Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Show us your vintage mountain bikes!

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Show us your vintage mountain bikes!

Old 03-14-13, 08:00 AM
  #3226  
Member
 
Join Date: Jul 2012
Posts: 43
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Drummerboy1975
My 1992 purple to blue fade, with a bunch of upgrades. New Bontrager saddle, FSA seat post, Salsa bars, Vintage ergo grips, STX thumb shifter/brake combo, upgraded to LX rear derailour, SPD clipless pedals. It's steal and heavy, but a great riding bike.

I have that same, err, distinctive paint job on the bike I bought last summer. I actually really like the bike, except it's too small for me. I'm still riding it on some light-moderately light trails, though. I also thought it was pretty light. Could be because it's so small. Want to find something like it in the right size.
ditchbanker is offline  
Old 03-14-13, 09:17 AM
  #3227  
Senior Member
 
Join Date: Jan 2008
Location: On the trail
Posts: 585
Liked 5 Times in 3 Posts
Race Day:

Aemmer is offline  
Old 03-14-13, 09:22 AM
  #3228  
Senior Member
 
Join Date: Jan 2008
Location: On the trail
Posts: 585
Liked 5 Times in 3 Posts
Oops...
Aemmer is offline  
Old 03-19-13, 02:59 PM
  #3229  
Senior Member
 
3speedslow's Avatar
 
Join Date: Oct 2010
Location: Jacksonville, NC
Posts: 9,408

Bikes: A few

Liked 1,171 Times in 668 Posts
High Plains Schwinn 1991 as it is now. Could change as the warmer climate begins Flat bars,seatpost,saddle,grips,pedals and tires are new to the bike .Brass Crane bell added for moving obstacles.
Attached Images
File Type: jpg
various 002.jpg (98.0 KB, 262 views)
3speedslow is offline  
Old 03-19-13, 03:37 PM
  #3230  
Senior Member
 
dveneman's Avatar
 
Join Date: Apr 2009
Location: Central CA
Posts: 98

Bikes: 1980 Gios Torino Super Record, 1989 Bridgestone RB2, 1985 Trek 520 Touring Rig, 1983 Trek 720, 1985 Guerciotti Sprint, Panasonic DX5000, Miyata 916, 1989 Bridgestone MB2, '87 Schwinn High Sierra, Miyata Ridge Runner

Likes: 0
Liked 2 Times in 2 Posts
Lugged Trek 950 Single track with rack and new street tires. Excellent condition as found. I scored this from a CL seller a while back and finally found a home for it. Gave it to a friend who recently moved back to the area and had no bike at all. It fits her well. Oops, pics later
dveneman is offline  
Old 03-19-13, 04:10 PM
  #3231  
Senior Member
 
DMC707's Avatar
 
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,394

Bikes: Too many to list

Liked 1,126 Times in 747 Posts
Any suggested or perceived cut-off to what would be perceived as "vintage" for an MTB ? I have a Yeti FRO and a couple of Tange PRestige built MArins from the mid 90's -- but i think with Linear Pulls and first gen Aheadsets and clamp-on stems

--- if those are game i'll crawl in the attic , dust 'em off and snap a couple of pics !
DMC707 is offline  
Old 03-19-13, 05:02 PM
  #3232  
Chainstay Brake Mafia
 
Join Date: Mar 2011
Location: California
Posts: 6,007
Likes: 0
Liked 11 Times in 10 Posts
^ post pics!
frantik is offline  
Old 03-19-13, 07:49 PM
  #3233  
hi
 
YoKev's Avatar
 
Join Date: Apr 2006
Location: Kingston, NY
Posts: 2,605
Likes: 0
Liked 3 Times in 3 Posts
Originally Posted by Aemmer
Race Day:

YoKev is offline  
Old 03-23-13, 11:49 PM
  #3234  
Junior Member
 
enjoybikes's Avatar
 
Join Date: Mar 2008
Location: montana
Posts: 198

Bikes: Early 90's Pinarello Gavia, '84 Guerciotti, '91 GF Hoo Koo e Koo, '88 Giant Iguana, '09 Specialized XC

Liked 10 Times in 1 Post
MTM Glacier XT 6000, Tange MTB and Full Deore group. $25 at the ol thrifty.




enjoybikes is offline  
Old 03-24-13, 12:04 AM
  #3235  
Chainstay Brake Mafia
 
Join Date: Mar 2011
Location: California
Posts: 6,007
Likes: 0
Liked 11 Times in 10 Posts
^ very nice pick up, especially for $25! That Deore II stuff looks nice and those cantis are my favorite of any cantis. The SLR brake levers combined with the SLR cantis have awesome response and lots of braking power

Shimano only offered that group in 1989 so i'd guess that is the year of your bike.. never heard of MTM before but can't see anything to complain about.. plus it came with a rack! nice

Last edited by frantik; 03-24-13 at 12:10 AM.
frantik is offline  
Old 03-24-13, 12:22 AM
  #3236  
Junior Member
 
enjoybikes's Avatar
 
Join Date: Mar 2008
Location: montana
Posts: 198

Bikes: Early 90's Pinarello Gavia, '84 Guerciotti, '91 GF Hoo Koo e Koo, '88 Giant Iguana, '09 Specialized XC

Liked 10 Times in 1 Post
^yes, there's remarkably little online about them, even an image search turns up nothing. The only other MTM mountain bike I've seen was at the same thrift store. I have seen one listed on CL locally here. Both have Montana names, "beartooth" and "glacier". Wonder if this is something local to me here in Montana.... hmmm. The "beartooth" bike I saw wasn't of the same quality material/components, but still seemed better than your standard dept store bike. Need to do some scooby doo mystery solving.
enjoybikes is offline  
Old 03-24-13, 05:10 AM
  #3237  
Cisalpinist
 
Italuminium's Avatar
 
Join Date: Jan 2011
Location: Holland
Posts: 5,557

Bikes: blue ones.

Likes: 0
Liked 17 Times in 12 Posts
Originally Posted by Aemmer
Race Day:
The amount of win in this photo is through the roof.
Italuminium is offline  
Old 03-24-13, 06:19 AM
  #3238  
Senior Member
 
Join Date: Oct 2008
Location: North Ogden, Utah
Posts: 890
Liked 722 Times in 277 Posts
Originally Posted by DMC707
Any suggested or perceived cut-off to what would be perceived as "vintage" for an MTB ? I have a Yeti FRO and a couple of Tange PRestige built MArins from the mid 90's -- but i think with Linear Pulls and first gen Aheadsets and clamp-on stems

--- if those are game i'll crawl in the attic , dust 'em off and snap a couple of pics !
A Yeti FRO definitely qualifies to be in the vintage mtb thread. I would guess the defining features of a vintage mtb would be: rigid fork, cantilever, U-brake, or rollercams, and threaded headset. But this is by no means a definitive list. As time goes on the definition of classic/vintage seems to shift, as well.

What I wouldn't give to get my hands on a Yeti FRO.....
Smokinapankake is offline  
Old 03-24-13, 08:48 AM
  #3239  
Back to Biking
 
stedanrac's Avatar
 
Join Date: Aug 2007
Location: Carlisle, MA
Posts: 87

Bikes: Surley LHT, Salsa Casseroll, Vintage Trek 830 MTB

Likes: 0
Liked 0 Times in 0 Posts
1984 Trek 830 MTB (and questions on modernizing)

Hi Folks,

I have some pictures or my 1984 Trek 830 mountain bike. It is a 501 frame and was the low end of the line (I know because I bought it new back then and have ridden it since). The frame is beautifully lugged.

I'm looking for some opinion/help on updating this. As you see, I had the frame powder coated (it was really banged up before). I now need to replace the front cranks cause of a misthreaded pedal (my bad). Once I look at changing that, I figure I'll swap out the BB, then I look at that old cassette and derailleur in the back (I pulled the front and am happily running it as an 8 speed). That leads me to look at the hubs, then whole wheels, you get the picture. By that point we're about $300 bucks in using low end stuff. What do you think? The old parts have lived a good life, not been abused, but sometimes age just has a way of weakening things ( wow, maybe I'm talking about me and not the bike)

I'm trying to get it solid because I'm doing a 40 mile charity ride with the little dude in the trailer (see pic below) and I want it running well.

Thanks in advance as always!
Steve









The original picture must be summer 1987:


Last edited by stedanrac; 03-24-13 at 10:30 AM. Reason: image problems
stedanrac is offline  
Old 03-24-13, 09:17 AM
  #3240  
Full Member
 
jdefran's Avatar
 
Join Date: Feb 2011
Posts: 333
Likes: 0
Liked 5 Times in 1 Post
Originally Posted by stedanrac
Hi Folks,

I have some pictures or my 1984 Trek 830 mountain bike. It is a 501 frame and was the low end of the line (I know because I bought it new back then and have ridden it since). The frame is beautifully lugged.

I'm looking for some opinion/help on updating this. As you see, I had the frame powder coated (it was really banged up before). I now need to replace the front cranks cause of a misthreaded pedal (my bad). Once I look at changing that, I figure I'll swap out the BB, then I look at that old cassette and derailleur in the back (I pulled the front and am happily running it as an 8 speed). That leads me to look at the hubs, then whole wheels, you get the picture. By that point we're about $300 bucks in using low end stuff. What do you think? The old parts have lived a good life, not been abused, but sometimes age just has a way of weakening things ( wow, maybe I'm talking about me and not the bike)

I'm trying to get it solid because I'm doing a 40 mile charity ride with the little dude in the trailer (see pic below) and I want it running well.

Thanks in advance as always!
Steve








The original picture must be summer 1987:

Pics didn't show for me. Sounds like you need a donor bike for parts. How's your local Craigslist? Several people here on the forum pick up complete bikes for the parts and sell the frame
jdefran is offline  
Old 03-24-13, 09:21 AM
  #3241  
I Love My Dream
 
Join Date: Jan 2008
Posts: 1,075
Likes: 0
Liked 3 Times in 3 Posts
Originally Posted by Sixty Fiver
If you refer to the Arvon frames, they are filet brazed and the only lug is at the bottom bracket and these had to be customized to fit the "mesa oval" tubes which were also custom drawn for these and many other bikes we build.



Do you have any photos of recently built Arvon frames?
Saddle Up is offline  
Old 03-24-13, 09:24 AM
  #3242  
Senior Member
 
Drummerboy1975's Avatar
 
Join Date: Jul 2011
Location: Arkansas
Posts: 1,367

Bikes: '81 Fuji Royale/ '96 Rockhopper

Liked 6 Times in 4 Posts
Originally Posted by ditchbanker
I have that same, err, distinctive paint job on the bike I bought last summer. I actually really like the bike, except it's too small for me. I'm still riding it on some light-moderately light trails, though. I also thought it was pretty light. Could be because it's so small. Want to find something like it in the right size.
Yea I love riding mine. Let's see yours.
Drummerboy1975 is offline  
Old 03-24-13, 10:31 AM
  #3243  
Back to Biking
 
stedanrac's Avatar
 
Join Date: Aug 2007
Location: Carlisle, MA
Posts: 87

Bikes: Surley LHT, Salsa Casseroll, Vintage Trek 830 MTB

Likes: 0
Liked 0 Times in 0 Posts
Hopefully fixed images... thx for the heads up.
stedanrac is offline  
Old 03-24-13, 11:41 AM
  #3244  
Senior Member
 
Bikedued's Avatar
 
Join Date: Jul 2004
Posts: 10,963
Liked 108 Times in 61 Posts
Originally Posted by stedanrac
Hopefully fixed images... thx for the heads up.
This is mainly what it needs. Nice powdercoat job, a LOT of places would have filled in the seat stay cap lettering, and made unreadable! I have this exact model and year, but just a hair too small for me.,,,,BD


https://www.velocals.com/servlet/the-...k%2C830/Detail
__________________
So many bikes, so little dime.
Bikedued is offline  
Old 03-25-13, 06:18 AM
  #3245  
Newbie
 
Join Date: Jul 2009
Posts: 67
Liked 10 Times in 3 Posts
Originally Posted by stedanrac
Hi Folks,

I have some pictures or my 1984 Trek 830 mountain bike. It is a 501 frame and was the low end of the line (I know because I bought it new back then and have ridden it since). The frame is beautifully lugged.

I'm looking for some opinion/help on updating this. As you see, I had the frame powder coated (it was really banged up before). I now need to replace the front cranks cause of a misthreaded pedal (my bad). Once I look at changing that, I figure I'll swap out the BB, then I look at that old cassette and derailleur in the back (I pulled the front and am happily running it as an 8 speed). That leads me to look at the hubs, then whole wheels, you get the picture. By that point we're about $300 bucks in using low end stuff. What do you think? The old parts have lived a good life, not been abused, but sometimes age just has a way of weakening things ( wow, maybe I'm talking about me and not the bike)

I'm trying to get it solid because I'm doing a 40 mile charity ride with the little dude in the trailer (see pic below) and I want it running well.

Thanks in advance as always!
Steve









The original picture must be summer 1987:


That's a really nice bike, and the new powdercoat looks superb. I wouldn't put new parts on it. I would use the parts you have, after a good cleaning and refreshing. If you need to replace anything I would try to get parts that are "period correct". That bike would just look so much better with all of the old components, but that's just me. Cool pics too!
69tr6r is offline  
Old 03-25-13, 08:34 PM
  #3246  
I like chrome.
 
Donkey Hodie's Avatar
 
Join Date: May 2006
Location: Northeast
Posts: 285

Bikes: 1983 Specialized Stumpjumper, 1986 Mongoose ATB

Likes: 0
Liked 0 Times in 0 Posts
Just picked up this 1986 Mongoose ATB that was on craigslist for 70.00 bucks. I love these old Mongoose ATBs. My first real geared bike was a light blue one. I kind of like the clean look of the seat-stays due to the chainstay U-brake. When I picked it up it had a good amount of light rust on the frame and fork, but I've gotten most of it off with aluminum and water. It is shining up really nice. I just gotta give it an overhaul, maybe a new rear derailleur, a seat, and I was thinking maybe either either a drop bar set up, or possibly a Bosco bullmoose bar set up. These frames are set up with double eyelets front and back, so it would probably make a great tourer or commuter.


Last edited by Donkey Hodie; 03-25-13 at 08:39 PM.
Donkey Hodie is offline  
Old 03-25-13, 08:36 PM
  #3247  
I like chrome.
 
Donkey Hodie's Avatar
 
Join Date: May 2006
Location: Northeast
Posts: 285

Bikes: 1983 Specialized Stumpjumper, 1986 Mongoose ATB

Likes: 0
Liked 0 Times in 0 Posts
oops. double post. Don't know why that happened.
Donkey Hodie is offline  
Old 03-26-13, 06:55 AM
  #3248  
a77impala
 
a77impala's Avatar
 
Join Date: Oct 2005
Location: Central South Dakota
Posts: 1,519

Bikes: 04=LeMond Arravee, 08 LeMond Versailles, 92 Trek 970

Liked 13 Times in 8 Posts
I am visiting Austin TX and am amazed at the number of bikes on CL. But can't figure the pricing, Trek 800 and 830s asking price $150 to $300, a 930 was priced at $80, if I didn't already Have a '93 930 it would be mine.
a77impala is offline  
Old 03-26-13, 09:22 AM
  #3249  
a77impala
 
a77impala's Avatar
 
Join Date: Oct 2005
Location: Central South Dakota
Posts: 1,519

Bikes: 04=LeMond Arravee, 08 LeMond Versailles, 92 Trek 970

Liked 13 Times in 8 Posts
The 930 I saw was Lugged steel bike, no suspension. According to the color I believe a '93, the last year for lugged frames.
I think the one you refer to is a '98.

Last edited by a77impala; 03-26-13 at 09:25 AM.
a77impala is offline  
Old 03-26-13, 09:26 AM
  #3250  
Senior Member
 
ka0use's Avatar
 
Join Date: Aug 2011
Posts: 1,141
Likes: 0
Liked 2 Times in 2 Posts
Originally Posted by wildjim
1993 Specialized Hardrock

It's the oldest Mountain bicycle I own. Is it vintage?

I purchased it for $20 but it was ridden honorably to near death. The BB spindle was grooved so that it was ready to break.

All the parts disassembled easily; which made it enjoyable to repair. So I completely disassembled it and greased all the bearings, stem and seat post.

The original headset seems to be in fine condition, easily adjustable and smooth turning.

I trued the original rear wheel straight but it required some uneven spoke tensioning and many of the spoke nipples were rusted and required replacement so I decided to replace the wheel instead.

It appears to have been kept indoors as the paint is chipped from usage but there is no rust inside the frame. The frame appears to be in good shape overall. The paint appears Blue and or Green depending on the lighting conditions.

I have replaced the Rear wheel, Seat post, Chain, Cables, BB, Freewheel, Handlebar grips and Pedals. The seat is torn at the edges but it's functional.

The price of restoration to this point is $112 in parts.

It rides smooth and quiet with a reborn spirit. . .


verrrrrrry nice! shiny!
ka0use is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.