipcar if it comes to it.


ALSO:

In need of two 1" threaded headsets - I'd dearly love Dura-Ace HP-7400s, mine is decent on the outside but pitted to hell. Other, interesting old Japanese headsets a possibility too. Have one of those damn 600 ones with the scalloped nut that's impossible to find the tool for, so not one of those :D
Have cash and a small stash of parts for tradin'.

There were 2 nice 49 cm complete bikes on eBay not 2-3 days ago.

touring panniers- front or rear or a complete set

specifically looking for grey cannondale panniers or eclipse panniers

front rack- one with a front platform would be awesome

nashbar 6-pack rack

ISO a 1" threaded fork with at least 7" of steerer, preferably for 700c wheels. Bonus points for a polished or chrome fork.

I was looking for some other stuff and remembered your ISO. Is this was you're looking for?

http://images.andale.com/f2/115/106/...SC_locknut.jpg

http://www.bikeville.com/headsets.html


lots of other good stuff there, too.

stan
.

That's it. Overpriced though, and I refuse to deal with Bikeville (mainly as they seem to refuse to bother with pesky customers).

-Kurt

WTB by extension: Mixte in northern NJ area, small frame for a diminutive lass.

Expl: I had a Dunelt for sale and a Panasonic, both womens, both 19" frames. A prospective buyer in northern NJ needs about an 18" frame or so, and she asked me if I had one. I don't, but I recommended a mixte, and by way of explanation sent her a pic off a thread. She responded (in all caps), wants one, and is serious.

Perhaps someone in the know in northern NJ can point me to a source so I can point her to it.

Want:

Pully for a Red Simplex rear derailleur.

Thanks

IDÉAL SADDLE QUEST

I've been putzing with the Moto Le Champion and am a couple weeks from finished. I'd love to find a nice but reasonably priced Idéale 2001 or 90 to replace the current Turbo Hinault (offered as a partial trade).

I need a 1/4" length of brake bridge tubing to make patches for the brake bridge on my old battered track bike. Someone drilled it... TWICE! so I need to spend some time with my jeweler's saw and cut out four tiny circles. Really... just one-quarter of an inch will be all that I need. I'm willing to trade, if there's any bit of hardware you need that I have, and will also fit in a small envelope.

^
You might want to post that on the Framebuilders forum - I dare say you'll have some in no time.

-Kurt

I need one Raleigh fender nut-and-bolt set. I'm talking about the bolt with a hole in it, and the nut that threads onto it. There's probably a washer or two in there; I'll need them too, but can scrounge if necessary.

I also need the clip that holds the bottom/front end of a Raleigh fender to the bridge that connects the chain stays.

try stacks79 on eBay

EDIT: He doesn't have anything presently for sale.

P.S.: Also looking for a pair of stays for a third (final)-gen Raleigh Sprite. For 27" box-section fenders.

-Kurt

Wanted To Buy/ISO:

Alloy stem: 21.1mm (0.833") quill diameter, 130mm horizontal extension and quill height at least 200mm (8").

To make my '80 chrome Schwinn Voyageur fit.

Someone liberated the rear reflector on my Twenty. So I am in the market for a replacement.
This is the best pic I have. Its a 1978.
At least they didn't scratch the paint to much.
http://i23.photobucket.com/albums/b4...0/DSC01857.jpg

flite saddle(s)- black/white/whatever smooth or perforated

Just got my Panasonic Team America and it appears as if one of my brake caliper parts didn't make the trip... darn :(

Looking for one of these buggers for Dura Ace caliper circa '86
http://lh4.ggpht.com/scarsgo/SCuTOO1...JPG?imgmax=400

Also, any line on replacement brake hoods?
http://lh6.ggpht.com/scarsgo/SCuTSu1...JPG?imgmax=400

i need a campy two bolt record (nuovo?) seatpost in 26.8mm. anyone?

Still looking for a set of Shimano 8 spd D/T shifters for my touring bike. I'm wanting to put the wide
8spd wheels back on my Shogun, and use the pretty rims for something else.,,,,,BD

Looking for around 100 cm of ruby red (not rose) brake cable housing.

Need: Foil world champ seat tube stickers. I seem to remember an ebay seller with a bunch, but I can't find the store

Probably Greg Softley. User name gts753

I'm looking for the hardware for Shimano 105 pd-1050 pedals. The hardware attaches the toe clips to the pedal.

thanks

ISO steel frame road bike for a guy about 6' tall with 32" inseam, in the $100 range. Doesn't have to be fancy or high-end for its time, but it should be clean and in ridable condition (I can put on new tires, but I don't want to grease bearings). Friction shifters, quill stems, etc., all okay (as long as nothing's stuck). I'm pairing it with a fine Raleigh Marathon mixte for my DIL--this bike will be for my son--so I'd like there to be something special about it (color, style, whatever).

I'll take a garage sale flip, and can pick up in a 150+/- radius of the NW corner of Arkansas (Tulsa, Springfield, MO, Little Rock, etc.). Will go a little farther for the right bike at the right price.

I know THE bike is out there. PM me please!

Karen