Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Tool Sets is there much of a difference?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Tool Sets is there much of a difference?

Old 11-10-08, 09:29 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Oct 2008
Location: Meadville PA.
Posts: 61

Bikes: Specialized sirrus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Tool Sets is there much of a difference?

I am just learning bike repair but would like to get a tool set that will stand the test of time and work for me if im just a after the ride wrench or working on bikes for a living. (I like to buy stuff once)

Basically I am looking at Park tools compared to spin doctor. I also want a to get a work stand and truing stand.

The park truing stand seems to be a real step up but I do not see much difference in the other items myself except price.

Thanks for the input in advance, you people are great!
KevinB is offline  
Old 11-10-08, 11:59 PM
  #2  
Senior Member
 
BCRider's Avatar
 
Join Date: Mar 2008
Location: The 'Wack, BC, Canada
Posts: 5,556

Bikes: Norco (2), Miyata, Canondale, Soma, Redline

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 45 Times in 35 Posts
Park for the specialty bicycle stuff. For the general items like metric wrenches and allen keys just go to your local tool stores and ask which lines come with the lifetime warranty. Lifetime's are pretty common these days with almost any decent recognsized inhouse brand. From those pick the cheapest you can that you like the looks of and the way they fit in your hand. If you have a choice pick the ones that have the slimest and smallest ends to fit into tighter spots. There are cheaper sets out there for sure but if you buy even the cheapest that comes with a lifetime warranty you'll be buying something that's a few steps up the food chain.

You'll also want a 3/8 inch ratchet set as well. They come in handy for recessed bolts like pedal crank bolts. Your choice as to the turn wheel or the little toggle lever for changing ratchet direction but I tend to prefer the little toggle lever style even if it does get flipped accidentally now and then by being too easy to use.

ANd when you buy your screwdrivers do NOT buy the ones with the tips done in shiney chrome plating. They skid out of the heads and mess up the screws. Buy bare steel shaft drivers or if you must have shiney chrome at least get the styles that come with the black parkerized ends and chromed shanks. And since Phillips drivers are evil by design be sure you buy good ones. Or even buy a multi driver that uses the snap in driver bits. I've found that when it comes to Phillips drivers the bits the drywallers use are really nicely shaped. And when they wear a bit you toss 'em and put in a new one. Nothing ruins your day more than a worn phillips that just rounded out the + in the end of that one screw holding up the whole project..... don't ask how I know. You don't have enough time for all the stories.
BCRider is offline  
Old 11-11-08, 12:10 AM
  #3  
Great State of Varmint
 
Panthers007's Avatar
 
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 15 Posts
A file, or grinder, works wonders for roughing up the chromed areas on the blades.
Panthers007 is offline  
Old 11-11-08, 07:35 PM
  #4  
Your mom
 
Join Date: Aug 2006
Posts: 2,546
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
You will notice a difference in beefiness between Spin Doctor (which are house-branded VAR tools) and Park tools. Park cone wrenches are thicker stock in the handle, etc. I have the Spin Doctor pro set, which I've used A LOT (rebuilt many old bikes). I like it, and have yet to have any major breakdowns.

Truing stand-wise, it depends how much you're going to use it. I have the Minoura el-cheapo stand. Wish I had the Park TS2; probably will never shell out for it. Minoura works well enough.
tellyho is offline  
Old 11-11-08, 10:05 PM
  #5  
Newbie
 
Join Date: Nov 2008
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I started fixing bikes about 2 months ago. This is my first time on this forum in fact but if I could, I would take back that cheap Spin Doctor starter tool kit and buy Park tools only. Even though I'd have less tools I feel like I'd be better off. I did get a Park stand and I've been very impressed with it. Again, I have no experience to speak of and I'm sure cheap tools have their place, I just haven't found out where yet.
bobbyd is offline  
Old 11-11-08, 11:11 PM
  #6  
Boomer
 
maddmaxx's Avatar
 
Join Date: Nov 2003
Posts: 7,214

Bikes: Diamondback Clarity II frame homebuilt.

Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 16098 Post(s)
Liked 1,457 Times in 1,064 Posts
Good tools fit better, slip less and last longer. They usually have more comfortable handles. I've seen inexpensive cone wrenches that had nicks in the jaws after one stubbron set of cones. Your better off with fewer good tools that will last for decades.
__________________
maddmaxx is offline  
Old 11-11-08, 11:19 PM
  #7  
Great State of Varmint
 
Panthers007's Avatar
 
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 15 Posts
I agree 100%. You wouldn't believe the difference in quality between the Park and Pedros Shimano bottom-bracket tool - Park BBT-22. Lordy! I could tell the Pedros might work once. Then be manged for eternity. And that's just today's story.
Panthers007 is offline  
Old 11-12-08, 12:19 AM
  #8  
Senior Member
 
Join Date: Oct 2008
Posts: 231
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I have a set of spin doctor tools that I've used to completely overhaul two bikes already, and my only complaint about them being the grips suck.
cbfight is offline  
Old 11-12-08, 12:32 AM
  #9  
Great State of Varmint
 
Panthers007's Avatar
 
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 15 Posts
I'll never forget a night, in a crumby apartment, when a friend of mine told me his $5 Swiss Army Knife was as good as my real one. He inserted the cork-screw into the bottle of wine we bought - from his $5 winner. Gave it a twist. And 'SNAP!' - it left the whole cork-screw inside the cork.

I grinned. Neither one of us said a word.
Panthers007 is offline  
Old 11-12-08, 09:09 AM
  #10  
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
Originally Posted by tellyho
You will notice a difference in beefiness between Spin Doctor (which are house-branded VAR tools) and Park tools.
Actually the Spin Doctor tools are often house-branded Lifu (Taiwanese) tools. VAR is a premium European brand and very expensive.
HillRider is offline  
Old 11-12-08, 09:28 AM
  #11  
Senior Member
 
Join Date: Jul 2008
Posts: 830
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'd stay away from sets and buy what you need as you do more work on the bike. That way you can choose the tool that suits you best. For example, there are different types of chain-stretch gauges: go/no-go and those that actually measures the amount of stretch. For various reasons, I prefer the latter. There are different types of hex drives: I use five types (square-drive, T-handles, knuckle jointed, L-shaped, joined folding set).

Over the years I've found Park to have the highest quality, slowest wearing bike specific tools. However, now Park has a cheaper line for the non-pro. I prefer paying extra for the old line. I still buy Craftsman for a lot of non-bike specific tools.

You don't need some tools that often come in a set. You don't head headset tools. I've been doing them for years the old fashioned why I used to do trailer and older automobile wheel bearings/races. The crank-set tools will depend on the specific crank-sets owned. I have to have three types.

On the truing stand, nothing beats the Ultimate. I even use it to mount tires (tube-type mounted tubeless with Stans). You have far better acess to the spokes/rim/hub as the wheel is held on only one side

Al

Last edited by alcanoe; 11-12-08 at 09:38 AM.
alcanoe is offline  
Old 11-12-08, 10:22 AM
  #12  
Senior Member
 
capwater's Avatar
 
Join Date: Dec 2004
Location: Quahog, RI
Posts: 1,509

Bikes: Giant TCR Comps, Cdale R5000, Klein Q-Pro, Litespeed Siena, Piasano 105, Redline Conquest Pro, Voodoo Bizango, Fuji Aloha

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Spin Doctor stuff is fine, put in dozens of BBs with their tools and countless cassette swaps. If you use tools to make a living I'd get the best. Used to work as an auto mechanic and always treid to get my hands on Snap-On stuff. Even Craftsman stuff was considered second tier. But for the home mechanic and part time bike builder most any decent quality stuff will work. Do kick in the cash for a good torque wrench though.
capwater is offline  
Old 11-12-08, 04:48 PM
  #13  
cab horn
 
Join Date: Jun 2004
Location: Toronto
Posts: 28,353

Bikes: 1987 Bianchi Campione

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 25 Times in 18 Posts
Originally Posted by alcanoe
Over the years I've found Park to have the highest quality, slowest wearing bike specific tools. However, now Park has a cheaper line for the non-pro. l
Absolutely not. There are much better tools out there than park. Park would rank as midrange. Hozan, pedros, var. All superior.
operator is offline  
Old 11-12-08, 04:57 PM
  #14  
Great State of Varmint
 
Panthers007's Avatar
 
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 15 Posts
I have both a Pedros bottom-bracket tool for Shimano Octalink and the Park Tool BBT-22. The Park one is much the better tool. I'd expect the ill-fitting Pedros to self-destruct.
Panthers007 is offline  
Old 11-15-08, 08:38 PM
  #15  
Senior Member
 
Snordalisk's Avatar
 
Join Date: Nov 2003
Location: Worcester, MA
Posts: 129

Bikes: 1977 Raleigh Professional, 1997 Milano 3v, 2004 Surly Karate Monkey, 2007 Surly Crosscheck, 1984 Hutch Pro Racer

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
As far as cartridge bottom bracket tools go, the best is Shimano's tool, because of its low profile. On a stubborn cup it's less likely to slip off because you're applying force closer to the BB. If you're going to use a socket handle, the Pedro's tool and the Park BBT-22 work well enough. For years Park sold the BBT-2 which was an absolute piece of garbage, then they copied the Pedro's tool and now it's fine.
Snordalisk is offline  
Old 11-15-08, 10:10 PM
  #16  
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
Originally Posted by Panthers007
I agree 100%. You wouldn't believe the difference in quality between the Park and Pedros Shimano bottom-bracket tool - Park BBT-22. Lordy! I could tell the Pedros might work once. Then be manged for eternity. And that's just today's story.
Heh, heh, heh. If you like the Park Tool version, you'd LOVE using a genuine Shimano bottom bracket tool. It sets much sloser to the bottom brcket so it stays connected to the splines much better and allows you to use more muscle when loosening tight bottom brackets. Then I use the Park equivlent, with my torque wrench, when I reinstall the bottom bracket.

I also greatly prefer Shimano cable cutters to Park.

Last edited by Retro Grouch; 11-16-08 at 05:55 AM.
Retro Grouch is offline  
Old 11-16-08, 01:54 AM
  #17  
Senior Member
 
Join Date: Nov 2006
Location: TORONTO , ONT , CA
Posts: 813

Bikes: '86 AMBROSI / C RECORD. PINARELLO MONTELLO / FRAME, FORK.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Just a thought:

If SNAP-ON made cone wrenches, which one would be the more expensive,

CAMPAGNOLO or SNAP-ON?

(ROTFLMAO)


Regards,
J T

Last edited by J T CUNNINGHAM; 11-16-08 at 04:02 PM.
J T CUNNINGHAM is offline  
Old 11-16-08, 01:50 PM
  #18  
Great State of Varmint
 
Panthers007's Avatar
 
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times in 15 Posts
Originally Posted by Retro Grouch
I also greatly prefer Shimano cable cutters to Park.
Absolutely. The Shimano cable-cutters are, hands down - the best. I bought my gray & blues back in 1982 - still going strong. Nice & clean cuts of the nastiest cable-housing.
Panthers007 is offline  
Old 11-16-08, 11:58 PM
  #19  
100% car free
 
Join Date: Nov 2008
Location: Salt Lake City
Posts: 218

Bikes: 2008 LeMond Tete de Course

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
+1 for building the kit up as you go. My basic rule is to get top quality where it could mess up the bike, and save money where it isn't likely to. I have a SpinDoctor trueing stand, chain whip, and cable puller. The other bike-specific tools are a mix of Park and Pedro's (I'm not happy with my Park cable cutters - will look into the Shimano. I try to get high-quality non-bike-specific tools used from yard sales and such. My rubber hammer is frrom the dollar store and I couldn't love it more. Get a couple options in your hand. If you can feel a difference AND can forsee the difference mattering, then go with the better tool (if it's in your budget, of course).
jdott is offline  
Old 11-17-08, 09:36 AM
  #20  
Senior Member
 
Join Date: Jul 2008
Posts: 830
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I didn't care for the old Park cable cutters, but the new design works very well. However, the best way to cut cable housing is still a Dremmel tool.

Al
alcanoe is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.