ISO

Used, but good condition silver 3T Prima 220 bars, Merckx bends, grooved, 40 c-c
Early 90s vgc campy chorus or record headset, or even just chorus bottom cup and crown race
Early 90s vgc record brake levers BL-62RE CG

I still have a small collection in the parts bin ranging from 1974-1996 for sale, but willing to possibly trade - pm to luukoutbelow@yahoo.com for pics

NOS Eubios bars 41 c-c
Fair condition Eubios bars 40 c-c
1996 Mint (possibly nos?) Cinelli 1A stem, silver 125, in box
VGC 1977? Sugino Mighty Competition 171mm crankset
VGC Early 90s record FD
Late 70s Cinelli Giro DiItalia bars
used 8 sp cassettes
fair-good lower end campy 8 speed group - most of it
1974 *Gorgeous*, very low miles (est 100), high flange PHIL WOOD hubbs on Weinmann wheelset
Kreitler headwind attachment, old version
NOS leather Legnano saddlebag
2 X 1992 record 8sp ergos - vgc-mint
GC early 90s FIR wheelset, black
More chorus or lower used campy stuff, seatposts, brakes, ergos,

Thanks

ISO: 2 x 6400 series left shifters. I have one, but it looks like this:

https://farm5.staticflickr.com/4338/...f048054f_c.jpgSomething's missing by David Cummings, on Flickr

That's what I get for buying stuff off the bay and stashing it until needed. :eyeroll:

Have: Suntour DT ratcheting shifters, 6200 series DT shifters, 1st gen 600 SIS RD, 6200 RD, and more...

Or if somebody knows what to replace the innards with...

just posted a bunch of pics of tradeable stuff in the northeast trade thread
http://www.bikeforums.net/northeast/...l#post19837389

PM sent.

Looks like the RX100 may work.

ISO:
Shimano Dura Ace 7402 front hub cones. Found out one is pitted and they are hard to find.

If you have one or two, pleas use the [MENTION=124730]SJX426[/MENTION] in your response so I know you did. Thanks

Seeking: 50.4mm BCD crankset, like a TA Cyclotouriste or Stronglight 49. Ideally, I'd like to have rings in good shape, but I would be happy with just the arms as well. I need British pedal threading and 170mm arm length.

Have to trade: One of two Stronglight 93 sets in good shape. Both sets have 170mm arms, but one set has French pedal threading, while the other set has British threads. I have several rings, so we can discuss what you want, or just trade the arms. Sorry, no dustcaps. I also have some other stuff to trade, so please PM if you'd like to see pics and discuss.

Want: A decaleur for a 1" steerer
Have: A Velo-Orange decaleur for a 1 1/8" steerer

Or any tips on how to make this decaleur work with a narrower steerer.

https://farm5.staticflickr.com/4356/...87d285fa_c.jpg

Would a couple spacers (guessing about 3mm in height) fit inside that? I'm guessing the top nut would be able to hold the whole thing on firmly once it gets centered and has no wiggle room.

Stem has been received.

Wanted: Short reach quill stem. 50 or 60. Prefer taller than the typical. I have lots of bits. No Campy .

ISO:
Dura Ace Uniglide 13t 1st position and 15t second position cogs for 7 cog cassette.


Top

Like these?
https://www.loosescrews.com/product/...a-ace-7-speed/
https://www.loosescrews.com/product/...ura-ace-78-sp/

The 13t will work, the 15 won't; is a 1st position cog as well.
Thanks for the head's up.


Top

[UPDATE] Stem acquired. :)

Looking for a stem swap? I've got Cinelli 1A in 70 and 100mm... will trade either for a 90. Thanks! :)

Long shot - anyone got a Swiss thread bb?

PM sent.

Yes! At least I think so. I won't get to measure it until Saturday Sept 16. I'm pretty sure I have a 90, and I'd love your 70.

Please email me at the address below.

Up to [MENTION=348967]J.Oxley[/MENTION], I don't want to interfere with Tom's offer. If it works for both of you, then its best that way. The 90 is available in any case, to first J.Oxley, then others. I'm good either way.

Bill

Email sent. Thanks!

Much appreciated, Bill. I have no doubt it'll find a solid home. :)

ISO Campy English Fixed Cup
 

Need a fixed cup for a Nuovo Record BB, the spindle is marked 68-SS-120.

I'm trying to figure out if I need a think or thick wall cup....anyone know for sure?

Dude, where you been?

Need a rear Tektro brake for my 88 Trek. Pic shows the front one I want to match with. Currently has a no name black brake and it is irking me. My winter beater is suddenly needing the right parts!
Recessed please.
Have: quite a lot, let me know

ISO - WTB Blackburn Workhorse
 

My old stanby finally broke tonight after 20 years of faithful service and abuse. :( I have a fancier stand but this one was TOO handy. Want to buy a complete stand or will buy the piece the 2 slanted legs screw into of you have one missing parts or broken elsewhere. I'm going to patch mine but not sure how long that will last.

http://imagizer.imageshack.us/v2/800...923/gxuR16.jpg

Looking for 36h clincher rim like Mavic MA, MA2, Module E, Module 3, Open Pro, or similar. Primarily not colored or anodized so will consider other brands also.

Have mismatched 36h MA40 rims and Wolber Alpin 36h rims with typical brake wear. Would consider both sets for one set of the
"right" rim.

i seek a mid 80's mavic strm bolt.
this is from the cilo that was gifted to me, ans when i went to adjust my bars it twisted in two cleanly with no effort.
you can see someone in the past had f* cked the back side uo and had to file / grind ??? two flat sides on it to open the stem.
looks like someone that considers vice grips a primary tool ...