![]() |
Originally Posted by ~Stuart~
(Post 7404557)
[rant]
wow... apparently i got a phone call from dukes saying that the reason my bike creaks is because the fork is to light weight for what i do on it (This call happened back when i was on my camping trip, only got my message today). Ok. Seriously? WTF? I made the bike creak in the store, before I dropped it off, and after I picked it up. Dukes -1. [/rant] |
Originally Posted by pyze-guy
(Post 7405744)
Speaking of creaking my wifes bike creaks when peddled. Tighened the bb, cranks arms, crainring bolts and pedels, but still creaks. Not the seatpost, stem or bars.
Ideas? turned out to be a bit of rust on the BB where it contacts the shell |
Originally Posted by pyze-guy
(Post 7405744)
Speaking of creaking my wifes bike creaks when peddled. Tighened the bb, cranks arms, crainring bolts and pedels, but still creaks. Not the seatpost, stem or bars.
Ideas? |
I can't get my saddle to stop creaking on my CX bike. I took the seatpost clamp apart last week, cleaned/greased everything. When I first started riding it was gone, but within a half an hour it was creaking again. Blargh.
|
Originally Posted by krusty
(Post 7405920)
Could it be the seatpost rails creaking in the seat shell? I have seen that happen more than once. Grab the seat and start pushing/pulling it in different directions.
|
F**k Duke's ... sorry but I despise that place.
|
Originally Posted by pyze-guy
(Post 7406298)
Its creaks when I am out of the saddle. I think I will pull the bb and regrease the threads.
|
yeah if it creaks when you're out of the saddle i'd say take a look at the bb. handlebars are also notorious for that when they're of the sleeved (ie not the bulged) clamp-are variety.
|
Sqaure taper, and I put new bars on the bike, still creaks even after removing the b/b, cleaning and greasing all the threads and the 'tapers' as well. I regreased the stem last wekk so it shouldn't be that. Maybe a different b/b is in order.
|
...or the frame is slightly cracked?
|
Are the cranks' tapers still perfectly square? Off and on many times and they can "round" .
Greased the pedal threads as well? |
Your wifes bike is obviously pooched. Give me $50 and I'll tow it away.
|
picked up a nice nishiki road bike that i need tuned up.. anyone specific i should ask for at urbane?
|
woohooo 50kph winds, watch yourselves. Tailwinds anyone?
|
Originally Posted by TRaffic Jammer
(Post 7409022)
woohooo 50kph winds, watch yourselves. Tailwinds anyone?
|
Originally Posted by duppy.conqueror
(Post 7389873)
I bought it in 1995 from the Gardin shop in Mississauga; it was brand spanky new, hanging on the wall, never ridden. It is a 1980 year vintage. I rode it on the street, the HPR and the Wind-del velodrome for a few seasons. You are right, it's tight, smooth, fast, and yes be very careful..... you won't lose control but it will give you a rush and a WTF just happened feeling. It should do well at Forest City - ask some of the guys that rode it there. Good luck and good riding man, and keep that rubber side down and level! |
Originally Posted by tuz
(Post 7407574)
...or the frame is slightly cracked?
|
Originally Posted by clipin
(Post 7410040)
OK Duppy - I've been Holding back on the Gardin but here's its history for your records. You are only the second owner/rider of this bike ever (Keith bought it from me just before the shop closed, but he's too big to ride it, right KM?)
I bought it in 1995 from the Gardin shop in Mississauga; it was brand spanky new, hanging on the wall, never ridden. It is a 1980 year vintage. I rode it on the street, the HPR and the Wind-del velodrome for a few seasons. You are right, it's tight, smooth, fast, and yes be very careful..... you won't lose control but it will give you a rush and a WTF just happened feeling. It should do well at Forest City - ask some of the guys that rode it there. Good luck and good riding man, and keep that rubber side down and level! one! |
Originally Posted by clipin
(Post 7410040)
OK Duppy - I've been Holding back on the Gardin but here's its history for your records. You are only the second owner/rider of this bike ever (Keith bought it from me just before the shop closed, but he's too big to ride it, right KM?)
I bought it in 1995 from the Gardin shop in Mississauga; it was brand spanky new, hanging on the wall, never ridden. It is a 1980 year vintage. I rode it on the street, the HPR and the Wind-del velodrome for a few seasons. You are right, it's tight, smooth, fast, and yes be very careful..... you won't lose control but it will give you a rush and a WTF just happened feeling. It should do well at Forest City - ask some of the guys that rode it there. Good luck and good riding man, and keep that rubber side down and level! Sham, I don't know if I commented on this bike before or not but god damnit, it's a really beautiful build. We should all be so lucky to have friends like Keith. While I'm at it,Krusty, the Nagasawa is beautiful - I think I've seen 3 of your bikes and each one of them is really nice. I don't normally like oversized tubing all that much but I think the Wilier is pretty incredible - I'm at least a little jealous. |
Originally Posted by TRaffic Jammer
(Post 7409022)
woohooo 50kph winds, watch yourselves. Tailwinds anyone?
Been going to a few Jays games this past week, another one today and then my last tomorrow. Bit of fun even for someone like me not really into the game. Heard the rain coming down all last night, fenders-up or not will be a gamble today - I'm going to not bother and hope :) |
I don't understand why you take your fenders off when it's not raining. If you liked creating extra work for yourself, then why not just take the extra .0001% wind drag and run them all the time?
|
I see your point, though it's ~10 mins to deal with. I prefer riding with them off, there's only really a few tiny reasons though - I prefer how it looks (shallow and not really a good reason I admit), I prefer being able to flip the bike up on it's back wheel for elevators/GO train mobility, which I can't do with the back fender on, and I get occasional toe overlap/leg scratching going on with the front fender adjusters that's a pain sometimes. The leg scratching usually happens when I'm walking along the bike somewhere and that frankly hurts a ****load - I could cut them shorter, but I'm also remarkably lazy - if that makes any sense ;) Overlap only occurs when I'm forward on the pedals not being clipped in - like when trying to ride backwards or something. Changing a flat is easily done with fenders on or off, that's no problem.
Once the weather starts not being nice as the norm, they'll likely stay on until the Spring. |
for me riding without fenders makes me feel kind of naked and vulnerable but i see your point re: the elevator issue. i don't know though, i couldn't imagine having to remove them all the time. it sounds like you need another bike! one with, one without...
|
Originally Posted by MattRennick
(Post 7411667)
Pretty cool little history of the bike - it's always nice to see/hear about where all these older bikes got their starts.
Sham, I don't know if I commented on this bike before or not but god damnit, it's a really beautiful build. We should all be so lucky to have friends like Keith. While I'm at it,Krusty, the Nagasawa is beautiful - I think I've seen 3 of your bikes and each one of them is really nice. I don't normally like oversized tubing all that much but I think the Wilier is pretty incredible - I'm at least a little jealous. |
Originally Posted by jeremywhitehorn
(Post 7413515)
it sounds like you need another bike! one with, one without...
|
| All times are GMT -6. The time now is 10:57 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.