Post Your Rigs
#3076
Originally Posted by Siu Blue Wind
Ooooh! Wanna play Konas? 


#3078
Originally Posted by Siu Blue Wind
Two puple, one red and one dark (black?) one in the corner? I can't tell........
Two purple ones are both kona keikis.
The green one with the batman sticker is an old ('90) kona explosif.
And all the way in the corner, with the 'stars and bars' paint job, is a kona a'ha.
#3079
Show Me What'cha got
Joined: May 2005
Posts: 1,225
Likes: 0
From: O'Fallon, Misery
Bikes: old school Giant Attraction MTB (where it all started),old school Schwinn High Plains MTB (XC and long ride duty), Mosh DJ3 (BMX basher), and Trek Bruiser 1 (freeride and full of mods and still growing)
My bike as of today with new brakes installed (Grimeca System 8), new rear derailleur (SRAM X.9), new shifters (SRAM X.9), and new cassette SRAM PG970. It's amazing how much of a difference the new drive train makes but I was riding Shimano Acera so it's leaps and bounds greater.
Fresh out of the shop, pre-ride.






Fresh out of the shop, pre-ride.






Last edited by Blazinall91; 04-27-06 at 06:51 PM.
#3080
Banned.
Joined: Nov 2004
Posts: 2,123
Likes: 0
From: Moncton NB
Bikes: Trek Jack...trials bike soon.
Those calipers are SO NICE!
#3081
Banned.
Joined: Nov 2004
Posts: 2,123
Likes: 0
From: Moncton NB
Bikes: Trek Jack...trials bike soon.
When are you getting a new fork?
#3082
Show Me What'cha got
Joined: May 2005
Posts: 1,225
Likes: 0
From: O'Fallon, Misery
Bikes: old school Giant Attraction MTB (where it all started),old school Schwinn High Plains MTB (XC and long ride duty), Mosh DJ3 (BMX basher), and Trek Bruiser 1 (freeride and full of mods and still growing)
i'll get a new fork in ideally June, but most likely somewhere in the neighborhood of mid-july, i'll just have to see how it all works out, cause I'm almostpossitive I'll be getting a promotion at work, but it's one of those things where it could NOT happen, but i don't see that
I really like ym calipers too and they work great
I really like ym calipers too and they work great
#3083
#3084
Just Ride
Joined: Sep 2004
Posts: 1,343
Likes: 0
From: Melbourne - Australia
Bikes: 2005 Giant Yukon with the works.
Nice Blazinall! What fork do you have on at the moment? Also what are you thinking of getting for your next fork?
#3086
Show Me What'cha got
Joined: May 2005
Posts: 1,225
Likes: 0
From: O'Fallon, Misery
Bikes: old school Giant Attraction MTB (where it all started),old school Schwinn High Plains MTB (XC and long ride duty), Mosh DJ3 (BMX basher), and Trek Bruiser 1 (freeride and full of mods and still growing)
SS-ben --- the fork i have now is the Spinner that came on it (130mm), I'm looking at a Fox Vanilla RLC, Fox 36 Vanilla, or Rock Shox Pike 454
#3088
Junior Member
Joined: May 2006
Posts: 14
Likes: 0
Im picking up a Kona Coiler tonight, then hopefully a Rocky mountain Flow on friday. ill make sure i take pics later
#3090
Banned.
Joined: Nov 2004
Posts: 2,123
Likes: 0
From: Moncton NB
Bikes: Trek Jack...trials bike soon.
Ugh, the spinner has 120 mm of travel.
#3092
Senior Member
Joined: Jan 2006
Posts: 680
Likes: 0
And to "echo" Flak here is my bike too heh which is also a Rockhopper Comp Disc and its brand new too, though its black 







#3093
Show Me What'cha got
Joined: May 2005
Posts: 1,225
Likes: 0
From: O'Fallon, Misery
Bikes: old school Giant Attraction MTB (where it all started),old school Schwinn High Plains MTB (XC and long ride duty), Mosh DJ3 (BMX basher), and Trek Bruiser 1 (freeride and full of mods and still growing)
Originally Posted by Jason222
Ugh, the spinner has 120 mm of travel.
mine had little stickers i peeled off of the tops of the stanchions on my fork that stated "130mm"
and to save like 20 more posts, I'm positive it has 130mm, I removed the stickers, trust me...
but then again we all saw how wrong i was about my brakes...
just saving ya'll the hassle
Last edited by Blazinall91; 05-04-06 at 09:25 PM.
#3095
Ultra-clydesdale
Joined: Apr 2006
Posts: 572
Likes: 0
From: Sacramento, CA or St Paul, MN
Bikes: Titus Racer-X AL/Trek 520(RIP)/Trek 930
Old pic: Now has Time ATACs instead of clips and straps.

Pretty much how I had it built up in 2001
Titus Racer-X AL (large) with Fox Float RC
Full XT kit (Cranks are 2004 though) -- I don't like discs
Marz Z2 race (Oil Bath FTW)
Mavic x517/XT with 36 DT spokes
Syncros seat post, easton bar, generic specialized stem
Its just about perfect and only replace parts as they brake.
I used my employee discount on this, saved me a bundle.
My dad has an older one of these. Racer-X's are built like tanks. His is now nearly 10 years old and he bought it used after it was rented by an outfit in Moab for 2 years. Parts were dead, but the frame (and the rear shock) solder on as well as they did th day it was made.

Pretty much how I had it built up in 2001
Titus Racer-X AL (large) with Fox Float RC
Full XT kit (Cranks are 2004 though) -- I don't like discs
Marz Z2 race (Oil Bath FTW)
Mavic x517/XT with 36 DT spokes
Syncros seat post, easton bar, generic specialized stem
Its just about perfect and only replace parts as they brake.
I used my employee discount on this, saved me a bundle.
My dad has an older one of these. Racer-X's are built like tanks. His is now nearly 10 years old and he bought it used after it was rented by an outfit in Moab for 2 years. Parts were dead, but the frame (and the rear shock) solder on as well as they did th day it was made.
#3096
Banned.
Joined: Nov 2004
Posts: 2,123
Likes: 0
From: Moncton NB
Bikes: Trek Jack...trials bike soon.
Originally Posted by Blazinall91
mine had little stickers i peeled off of the tops of the stanchions on my fork that stated "130mm"
and to save like 20 more posts, I'm positive it has 130mm, I removed the stickers, trust me...
but then again we all saw how wrong i was about my brakes...
just saving ya'll the hassle
and to save like 20 more posts, I'm positive it has 130mm, I removed the stickers, trust me...
but then again we all saw how wrong i was about my brakes...
just saving ya'll the hassle
https://www.spinner-usa.com/sf_allmountain_edge.html
https://www.mtbr.com/reviews/Freeride...t_124748.shtml
https://wheel2wheel4bikes.com/product...id=m1b1s1p1455
#3098
paging revmonkey
Here's my bike chillin' in Pisgah
Last edited by cryptid01; 05-08-06 at 05:39 PM.
#3099
#3100
Shreddin' heaven on his 20"
Joined: May 2005
Posts: 1,151
Likes: 1
From: markham, ontario, canada aka chinatown north
Originally Posted by gastro
Here's my bike chillin' in Pisgah


wait for it
AH SKEET SKEET SKEET SKEET SKEET!











