Addiction 2024.2
#1426
VFL For Life
Join Date: Feb 2005
Location: Knoxville, TN
Posts: 51,564
Bikes: Velo Volmobile
Mentioned: 781 Post(s)
Tagged: 2 Thread(s)
Quoted: 28919 Post(s)
Liked 1,924 Times
in
1,357 Posts
#1427
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,535
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8430 Post(s)
Liked 9,359 Times
in
4,596 Posts
Is this what you're asking about?
#1428
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,535
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8430 Post(s)
Liked 9,359 Times
in
4,596 Posts
I've been at zero spacers for a couple of years. Keeping the smokestack for now, for who knows what tomorrow may bring?
Some may say that you need to cut the steerer tube down to move the expander plug to where the stem clamps the tube, but I'm not convinced that's an issue with a properly torqued stem.
Some may say that you need to cut the steerer tube down to move the expander plug to where the stem clamps the tube, but I'm not convinced that's an issue with a properly torqued stem.
#1429
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,362
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10632 Post(s)
Liked 12,255 Times
in
6,283 Posts
So, since the wheels I'm rebuilding are 28 years old, and even though they spin smooth as butter on a hot day, I figured I'd kill some time while isolating at home by rebuilding them. I have some top quality bearings from Wheels Mfg., I have Phil's Grease, I have cone wrenches. So I carefully cover my bench with newspaper, take out the QR, and check what wrenches fit the cone and locknut. 14mm fits the cone. 13mm fits the locknut.
Only one problem. This is what I have for 13 and 14mm cone wrenches:
Oh, for the love of Mike!
EDIT: It's like having a dustpan on the other end of a broom!
Only one problem. This is what I have for 13 and 14mm cone wrenches:
Oh, for the love of Mike!
EDIT: It's like having a dustpan on the other end of a broom!
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#1430
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,493
Bikes: 79 Trek 930 is back on the road, 80 Trek 414, 84 Schwinn Letour Luxe,87 Schwinn Prelude, 92 Schwinn Paramount PDG 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3308 Post(s)
Liked 1,916 Times
in
1,210 Posts
Originally Posted by genejockey;[url=tel:23221877
23221877[/url]]I think Quito training would probably be more effective, what with it being at 9250 feet.
#1431
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,493
Bikes: 79 Trek 930 is back on the road, 80 Trek 414, 84 Schwinn Letour Luxe,87 Schwinn Prelude, 92 Schwinn Paramount PDG 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3308 Post(s)
Liked 1,916 Times
in
1,210 Posts
Originally Posted by big john;[url=tel:23221970
23221970[/url]]If you're asking about a modern threadless stem there is no part of the stem inside the steer tube. A quill stem goes inside the steer tube. A threadless stem clamps around the steer tube and can be positioned up or down the steer tube depending on how much steer tube remains. If the steer tube is cut off with the stem at the lowest position, then that's it. No adjustment left.
Is this what you're asking about?
Is this what you're asking about?
#1432
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,245
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8961 Post(s)
Liked 3,134 Times
in
1,798 Posts
Roscoe's heart condition has not worsened so the vet thinks he might be having kidney failure. He took some blood tests and we'll know more tomorrow. He seems fine today even though he was displaced today with his appointment and 4 house showings. One of them has already said they want to come back.
...and the awesome shovel continues to be awesome. Stored in an undisclosed secure location in the Northwest Metro Atlanta area.
...and the awesome shovel continues to be awesome. Stored in an undisclosed secure location in the Northwest Metro Atlanta area.
#1433
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,245
Bikes: 1
Mentioned: 146 Post(s)
Tagged: 2 Thread(s)
Quoted: 8961 Post(s)
Liked 3,134 Times
in
1,798 Posts
#1434
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,464
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 247 Post(s)
Tagged: 1 Thread(s)
Quoted: 11479 Post(s)
Liked 4,883 Times
in
2,825 Posts
#1435
Senior Member
Join Date: Jan 2010
Posts: 39,634
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18583 Post(s)
Liked 16,057 Times
in
7,536 Posts
#1436
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,237
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 561 Post(s)
Tagged: 2 Thread(s)
Quoted: 22743 Post(s)
Liked 9,124 Times
in
4,238 Posts
I would start by trying to find out why it's idling so fast. Might have a vacuum leak. Normally problems with the way the things run isn't going to affect deceleration but if the idle is surging you might feel that.
If by shuddering you mean like a mechanical vibration that sounds like a transmission or final drive issue. Maybe even a motor mount. Even a timing chain. Check for a vacuum leak first to try and get the idle squared away.
If by shuddering you mean like a mechanical vibration that sounds like a transmission or final drive issue. Maybe even a motor mount. Even a timing chain. Check for a vacuum leak first to try and get the idle squared away.
I learned that the Saturn Forums has shut down. Sigh.
#1437
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,182
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12985 Post(s)
Liked 7,902 Times
in
4,201 Posts
The pinball palace is closed til 7 today because some Canadian country star is playing there tonight. Must have a hell of a stage to set up if they're canceling happy hour to accommodate load-in.
#1438
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 14,393
Bikes: road, track, mtb
Mentioned: 142 Post(s)
Tagged: 0 Thread(s)
Quoted: 2797 Post(s)
Liked 3,385 Times
in
1,774 Posts
listened to a bunch of Dead today while working. My guitar player's influence is holding strong.
whoa, man
whoa, man
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
Likes For TMonk:
#1439
shaken, not stirred.
Join Date: Aug 2006
Location: The Shaky Isles.
Posts: 5,260
Bikes: I've lost count.
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quoted: 1422 Post(s)
Liked 986 Times
in
397 Posts
Edit: well beaten by LAJ
__________________
Get a bicycle. You will not regret it if you live. ~Mark Twain, "Taming the Bicycle"
vBulletin: snafu
Last edited by gnome; 04-23-24 at 07:24 PM. Reason: beaten by faster rider.
#1440
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,182
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12985 Post(s)
Liked 7,902 Times
in
4,201 Posts
#1441
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,182
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12985 Post(s)
Liked 7,902 Times
in
4,201 Posts
Welp, the sun has stopped shining on the patio at my second favourite happy hour spot, now I'm freezing my ass off. Time to briskly walk home.
#1442
VFL For Life
Join Date: Feb 2005
Location: Knoxville, TN
Posts: 51,564
Bikes: Velo Volmobile
Mentioned: 781 Post(s)
Tagged: 2 Thread(s)
Quoted: 28919 Post(s)
Liked 1,924 Times
in
1,357 Posts
#1443
Mostly Harmless
Join Date: Jul 2008
Location: At Large
Posts: 56,729
Bikes: Have two wheels
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
Quoted: 13788 Post(s)
Liked 4,633 Times
in
2,544 Posts
So, since the wheels I'm rebuilding are 28 years old, and even though they spin smooth as butter on a hot day, I figured I'd kill some time while isolating at home by rebuilding them. I have some top quality bearings from Wheels Mfg., I have Phil's Grease, I have cone wrenches. So I carefully cover my bench with newspaper, take out the QR, and check what wrenches fit the cone and locknut. 14mm fits the cone. 13mm fits the locknut.
Only one problem. This is what I have for 13 and 14mm cone wrenches:
Oh, for the love of Mike!
EDIT: It's like having a dustpan on the other end of a broom!
Only one problem. This is what I have for 13 and 14mm cone wrenches:
Oh, for the love of Mike!
EDIT: It's like having a dustpan on the other end of a broom!
#1444
Mostly Harmless
Join Date: Jul 2008
Location: At Large
Posts: 56,729
Bikes: Have two wheels
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
Quoted: 13788 Post(s)
Liked 4,633 Times
in
2,544 Posts
Likes For rjones28:
#1445
Mostly Harmless
Join Date: Jul 2008
Location: At Large
Posts: 56,729
Bikes: Have two wheels
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
Quoted: 13788 Post(s)
Liked 4,633 Times
in
2,544 Posts
#1446
VFL For Life
Join Date: Feb 2005
Location: Knoxville, TN
Posts: 51,564
Bikes: Velo Volmobile
Mentioned: 781 Post(s)
Tagged: 2 Thread(s)
Quoted: 28919 Post(s)
Liked 1,924 Times
in
1,357 Posts
#1447
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,182
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12985 Post(s)
Liked 7,902 Times
in
4,201 Posts
#1448
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,535
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8430 Post(s)
Liked 9,359 Times
in
4,596 Posts
Likes For big john:
#1449
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,182
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12985 Post(s)
Liked 7,902 Times
in
4,201 Posts
Addendum: I ordered a 13/14 mm just like the above from Amazon, to arrive tomorrow. I thought maybe I'd buy a 13/15, but I couldn't gt that tomorrow. So I went with the 13/14. Then I checked the rear wheel, and the cone and locknut there are BOTH 14mm. So I guess it's good I got the13/14.
#1450
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,182
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12985 Post(s)
Liked 7,902 Times
in
4,201 Posts
They had a new girl holding down the fort at the fish and chips joint today. She went just a little hard on the cod and a fair bit soft on the chips.
One of these days I'm gonna man up and order the battered sausage and chips with gravy and mushy peas on the side.
One of these days I'm gonna man up and order the battered sausage and chips with gravy and mushy peas on the side.