![]() |
Originally Posted by rockmuncher
So you'll be up for climbo's "Hour of Pain" ride on Sunday then, with added jetlag :D
Bike for sale! |
Originally Posted by Expatriate
Is that for you or her?
|
Originally Posted by 531Aussie
Does this mean the new edition is at the shop?:http://www.ridemedia.com.au/
Got mine in the letter box on Wednesday. "Biggest issue ever" |
Originally Posted by pshaw
Hour of pain nuthin. My mate took me out in horizontal rain round loch lomond on Sunday for 5 hours. I reckon ~30miles uphill!
Bike for sale! |
Originally Posted by berny
She doesn't ride :p
|
Originally Posted by Expatriate
I got my missus a sweet mum's day gift. Are you boys doing right by yours?
|
And for all of you 180mm crank arm afficionado's, here's an excerpt from this week's RBR newsletter:
One rule of thumb says this about matching crank length to leg length: ---Inseam to 31 inches, use 170-mm crankarms ---Inseam 31 or 32 inches, use 172.5-mm crankarms ---Inseam 33 inches more, use 175-mm crankarms You'll also hear recommendations to use longer cranks to increase power. Does that work? We're sharing Dr. Baker's answer from Bike Fit in this week's eBook excerpt. CRANKARM LENGTH There has been much debate, considerable empiric evidence, and little convincing scientific study to support the above length recommendations. Track riders generally choose crankarms up to 5 mm shorter and mountain bikers up to 5 mm longer than the above recommendations. Shorter crankarms allow for faster cadences and improve cornering clearance on velodromes and in criteriums. Although longer crankarms have been favored for hard steady efforts such as time trialing, hill climbing and mountain biking, studies have shown that they change torque, not power -- they require the rider to pedal a larger circle. In time trialing in an aerodynamic position, longer crankarms mean that the rider closes the hip angle, reducing power. (Tip! The length of most crankarms is stamped on the back.) I've got the Arnie Baker "Bike Fit" e-book and it's a bloody good read. Covers all elements of bike fit (not just simple sizing formulas). Get it from RBR. |
Originally Posted by climbo
And what's the Tour coverage, live? the last 3 hours of each stage or what? I thought we'd get the whole thing.
It loks like the feed will be coming from OLN. They only pick up the stages after everything has settled down, even the TT's :( [edit] But you still get to play Phil and Paul Bingo!! :D |
Thanks for the info, Munchie. I've got 180mm cranks on the BMX, and have no problems for the 15 seconds I turn them out of each 45 second race. By the way, I owe you $2. Or I'll give you another patch kit next time I see you.
|
Originally Posted by Expatriate
By the way, I owe you $2. Or I'll give you another patch kit next time I see you.
|
what's RBR ?
|
Originally Posted by climbo
what's RBR ?
A duathlon? Run-Bike-Run?? Jonno Hall was fairly good at these. |
Originally Posted by ed073
A duathlon? Run-Bike-Run??
Jonno Hall was fairly good at these. RBR = www.roadbikerider.com |
pooor old quiz thread is in more trouble than The X-Factor..... |
Originally Posted by ed073
pooor old quiz thread is in more trouble than The X-Factor.....
Bloody google kept winning. And some bloke with behind the scenes knowledge from yesteryear. |
back to reality..... 531 mentioned a while ago that he wanted to use the same length / type crank arms hence buying a new Dura - ace crank set. a little off topic, but is there a school of thought that says you should run similar / same crank lengths on mountain bikes as you do on your training roadie? or is it that the differn't terrain types and style of riding facilitate needing different crank lengths?
|
I would say longer off road. More leverage required and less spinning.
General rule of thumb is higher the cadence, shorter the crank. |
Originally Posted by rockmuncher
It loks like the feed will be coming from OLN. They only pick up the stages after everything has settled down, even the TT's :(
[edit] But you still get to play Phil and Paul Bingo!! :D |
Originally Posted by HDTVKSS
back to reality..... 531 mentioned a while ago that he wanted to use the same length / type crank arms hence buying a new Dura - ace crank set. a little off topic, but is there a school of thought that says you should run similar / same crank lengths on mountain bikes as you do on your training roadie? or is it that the differn't terrain types and style of riding facilitate needing different crank lengths?
Plenty of SS MTB'ers seem to like the 180 MTB cranks but they cannot spin fast RPM's up a hill, it's all about leverage there. |
Originally Posted by climbo
which means they cut out the ads? I hope so.
|
Nothing funnier than Andrew Orsatti or Tomalaris commentating cycling.
Except maybe Tim Webster. |
There's nothing funny (or indeed useful) about SBS cycling commentary at 2:00am :(
|
I've noticed even Phil has mistaken Quick Step for Discovery from helicopter shots this year. The old peepers aren't what they used to be....
|
Don't tell me he's falling for the LA hype as well :D
|
bikeforums.com will be a ghost town this time next year...
|
| All times are GMT -6. The time now is 07:02 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.