ISO. 3t Record stem bolt from the 70 `s.

If anyone has an old beat up or cracked 3t Record quill stem sitting in the parts bin I could use that long stem bolt as mine is a bit stripped for my Allen Wrench.

I have things to trade.

ISO: R rear dropout/RD hanger for an '87-'89 Bridgestone Radac, the cast aluminum one.

No, I don't expect anyone to have one, but a wrecked Radac would be welcome, and I'll try to replace the R side stays/dropout.

Thanks. We all had to have our pictures taken at work, and we had a professional photographer take them.

I have a "this bike is my car" bell NIB...
The front fork of old treks is pretty tight in terms of fender room up top.

As for The narrow placement of the canti studs -- it seems to me that the shorter v brakes would allow the pads to be farther away for a given length of cable between the brakes? I'd like to try them, so let's exchange addresses. Cheers!

Never seen such a thing, not a cracked one anyway but you could try a bit larger/tighter Allen (think 1/2 size metric or odd fraction inch size), get a new high quality one and use it to swage the hole by tapping it in with a hammer to make it a new size. ;)

I've seen several stem bolts, including 3ttt, on eBay many times. If I come across a listing shortly I'll post it.

Bill

Thanks. If I find one on eBay for a reasonable price, that will work. If not, I can grind down a bigger Allen Wrench to fit the one I have. :)

ISO - C-Record era Campy braze on FD for 8 speed build. Also long shot looking for a 6 speed Synchro yellow insert for another project. I have a couple of 7 speed inserts or cash for trade

OK I got antsy and bought a FD on eBay. Still looking for the yellow Syncro miracle

Have for the FD

Veloce Silver Clamp on 32 mm
Record Silver (8v, 9v?) 35 mm
Centaur 10v 35 mm, smoky gray finish
Dura Ace 9 speed braze on FD
Other Campy bits, a few 9 speed shimano items, or cash.

hey guys it's been a while! I have a lemons centurion 54cm frame I need to rehome, it's taking up much needed space in my apartment. I'm looking for a good saddle for my girlfriends bike, some random accessories (saddle bags,tools, etc...)let me know if you're interested

pm me!

28 x 1- 1/2 Raleigh rod brake wheel
 

ISO one rear 28 x 1-1/2" 40 hole Raleigh rod brake wheel, if you only have the actual rim without hub and spokes that's good too. :) Please let me know what you have. Thanks! ;)

ISO: Raleigh super course frame or 70's fuji frame. 56-58cm frame.

Whenever you write stuff like this, you should specify size.

Thanks for the reminder.

Creepy, actually.

Are you looking for the laid back early 70s or the more upright racy late 70s, 77 or later.

Any Fuji frame, in any shape?

Got a '76 Gran Tourer which hasn't materialized into anything, despite piling up the equipment. I've been lazy as hell about taking paint stripper to it. You'll find several posts on this page about it: http://www.bikeforums.net/classic-vi...-u-j-i-26.html

Frenchness! Still looking to trade some French parts for some other French parts for my Gitane project.


Have:


A 61 cm Tour de France frame from 1970. It's in good shape but was professionally repainted (and improperly decaled) in the past so no more chromed fork/stays. Photos and addition details available if anyone is interested.


One pair French threaded Lyotard pedals. They seem to be the model 45ca, judging from the photo in Velobase (the attached image is from Velobase, and doesn't show the actual pedals). They seem to be unused, but show some marks and minor stains on the aluminum. Chromed steel barrel is in perfect shape. Very presentable overall, though the ancient grease feels very stiff.


Want:


A pair of French-threaded Lyotard or similar pedals suitable for my gigantic feet. No quill-type pedals, in other words. Lyotard 240s or 460s would work, or the Marcel Berthet model.


46- or 47-tooth Stronglight 93 chainring in at least very good condition.


A pair of clamp-on Simplex Retrofriction downtube shifters.


A pair of Suntour barcons (I know, not French, but sometimes a person just wants something that works well and isn't hard to find).

Early 70's.

I have a late 70's maroon Fuji America .. fully built up, I' double check the size if you're interested. It was headed to Craigslist.

Scott

ISO On One Midge handlebars, prefer 25.4 clamp but would consider 31.8.

Have: various road bars, other random bits.

I have a 42 and 46cm salsa woodchipper if you would like to try that out, both are 31.8

I've got a pair of nice 460s, but pretty sure theyr'e standard thread and you'd hafta fight me for them :lol:

If you'll go with something slightly heavier but platform-y, I've probably got 15 pairs of Lyotard 136R I can afford to part with.

I can dig through my bins and see what I have, maybe there's something else. what period are you hunting? 60s, 70s or 80s?

PM sent about the fuji.

ISO - stem in 115 or 120 with a 26.0 clamp - prefer 3T, ITM, Cinelli (if known for sure 26.0) - Failing that I need a set of Cinelli 64-40's .

Have: 3T stem in 80 and 100 mm, Cinelli 1A in 70 mm, a set of Cinelli 64-40's that are bent more than I thought ...

Also have a few extra bottom brackets and front der.

For a pair of 460s, I would re-tap to standard thread. But then I'd have to fight you, so go ahead and keep them


Interesting enough, I just measured my pedals and found that although I'd always thought they were 240s, it turns out that they're actually 460s. Whatever they are, they're by far my favorite pedal--for some reason, my shoe slips into the toe clips with no hunting around, unlike some of the other pedals I have.


I'm looking for a set of pedals for my 1973 Gitane TdF project. My old one--with a too-small frame that I'm looking to move on--came with the 460s mentioned above, which are now on my Peugeot.


PM incoming re your offer of a set of 136Rs. They're wouldn't be my first choice, but pedals are easy to swap out and there's much to be said for being able to ride and enjoy a bike while looking for the part or parts that you really want. So thanks!