Originally Posted by Rotten (Post 20035036)

I've got a lonely dust cap at the house but I'm not sure if it is Sugino or one of the ones you need.


Will let you know asap.

Originally Posted by crank_addict (Post 20033419)

Interesting you bring this up. Recently acquired a one owner 1997 Silk Path 300. Straight bar, hybrid, 700c and 45mm travel Headshok.

After a well needed full service and clean, I converted it to a road drop, Sora dual control STI, shorter stem (exclusive CODA), fit new Conti Speed something or other 42 mm width rubber. With the new rubber and consumables, I'm into it for $150. Heavier machine but highly capable to cover all sorts of terrain. Honestly think these bikes are ugly but do like the robust feel and seem rugged enough to take hard use. All aluminum one would think it a harsh ride, yet its incredibly plush, best of anything I have.

Anyways, since this recent find I've scouted around for similar Cannondales. These hybrids are out there and $150 is the going rate. I'd recommend it vs. a mountain bike. The platform is there with hardly any mods needed.

Originally Posted by tarsi (Post 20035450)

Thank you!

Originally Posted by USAZorro (Post 20035438)

ISO - Campagnolo Record or Gipiemme front hub with skewer - 36 holes, with black clip over vestigial opening.

have - several derailleurs (front and rear), freewheels, some tubular rims, other odds and ends.

Originally Posted by obrentharris (Post 20035838)

I have an orphan Campy Record Low flange front hub.
I'm currently looking for:
Crane GT rear derailleur
First generation long-cage Suntour Cyclone
Various Mavic derailleurs, headsets, cranks.
Campy aero pedals
Shimano 5-speed or 6-speed 13-26 or 14-26 freewheel
Matching pair of tubular rims of various manufacturers

If you don't have any of these items but are interested in the hub let me know anyway. We'll work out something.
Brent

Originally Posted by obrentharris (Post 20035838)

I have an orphan Campy Record Low flange front hub.
I'm currently looking for:
Crane GT rear derailleur
First generation long-cage Suntour Cyclone
Various Mavic derailleurs, headsets, cranks.
Campy aero pedals
Shimano 5-speed or 6-speed 13-26 or 14-26 freewheel
Matching pair of tubular rims of various manufacturers

If you don't have any of these items but are interested in the hub let me know anyway. We'll work out something.
Brent

Originally Posted by greg3rd48 (Post 20036583)

I have an NOS green Vittoria tubular tires. Since I have no tubular wheel sets this can move on. If someone is interested in a trade let me know. I am uncertain about needs at the moment but am open to anything.

https://farm5.staticflickr.com/4551/...1edcba9d_h.jpgUntitled by irishbx4th, on Flickr

https://farm5.staticflickr.com/4551/...1edcba9d_h.jpgUntitled by irishbx4th, on Flickr

https://farm5.staticflickr.com/4582/...3266463d_h.jpgUntitled by irishbx4th, on Flickr

Originally Posted by tarsi (Post 20034853)

Looking for a single (if an exact match) or pair of similar dust caps to those pictured below.

Originally Posted by rhm (Post 20039295)

I have one just like that, I mean it's really just like that except for one little detail, viz: the hole in the center, which should be hexagonal, is round. Yours if you want it. It looks great, but it's hard to remove....

Originally Posted by noglider (Post 20041088)

Drill a pair of holes in it, opposite each other and equidistant from the center.

Originally Posted by veganbikes (Post 20045121)

ISO: a 1" threaded cantilever 26" suspension fork of decent quality. Obviously I need to measure the old steerer tube and figure out the size but is for an old early 90s Klein (I believe early 90s) if that helps. I would love a RS Judy but probably don't have RS Judy money or at least not a rideable one.

Originally Posted by wesmamyke (Post 20045456)

Do you have a current blown out suspension fork? Don't have a complete working 1" fork, but lots of spare parts for rebuilding Rockshox stuff if you have a blown out Mag or Judy.

Also have a Manitou 3 with a giant pile of various steerer tubes, needs a rebuild with elastomers but not seized.

Also have tons of Marzocchi stuff, one part short of a 1" Z-2 atom bomb. Have 1" steerer and shim, need crown.

Originally Posted by joesch (Post 20047819)

Need some campy pedals for the Eroica California. I have lots of cycling stock for trade including a new The Giro Advantage 2 helmet, Giro gloves, mint campy record shifters for braze on, tires including some nos victoria tubulars, and new clinchers, etc. I do have nos christoph clips and straps that could be traded incase the pedals already have. email me at joesch at woodtennis dot com for any possibilities

Originally Posted by wesmamyke (Post 20046451)

That's gonna be tricky to find in 1" threaded, looks like a long steerer. To correct my own post the Manitou is a 4, not 3. Might actually have a super long steerer for that one.

Is that an RST fork? Think I've got a blown out one of those myself. A local guy who sold his shop had a pile of RST rebuild parts, bought almost everything suspension fork related he had except the RST stuff as I had no idea how to work on them.

Originally Posted by curbtender (Post 20046201)

Nice one... from catch of the day.

Originally Posted by jeirvine (Post 20049238)

PM sent. I have a spare pair of SL pedals, and an orphan left if you are looking to piece a pair together.

Originally Posted by curbtender (Post 20046201)

Nice one... from catch of the day.
http://i66.tinypic.com/24pwd2s.jpg