Bike Forums
The trees of vinyl spacers which are basically ledge washers for each side the 7mm bearings that shim them down to 5mm for the Campy cage bolts.
The trees of vinyl spacers which are basically ledge washers for each side the 7mm bearings that shim them down to 5mm for the Campy cage bolts.
0 2025/07/24 18:19:19
I use them on all lines air and gas.
I use them on all lines air and gas.
0 2025/07/24 14:49:47
And the green pulleys will look better on yer bike!
And the green pulleys will look better on yer bike!
0 2025/07/23 18:29:40
Also note the lack of bolt run through the cage plates.
Also note the lack of bolt run through the cage plates.
0 2025/07/23 18:29:37
Note the Chaser Tech spacing that places the jockeys correctly in the cage plates.
Note the Chaser Tech spacing that places the jockeys correctly in the cage plates.
0 2025/07/23 18:29:35
NR rear derailleur. With upgraded sealed bearing pulleys with the correct spacing for the bolts and width of the bolts.
NR rear derailleur. With upgraded sealed bearing pulleys with the correct spacing for the bolts and width of the bolts.
0 2025/07/23 18:29:32
The Campy hub stash.
The Campy hub stash.
0 2025/07/23 09:01:03
NOS still in original plastic. Buffalo hide finish.
NOS still in original plastic. Buffalo hide finish.
0 2025/07/21 17:27:26
My idea of upgrades 300 psi hose with the Slica barb and Presta adaptor added. It will do both types of tubes with this set up. Now all I need are some Campy bumper stickers to disguise the pump. Or maybe a multi colored paint job. to repair the knicks in the paint.
My idea of upgrades 300 psi hose with the Slica barb and Presta adaptor added. It will do both types of tubes with this set up. Now all I need are some Campy bumper stickers to disguise the pump. Or maybe a multi colored paint job. to repair the knicks in the paint.
0 2025/07/20 15:17:44
Chrome tips on the chain stays and evidence of chrome under a few chips.
Chrome tips on the chain stays and evidence of chrome under a few chips.
0 2025/07/15 11:57:17
Chrome bottom bracket under the chipped blue paint.
Chrome bottom bracket under the chipped blue paint.
0 2025/07/15 11:57:12
0 2025/07/15 11:57:09
Chrome around the seat tube lugs under the blue paint.
Chrome around the seat tube lugs under the blue paint.
0 2025/07/15 11:57:05
Chrome head tube lugs under the blue paint.
Chrome head tube lugs under the blue paint.
0 2025/07/15 11:57:04
Chrome fork tips and some evidence of chrome under the crown where paint is chipped.
Chrome fork tips and some evidence of chrome under the crown where paint is chipped.
0 2025/07/15 11:57:00
0 2025/07/10 15:30:34
Nuovo Gran Sport. The fella that gave it to me thought it might be some special model, but he is still a younger mechanic. Anyway it should work for a BF member working on a period correct build.
Nuovo Gran Sport. The fella that gave it to me thought it might be some special model, but he is still a younger mechanic. Anyway it should work for a BF member working on a period correct build.
0 2025/07/07 17:01:12
Taking up space in one of the toolboxes.
Taking up space in one of the toolboxes.
0 2025/07/06 14:04:57
The other race surface. Some minor signs of use but is more like a nine on the good looks scale.
The other race surface. Some minor signs of use but is more like a nine on the good looks scale.
0 2025/07/04 12:51:17
One picture of each race after a quick clean up. The races are mirror finish and should work in your cups OK. Just be sure you use high grade ball bearings for your rebuild.
One picture of each race after a quick clean up. The races are mirror finish and should work in your cups OK. Just be sure you use high grade ball bearings for your rebuild.
0 2025/07/04 12:51:13
All of the 70-SS-120's measure at this length. So unless you are working with a pre-CPSC bottom bracket it should fit nicely.
All of the 70-SS-120's measure at this length. So unless you are working with a pre-CPSC bottom bracket it should fit nicely.
0 2025/07/04 12:51:05
These other two are also 70-120 and will work for your bike.
These other two are also 70-120 and will work for your bike.
0 2025/07/03 23:01:30
These two are both 70-120 and what will fit your BB
These two are both 70-120 and what will fit your BB
0 2025/07/03 23:01:27
Silca Schradero pump head. I have a couple of Presta adaptors that should clip into this head giving me both versions for my floor pump.
Silca Schradero pump head. I have a couple of Presta adaptors that should clip into this head giving me both versions for my floor pump.
0 2025/06/27 15:32:20
Ten minutes on the hub polisher, and this will be a no label front hub. Stencil DA on it and it will be a perfect match. Har!
Ten minutes on the hub polisher, and this will be a no label front hub. Stencil DA on it and it will be a perfect match. Har!
0 2025/06/27 11:04:24
Fenders on, and chain installed. Getting close to being a BSO.
Fenders on, and chain installed. Getting close to being a BSO.
0 2025/06/26 14:40:13
barrel adjusters for brake levers
barrel adjusters for brake levers
0 2025/06/26 13:58:32
Detail is a bit fuzzy, but the Mafac with rim guides will work on the front quite well.
Detail is a bit fuzzy, but the Mafac with rim guides will work on the front quite well.
0 2025/06/22 11:19:26
The crank from the Moto-butter-pecan with the outer ring removed installed and ready for pedals. Note the seriously mismatched rims, another nod to the junk box origins.
The crank from the Moto-butter-pecan with the outer ring removed installed and ready for pedals. Note the seriously mismatched rims, another nod to the junk box origins.
0 2025/06/22 11:19:24
Rear wheel in place with Mafac caliper and fender tryout. I think they will work.
Rear wheel in place with Mafac caliper and fender tryout. I think they will work.
0 2025/06/22 11:19:20
Front wheel in place and the Mafac brake caliper installed. Test flight of fenders seems to fit ok.
Front wheel in place and the Mafac brake caliper installed. Test flight of fenders seems to fit ok.
0 2025/06/22 11:19:18
Pulled out of a tubular wheel, probably could use a good clean up and grease.
Pulled out of a tubular wheel, probably could use a good clean up and grease.
0 2025/06/18 11:52:40
These things are useable. Stem, HS, brakes (a bent post on the rear but otherwise ok), F&R derailleurs and the adjuster bits for cables.
These things are useable. Stem, HS, brakes (a bent post on the rear but otherwise ok), F&R derailleurs and the adjuster bits for cables.
0 2025/06/12 14:23:01
The bars will need a lot of straightening work and maybe some tube clamps to make then round again.
The bars will need a lot of straightening work and maybe some tube clamps to make then round again.
0 2025/06/10 13:39:08
The seat tube looks to adjustable to any size by the amount of filler and duct tape holding the parts together.
The seat tube looks to adjustable to any size by the amount of filler and duct tape holding the parts together.
0 2025/06/10 13:39:05
I'm pretty sure the chain rings can be straightened. And the Ultegra RD looks to be just fine. The through bore BB should be a fub thing to take apart.
I'm pretty sure the chain rings can be straightened. And the Ultegra RD looks to be just fine. The through bore BB should be a fub thing to take apart.
0 2025/06/10 13:38:56
It seems to be a kit bike that needs a bit of assembly. Maybe some duct tape and Elmer's glue to hold the bits together?
It seems to be a kit bike that needs a bit of assembly. Maybe some duct tape and Elmer's glue to hold the bits together?
0 2025/06/10 13:38:53
Tyre time ! Pasela 27 X 1 should make drastic improvements in handling opposed to the old steel wheels with wider tires. It should be a fun ride on the local MUP.
Tyre time ! Pasela 27 X 1 should make drastic improvements in handling opposed to the old steel wheels with wider tires. It should be a fun ride on the local MUP.
0 2025/06/08 17:00:51
Rear wheel finished and a cheap rim strip installed. The var stand comes through again with flying colors.
Rear wheel finished and a cheap rim strip installed. The var stand comes through again with flying colors.
0 2025/06/08 17:00:48
0 2025/06/08 11:38:38
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.