I love cocksauce. I use it daily along with other Asian condiments.

Dave, can the RL726 lever fit on the middle section of my Nitto Noodles? If not, would the 31.8 (shim if needed) lever do the trick?

those would complete my life

+1 I missed out on them too. =/

They are not going to be made ever again; the guys @ huyfong actually lawyered up on them.

We must get them to sponsor a cycling team. life supply of sarrachi!!!!!

it figures.....I wish Huy Fong would put them out I honestly would have no problem paying whatever they want me to for a water bottle. As it is I often use an empty hotsauce bottle for water

Can someone help me with the spoke lengths on this hub laced to a A23 32h?
Thanx
http://i1137.photobucket.com/albums/...g/Fronghub.png

I got 294.5 for 3x

And also the rear wheels is Novatec track laced to A23, 3x I got 290.1

Me too:

http://bikeforums.net/attachment.php...hmentid=285698

What spokes are you using?

Yea I used that, just wanted to double check

I edited.

I get the same numbers as you. Whether you round up or down will depend on the spokes being used.

Lasers.
Oops I forgot to round when attaching the note to the seller.

Son of a *****!

I'll take care of it.

:cry:
My bad haha.

Scrod, strange noise problems.

The sqrls Kilo TT makes a "bell-like ring," every time she goes over some bumps or rough roads. I can't replicate it by shaking it like I was King Kong (it's kind of fun because she has the 44cm).

Then on my M300, given that I haven't cleaned the drivetrain or lubed it up in the last month, I'm starting to hear squeaks when I start to pedal at a faster pace, and then I hear more of a creaking noise (think old rocking chair) ONLY on the right crank arm. I have a feeling that I should rinse the chain, lube it up, and clean the gears, tighten up the BB since it has been a while. Could be something else, though.

Any idea as to what could fix these noises?

A "bell-like ring". Hmmmm....... Is it a brake cable making contact with the frame?

As for you, clean your chain, lube it and make sure your crank arm bolts and chainring bolts are tight. Also, check your saddle and maybe put a few drops of oil (or even chain lube) where your seatpost clamp makes contact with the rails.

Oh snap, I forgot to mention that my B17 creaks like hell when there is some pretty heavy load on it.

And yes the cable is in constant contact with the frame, since it's SS and has a rear cable. I think it might be touching the headset also.

Can you replicate it by dropping the bike from a few inches off the ground?

Also, I may need to see a video of you shaking the bike like King Kong to make sure you're doing it right.

I'll try to remember that when my new camera comes in lol

I'll see in a bit about dropping the bike off the ground.

Since creaking is already being talked about...

Have you ever heard of a BB creaking and then suddenly stopping? When I put it on, it had pretty much never been ridden (same for the cranks themselves), and it wouldn't stop creaking. Now it doesn't make any noise. Could this be bad?

Hub bearings have a break in period, might be the same for bottom brackets.

Dave, I got a chance to drop the bike from off the ground, and it indeed does replicate the "bell-like ring" noise.

Although at first I thought it was coming from the front, I cannot tell where it's coming from any more. I think it's coming from somewhere from the front-center part of the bike.

Lol, does the bike have a bell on it?

Scrod, what floor pump do you use at the shop? Are you happy with it?

I a new floor pump.

Use your spider senses. You'll get it!

I've got a fancy new-fangled air compressor at the shop but my go-to floor pump is the Topeak Joe Blow Sport. I've had one for about three years with no issues whatsoever.

Well **** me! Just realized I got an early Christmas present from the grand dad. Goddam air compressor.

Was wondering what the hell I could use it for.

For real? Get one of these and you're golden.

That's awesome.

I wonder if I know a guy who can get one, and I wonder what it would run me.

:lol:

If you do, he can probably let you know in the morning.

I hope I do, and if I did, I'd let him know he's the ****.

And then get one of these so you can giggle like an idiot at the fart noises it makes while you put grips on.

http://i.imgur.com/hbLNx.jpg