Looking for: 62-65cm lugged track frame & forks!

Thanks barndoor, but I need classic bends.
I would also be interested in Nitto's with a 26.0 clamp, grooves not necessarily, um necessary

ISO/WTB: Suntour Superbe Pro Clincher Wheelset 126mm rear using these hubs:

yep...looking for :
-Shimano Arabesque Braze-on downtube shifters:).
-Selle San Marco Regal white saddle.

i have:
-Shimano Arabesque Clamp-on shifters (looks like 2 sets after purchasing a set off of ebay last night without knowing what i was really purchasing:rolleyes:)

i don't really have much other stuff to offer...i'm too new at this to have collected much:).

thanks - wp.

I have a feeling you may be able to just take the shifter bodies off the clamp and mount them on downtube bosses. You may need the Shimano mounts, but I'm sure you could find some somewhere. Is there anyone who has done this with these particular shifters?

I have a nice set of new scott pedals (shimano)

http://cgi.ebay.com/ws/eBayISAPI.dll...m=250193928394

I tried them once, but don't like them for city riding (too much stop & go). They're basically new in the box - I think they're nice. I would like to trade for a platform pedal (no cage or clip-in). I can add a few bucks if you have something really nice.

I am sorry to have to tell you that shimano 600 arabesque as far as I know are designed for proprietary braze-ons. The used M4 (instead of M5) bolts and were shaped different. You might be able to make them work with an M5 bolt on a normal braze-on, I don`t know.

ok. so can i just get M5 bolts? can these be purchased somewhere?

i have found a "Shimano 600 EX shifter update for campagnolo brazed on" on ebay.

here's a pic of the parts attached:

Hey, nice work. How convenient. I think that might be just the ticket and you can use the shifters from your clamp ons. Shimano 600 EX used the same design, so I think it should work though I can't guarantee it.

Wanted:

- Crown race and lower frame cup for Tange Levin headset, 1" threaded (26.4). This is for the older Levin model, with the word "Levin" in cursive, although I don't know if it'll make a difference. Also, I don't know if the came in any other colors besides silver, but I'm looking for silver.


- Quill stem, silver, 100-110cm w/at least 80mm of extension above minimum insertion line. This is for TTT bars (26.0 clamp?).

Suntour Superbe (not pro) track hubs, 36h
Campy record Pista hub, rear, 36h
24" 520mm Araya or similar TT/Tri rim or front wheel.

I have used arabesque shift levers on normal downtube shifter brazeons with no issues. Perhaps they aren't all the same.

i'm going to find out this evening :).

Looking for a Selle Italia Campionissimo saddle, found one, Yellow jeep if you havent found one yet I can you one as well

I have a nice, NOS, Huret FD, with the hard to find, much lusted after by Schwinn afficianados (how do you spell that word??) 1 inch clamp size. This unit comes with the cage with 3 holes in it, and is spiffy. Willing to trade this thing of beauty and everlasting joy for a similar european maker FD such as Huret, Simplex (not the cheap push-rod simplex), or any of a variety of those italian things, with a standard clamp size, to fit my recently acquired Puch "Cavalier" mixte. Thanks!!

62cm touring bike/frame with canti bosses. I have some money and treasure to trade.

jim

Are you looking for someone to build you a set of wheels or are you just using that pic as an example? If you need someone to build them I will (DT certified) for the cost of the parts and shipping.

Rob

ISO/WTB: 86 BCD chainring(s) - any brand, any size over 40T, but the bigger the better.

I'm also looking for a cheap track (or freewheel) wheelset for a budget build - but I'll probably just try to find that locally to avoid shipping costs.

I've run into Arabesque DT levers that use the proprietary braze-on as with the Golden Arrow 105's - can't recall running into one that worked on standard braze-ons, but I wouldn't be surprised if Shimano made such an adapter.

http://www.jaysmarine.com/Shimano_600_downtube_boss.jpg


The one on the right used to be a Shimano-proprietary mount Arabesque - I polished it smooth:

http://www.jaysmarine.com/Shimano_60...erpolish_4.jpg

-Kurt

I'm looking for a pair of platform pedals, for my newly acquired centurion ironman expert. Thanks all!

Im looking for a 1/8" 151pcd chainring 44-49teeth.

I'm looking for those hubs as I already have the rims and a wheel builder. Thanks for the offer.

5 speed 2 notch regina extra or oro freewheel. must have 21 tooth big cog or larger... really a 23 or bigger is ideal but would be willing to consider a 21. I live in BC for crying out loud and the NOS 13-19 isn't gonne cut it. so I have a corncob to trade someone on the flat land.

hmm, a decent folding bike that will fit somebody that is 6' tall. don't have alot to spend so i would perfer a local deal so i spend money on the bike and not shipping. but im open to most anything

I can always relay it for you. Any idea what shipping to the US is?

I'll go check.