The silence is deafening....nobody wants this beauty? Might be yours Frank.

I seem to recall seeing someone mentioning the desire to have an odometer with dual mileage capability. Since I can't find that message after a couple of searches, I will offer it here.

As I was cleaning my garage yesterday, I noticed a wheel that has an Avocet odometer attached with dual mileage. I am assuming it is calibrated in miles since it is in the US, but I didn't really look.

I will post a picture later if needed, but it is one of the units that hooks to the front axle, and uses a pulley to advance the odometer instead of the peg that clicks against the star shaped appendage to move the mileage.

I didn't check, and I don't know if Avocet had different models, but I believe it is currently on a 27" rim.

Free for the cost of shipping, and possible advice for safely removing it in case there is a trick to it (again, I didn't really look at it, so I realize it could be simple).

I know this was from a while ago but if you still have the 42cm bars I'll take them if you still have 'em

Gone .... a while ago.

Here's an odd one - anyone want a bunch of old plain white sheets? I've got a couple of boxes of them, all slightly-to-god-awful stained. They tend to pile up in the hotel biz.

Perhaps you need dust covers for bikes you have in storage, drop cloths for wrenching on bikes indoors during the winter months, or maybe you just want to treat the whole neighborhood to mummy costumes this Hallowe'en?

PM with how many you want, and I'll PM back the postage it takes to ship em to you. Also have many pillowcases in same condition.

http://i227.photobucket.com/albums/d.../photo-140.jpg

Fans of all thing French, here's a free (for the cost of shipping and am pretty sure i can coax it into a flat-rate box so $5.35 to any USA address):
Helicomatic rear hub with freewheel (or call it a cassette if you like).
The hub is 36-hole and 126mm spaced, the FW is 6-SP, 14-32, both are dirty but I squirted WD40 in both and they rotate freely...the hub is missing one of the plastic dust shields, maybe a DIYer can just cut a donut of plastic from a plastic lid and snap it in.
Don't miss this chance to add a much-maligned French product to your collection! FREEDOM hubs! :)

I want this, I've never even seen a Helicomatic with a 32T cog. Yet another PM sent.

Sold! or rather given freely, to that caveman who looks like a soft-serve cone ;)

Box of chains. Used.

Crusty old Aero bars, with armrests in better shape. Second photo show the mounting blocks to clamp them down on your existing handlebar. Not included: bolts to mound aerobars on the clamps (but standard hardware store stuff is all it takes.). Clamps look like they fit any bars between 25mm and about 26.5mm diameter

Want to ruin the looks of your go-fast machine and add a couple pounds of dead weight? These babies are yours for the cost of shipping! (Your ZIP code will be needed for that calculation.)

http://i227.photobucket.com/albums/d.../photo-152.jpg
http://www.zoominto.com/zoomapi/ZoomButt.gif



http://i227.photobucket.com/albums/d.../photo-153.jpg

For the cost of shipping:

http://i430.photobucket.com/albums/q...psb2xuam6x.jpg

Pulled from '88 Campione d'Italia. 100mm

PM please.

ISTR that caveman has a soft (serve) spot for Helicomatic bits. :)

I have frame only, no fork, Iron Horse Victory frame - nice 853 steel, somewhere around 59 cm - and didn't look like crash damage on the steerer tube - in the Checker Cab, yellow and black pattern that someone could pick up in Dayton Ohio or have for the shipping. Merry Christmas all!

I bought it to build as a spare to my Kona Kapu - but later came into a Waterford Paramount.

I will never build and ride this bike. I would love for it to go to a good home. I think it is pretty cool looking.

Non aero road levers. Pair of Mafac levers with no hoods but have white(more of a cream color now) lever hoods. One is missing the clamp and nut. The other is complete.

Also have a single Mafac lever with a decent black hood and barrel adjuster. No clamp/nut.

Then a pair of Universal levers in decent shape without hoods and a clamp for one of the levers. These match up with the Universal Mod 77 calipers I believe.

This is a take all kind of deal. I may even have some decent barely used brake cables I can toss it. No promises though.

Pay for shipping and all of your non aero brake lever dreams will come true...after finding some mounting clamps.

Also from '88 Campione:
Modolo aero levers with disintegrating hoods

http://i430.photobucket.com/albums/q...psmpp4sbg0.jpg

Moving this RH-only SunTour Alpha3000 shift lever (DT braze-on, 6S SUNTOUR ONLY indexing or "universal friction") in good condition, from trade section to here:
Free for the cost of shipping, should be about $4 or less in a padded envelope to your USA address (will vary for overseas/Canada addresses)

(1) Shimano bottom bracket derailleur cable guide
(3) Shimano downtube derailleur cable guides

PM me your address. I'll cover shipping.

Claimed

PM sent.

Free stuff!

I have a more modern trek MTb and vintage 27" wheel schwinn road bike. In various states of disrepair. Maybe some
more random stuff. These aren't anything valuable so don't expect to flip them!

come to Cape Cod MA and take them off my hands!

Have three sets of Modolo Ergo/Anatomic handlebars in decent shape, all are 26 clamp and 40 width. One shiny, one polished in center section, one dull anodized.

Yours for the cost of postage, figure $15 for one, $20 for all three.

Okay, if no one has bitten on this yet please check shipping to 23227.

Pay It Forward 2015
 

A few items for the price of shipping. All items shipped from 93950; package dimensions and weight given below for each item to get exact cost of shipping or send $3.00 per item. PayPal; Shipped USPS 1st Class.

Shimano PD-7410 Cleat Pontoons, 1 Pair
Fits PD-7410 & PD-6500 SPD
(will get pkg size in a bit)

https://farm9.staticflickr.com/8705/...f383c402_c.jpg

CyclePro inner tube 27x1
pkg = 8"x8" 5oz
https://farm8.staticflickr.com/7626/...436b2831_z.jpg


Art's Cyclery Tee-shirt
Special edition Tour of California colorway, 100% preshrunk cotton. Size Medium. 1 available.
pkg = 7"x9" 6oz
https://farm9.staticflickr.com/8713/...2acd809f_c.jpg


Gone...
Darwin Brake Levers
pkg = 7"x9" 10oz


Late 80's Lambswool saddle cover
Inside dimensions L 10" x W 7" at rear, W 1.5" at front
pkg = 14" x 11" 7oz
https://farm8.staticflickr.com/7609/...7aa787dc_c.jpg
https://farm8.staticflickr.com/7626/...3b340765_c.jpg

Don't see anything I need but let's keep this thread alive.....Good Karma!
Regards

I'll take the levers and one of the shirts. PM me your info on reimbursement. Thanks!

I have several Pyramid thorn resistant tubes in various sizes. They are heavy - as heavy as many of my tires - but they are free. You tell me what size you need, and I will tell you if I have it. I do have several kid-sized tubes, so I would package them into one shipment. They are yours for the cost of shipping.