WTT frame/fork/headset for one in my size(24 inch seat tube). I know someone here has a DX4000 that is too big for them?? This is probably early nineties, since it is one of the custom paint bikes that had to be ordered through a Panasonic dealer, and has a unicrown fork. Frame/fork must be at least decent shape, and Tange 2 tubing if possible.,,,,BD


http://i114.photobucket.com/albums/n...ker/DX4000.jpg

Kurt - typically, threadless stems are 1-1/8", and use an internal insert to fit to fit over a 1" steerer tube. If that will do, PM me. I have a pile of stems in various sizes, and an insert. Alternately, if you already have a 1-1/8" stem, the insert/shim is cheap and commonly available at most LBS's.

I need a side pull caliper that pulls from below, or can be made to pull from below - from the left or non-drive side in the rear. A matching front/rear set would be preferred. This is for a mixte that only has a traditional rear brake bridge, and the cable routes down the left side.

Something similar to this:

http://www.classicrendezvous.com/ima...ural_Uni_1.jpg

Seeking:

Suntour Superbe Pro: headset
Suntour Superbe Pro: seatpost
Suntour Superbe Pro: track hubs
Campagnolo C Record track chainring (ideally 47t or 49t)

I don't know if headset and seatpost were different for the Superbe Pro road and track groups.
Thanks!

looking for,
an ATAX stem, French 22.0 size, 90 or 100 mm, I need the more modern looking version like Peugeot used in the 80's on P6's and P8's.

Thanks in advance.

hello, a visitor from the fixed gear forum...

looking for a Lotus road fork for a large frame (60 cm seat tube--need about 24 cm steerer tube). color doesn't matter. PM me with offers. thanks, y'all.

want a pat 79 campy nuovo record rear derailleur. only nuovo record and only 79.

Was there just a "Record" RD? I believe it would either be Nuovo or Super Record. Can't find any reference to one.

Want:
A white turbo-esque saddle
Nicer 26.2mm Seatpost

you're right. nuovo record. thanks.

Still looking for 36h 7400 series Dura Ace hubs. 6-7-8 spd as long as they are cassette and not freewheel.

Sun Ringle CR18 rim in 650a size (26 x 1 3/8), 32 holes. Or any aluminum alloy rim of those dimensions.

Thanks - Mark - mcclure606@yahoo.com

Campy 10 cassette
 

I've got a bunch of Campy Chorus 10-speed cassettes that I would rate in "good" condition -- one 13-26 and about five 13-29s. I replace my cassettes at 5,000 miles whether they need it or not. Sooner or later, I plan to auction the used cassettes on eBay, but send me an email if you are interested. Considering the cost of new Chorus cassettes, I'm thinking $25 plus shipping would be a fair asking price.

Send me a PM if interested.

25.4 chrome (steel) seat post for a 1977 Raleigh Grand Prix Mixte

i really need a bolt for a 3ttt/ambrosio adjustable stem
it's the one that secures the movable extension

Ok. Not exactly vintage but I'm looking for 9 speed DA or Ultegra downtube shifters.

I have a 26.4 (in case that's a typo).

7400 dura ace front hub 32h

I think I may have a 26.2mm 2 bolt campy post, condition is unknown till I dig it up. PM if interested.

Welcome back Mr. Corky's dad! :)

I need a 1" lugged touring fork preferably threaded with canti studs and fender braze ons. Frame size is a 54cm so a longer steerer would be nice so I can cut and thread it to the length I need. 700c or 27".
Thanks,
Kelly D

Nice NOS 32h tubular rims.

Campagnolo Super Record fluted 27.0mm seatpost. The nicer the better.

Shimano Crane GS long cage rear derailleur.

John

Found one, thanks
Kelly D.