![]() |
$155 :)
|
nice hubs if you ask me. i have used quite pricey cxrays with mine.
|
Good to know. I've been interested in them for awhile now... almost bought a set a couple months ago for a future build. Those were the spokes I was considering as well.
|
Originally Posted by yummygooey
(Post 13901396)
$155 :)
|
Dolan Pre Cursa on sale or a wheel build?
|
|
I like the gold, keep it gold.
|
Stay gold, Jaytronboy.
|
Should I drill out the Kagero fork to accept a brake, buy a new fork that's already drilled, or should I just htfu and run brakeless?
http://cache1.bigcartel.com/product_...agero-6-wm.jpg |
cost of each option?
|
drill it
|
1. Drill it - Likely cheap from my LBS. He already offered, said they could do it, no big deal.
2. New fork - I haven't found a replacement fork that I'd like yet, but I wouldn't spend more than $200 on one. 3. Run brakeless - Could be free and everything could be fine. Could kill/maim myself or my bike from my stupidity or someone else's. |
Drill it son.
If it's a frame you really like and you want to run a brake, go for it. Better to be safe than sorry, or risk yourself/bike. Resale value wont be damaged much, and once again, if its a frame you want to keep fro a while you shouldn't be worrying about it. New fork would be pricey, might not fit geo, not look that good, etc. |
Originally Posted by yummygooey
(Post 13901250)
i've been thinking about a circus monkey hub.
Might feel dumb lacing such an expensive rim to such a cheap hub doe. |
Originally Posted by ddeadserious
(Post 13902912)
Should I drill out the Kagero fork to accept a brake, buy a new fork that's already drilled, or should I just htfu and run brakeless?
http://cache1.bigcartel.com/product_...agero-6-wm.jpg |
Originally Posted by ddeadserious
(Post 13902912)
Should I drill out the Kagero fork to accept a brake, buy a new fork that's already drilled, or should I just htfu and run brakeless?
|
I noticed that, but how on earth do you get the threaded post out?
|
If you drill the crown just a little bit on both sides, you should be able to pull it right out using needlenose pliers.
|
Ahh good to know. Thanks!
|
No prob. Just be careful and drill right where the center of the plug is.
|
Should I get a black one or white one?
http://www.bikyle.com/images/Helmets...helmet_blk.jpghttp://www.bikyle.com/images/Helmets...helmet_wht.jpg |
black, it absorbs the sunlight, much more aero than the white with all the sunlight bouncing off and creating drag
|
Should I get a Randonneur or an Everwear for daily commuting and skidding?
|
Originally Posted by nite train
(Post 13917076)
black, it absorbs the sunlight, much more aero than the white with all the sunlight bouncing off and creating drag
|
Originally Posted by TheRealFaux
(Post 13917072)
Should I get a black one or white one?
|
Originally Posted by Son Of Ra
(Post 13918898)
Should I get a Randonneur or an Everwear for daily commuting and skidding?
|
Agreed. Everwears may be a little sluggish but nowhere near as boggy as a Rando.
|
Yeah I was leaning toward the Everwear anyway.. Thanks guys.
|
white helmet by far.
i actually really like how my rando 32 wire beads roll. maybe i got a good pair. |
Well I decided not to get either the black or white prolight. I got a white ionos instead :D
|
| All times are GMT -6. The time now is 10:43 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.