SR (Sakae Ringyo) crank specs
03-21-17 | 07:23 PM
#1
Thread Starter
Newbie
Joined: Mar 2017
Posts: 1
Likes: 0
SR (Sakae Ringyo) crank specs
looking to upgrade from an double road chainset 40/50T 118 BCD stamped SR Apex to a single touring chainset (36T) 110 BCD stamped Sakae SA
cant find any info if these would share or atleast be likely to share similar BB axle lengths
cant find any info if these would share or atleast be likely to share similar BB axle lengths
03-21-17 | 09:25 PM
#2
Senior Member
Joined: Feb 2012
Posts: 19,381
Likes: 5,528
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Do you have the cranks in hand? If so then you have the ability to answer your own question. Watch for both spindle length as well as taper fit. Some early 1970s Asian alloy cranks had different taper angles.
BTW it's hard for this old tourist to use the terms "touring" and "single chainset" in the same breath. Must be your terrain is flatter then mine is. Andy
BTW it's hard for this old tourist to use the terms "touring" and "single chainset" in the same breath. Must be your terrain is flatter then mine is. Andy
