|
Should have tried for the interception! ;) That should make for a nice ride Shoota!!
|
Free to someone who needs bits to make complete Barcons. I got a few parts gratis from Wheels of Steel (thanks!), and I'm paying forward the leftovers plus a thing or two from my stash. Whoever gets these, please consider paying forward anything you don't need.
http://www.thejennifers.com/Bike_Pics/BarconBits.JPG |
Originally Posted by rccardr
(Post 16367962)
That's the idea. The dent's not a safety issue and it will make shoota a great riding bike.
Originally Posted by RubberLegs
(Post 16370332)
Should have tried for the interception! ;) That should make for a nice ride Shoota!!
|
MORE!
Zefal pump, pair of Look arc pedals, single (right side, but whatever) Shimano 6400 brake leber (lever worn, hood good) , Specialized Body Geometry saddle (orange and black) and a Michelin superlight inner tube, 700 X 23. Yours for the cost of shipping, individually or as a group: http://i797.photobucket.com/albums/y...psc5c1583a.jpg |
AND YET MORE!
Pair of OK but skightly ratty and probably need new pads Shimano 600 6208 brake calipers (only one adjuster), pair of Dia Compe Gran Compe levers- hoods good, the ones that have a cable permanently attached to the brake base, use your own secondary cable; Lapize toe clips with bolts, again, separately or as a group, yours for the cost of shipping. http://i797.photobucket.com/albums/y...ps86dfb71a.jpg |
Pump, levers, pedals, tube and saddle have been claimed.
Toe clips, single Shimano 600 lever and brake calipers are still available. That single lever and a caliper (there's probably one good set of pads between them) would look nice on, shall we say, a fixie? With the toe clips = HIPSTER! |
If still available, I'd like to have the 600 calipers. Sorry, I haven't posted enough to be able to PM.
Regards, Dwayne |
I will take the Gran Compe levers. PM sent.
|
Dwayne, the calipers are yours. Send me an e-mail at rccardr@cox.net and we'll figure out the details.
Bob, sorry, the levers went to WNG. Single 600 lever and toe clips remain... |
MORE! All free for the cost of shipping. PM me or send an e-mail to rccardr@cox.net
Pair of complete Shimano 600 6208 indexed 6 speed DT shifters. All of the little pieces and brass washers included, these mount to 'standard' down tube braze-ons, can be used as either friction or indexed. Yes, these are the somewhat fragile ones, please note that only two of the six indexing tangs remain. Still, should work well for a long time and can always be used as friction shifters (some of my favorite). They also polish up AWESOME, look just like chrome plating: http://i797.photobucket.com/albums/y...ps7faca034.jpg Another Zefal frame pump. Honestly, I have no idea where these come from, as I don't use a frame pump and I try to give them away whenever one comes on a bike purchased. Perhaps they...breed? http://i797.photobucket.com/albums/y...ps486a0718.jpg A Sella Italia Flite Genuine Gel saddle, this is one of the 1987 leather-and-fabric models. Some wear but no scuffs, still plenty of butt-satisfying miles left in this one: http://i797.photobucket.com/albums/y...pse501e261.jpg http://i797.photobucket.com/albums/y...ps54dab242.jpg http://i797.photobucket.com/albums/y...ps496c6677.jpg http://i797.photobucket.com/albums/y...psc1c7cc85.jpg |
Saddle's been claimed, pump and shifters still available. Unless someone grabs them in the meantime, somebody's going to get a surprise brake lever and toe clips in their box...
|
Originally Posted by rccardr
(Post 16382657)
Saddle's been claimed, pump and shifters still available. Unless someone grabs them in the meantime, somebody's going to get a surprise brake lever and toe clips in their box...
|
pm sent on second pump & shifters...
|
Everything has been claimed!
|
2 Attachment(s)
|
I found this Minolta Maxxum 3 in the electronics recycle pile. Someone had set it to the side, carefully with the extra lense so maybe it's Ok. No garantees, though. If you still dig film, try it out.
http://i291.photobucket.com/albums/l...pse0c81be7.jpg |
I might have a coworker interested in the camera, I'll ask him. He is all artsy-fartsy with film....I can barely use a point and shoot at times!
|
Nice camera, someone will be super happy to get it!!
|
If no one else takes it I'd certainly be happy with it!
|
lenses should also work with Minolta DSLRs too, right?
|
Originally Posted by RubeRad
(Post 16516365)
lenses should also work with Minolta DSLRs too, right?
|
Originally Posted by sailorbenjamin
(Post 16515635)
I found this Minolta Maxxum 3 in the electronics recycle pile. Someone had set it to the side, carefully with the extra lense so maybe it's Ok. No garantees, though. If you still dig film, try it out.
http://i291.photobucket.com/albums/l...pse0c81be7.jpg |
Let's see here, one of them is an AF Zoom 0.38m/1.3ft macro. Around the lense it says AF Zoom 35-80mm 1:4 (22)-5.6 Then there's the little o with a diagonal slash through it and 49mm.
The other says AF Zoom 1.1m/3.6ft macro. Around the lense it says AF Zoom 70-210mm 1:45 (22)-56 and again the little o 49mm. I can take pictures of the bayonette mount if anyone wants. |
I know this is old, but I didn't see any takers - so if the parts are still avalable, I'd be happy to take them.
PM me |
Originally Posted by dweenk
(Post 16517802)
I know this is old, but I didn't see any takers - so if the parts are still avalable, I'd be happy to take them.
PM me |
| All times are GMT -6. The time now is 03:19 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.