![]() |
Originally Posted by badsac
Got it serviced at the shop before the Alpine. Done 200km since then. Now I find the steering is binding up when you turn it very far off center. The thing is only 15 months old so the bearings can't be worn out. You think they might have done something at the shop? Secondly, when I pedal the thing makes a clackety clackety sound, like tiny maraccas. Doesn;t mappen when I coast. Happens in all gears and either sitting or standing, although I do notice it most going slow up hills, I guess because there's less wind noise. It's not the gears cause I've had a play. Thought it might be the bottom bracket or cranks but there doesn't seem to be any play down there and it's still spinning smooth. 2/ My guess would be one farked ball bearing or a slightly pitted race in the BB. If it is Shimano, they run on balls. They can feel smooth by hand but with one farked bearing will creak and click and be rat**** inside. I pulled one to bits once to see if I could fix it. One bearing had disintergrated. It felt smooth but clacked and farted when ridden on. The bastards can't be fixed, they aren't designed to be put back together. You'll have to chuck it and get another one. |
Originally Posted by badsac
Ack, sure did. So are roof racks bad ideas for transporting bikes? I wouldn't have thought they would have put as much stress on stuff as actually riding the thing down a bumpy road?
Bugger. What do headsets cost? :( not sure why it happens. roof racks that hold the whole bike like the pro ones are better....but you don;t need to be hearing that now. $80-$300?? |
Originally Posted by ed073
Every ad is for either ice-cream or a type of ham. Funny.
Every friggin show is either a variety show or a crap talk fest, like a Ray Martin studio extravaganza with a lairy set. |
Originally Posted by saccy
Ack, google says like $200+ for a good un.
|
Originally Posted by classic1
2/ My guess would be one farked ball bearing or a slightly pitted race in the BB. If it is Shimano, they run on balls. They can feel smooth by hand but with one farked bearing will creak and click and be rat**** inside. I pulled one to bits once to see if I could fix it. One bearing had disintergrated. It felt smooth but clacked and farted when ridden on. The bastards can't be fixed, they aren't designed to be put back together. You'll have to chuck it and get another one.
Originally Posted by ed073
not sure why it happens. roof racks that hold the whole bike like the pro ones are better....but you don;t need to be hearing that now.
$80-$300??
Originally Posted by classic1
Don't spend that much. Get a Miche or Stronglight or cheaper Ultegra or something. Expensive headsets are the most overrated componenents IMO. Cheaper sets last fine if maintained...or not put on roofmounts :) (sorry)
|
Originally Posted by ed073
not sure why it happens. roof racks that hold the whole bike like the pro ones are better....but you don;t need to be hearing that now.
http://www.thuleracks.com/thule/prod...t_id=8&sku=594 How about tow ball mounts? I rekon you snap your top tube going over a big bump with those things. |
Originally Posted by badsac
It's FSA for what it's worth. Are they the same? I can hear the cashregister dinging right now. :(
Headsets. Just checked Cecil Walker online - Very nice Stronglight ones for $99. Campag record for less than $170. That was with a 2 second search. |
Originally Posted by classic1
Dunno. I suspect balls and roller bearings in FSA but don't quote me on that. Is it ISIS spline? I've seen quality ISIS spline BB's on ebay for bugger all.
Headsets. Just checked Cecil Walker online - Very nice Stronglight ones for $99. Campag record for less than $170. That was with a 2 second search. $99 at cecils. Probably $250 at the local shop knowing them. Cool. I'm set. :( [Edit] BTW, is there any downside to keeping riding the bike in it's current state till the steering don't turn and the pedals stop turning? |
Octalink is the Shimano spline pattern. I checked FSA website. They have about 15 different BB's with balls, sealed races etc depending on the model. Yours might even be fixable if it is a sealed bearing model!!
I'd attend to the sticking headset asap. BB should be ok for a week or two if you can put up with the click and there are no cracks in the cranks (better check that) or play in the BB. Is this where I put in a legal disclaimer? :) |
Thanks for that. No worries about the legals. I'll be cursing you from my hospital bed or on a cloud no matter what anyway. ;)
|
Originally Posted by badsac
BTW, is there any downside to keeping riding the bike in it's current state till the steering don't turn and the pedals stop turning?
With Shimano stuff its almost always the right cup working loose and it's easy to fix: just have to pull the whole crank assembly apart to get to it :) And once you get it it keeps coming back more and more frequently. I only bother the LBS once with this problem before shoving a new BB assembly in. Pay as much or as little as you want. 105 BB is just as good as Ultegra for training/general riding IMHO. |
Racing was just great last night. :rolleyes:
Pointscore leader took the night off so it was my big chance to make up some ground on him. As fate would have it the guy running third on the pointscore was blisteringly fast and made up 5 points on me instead! To make matters worse the handicapper finally got wise and halved my handicap for the one lap screamer. Oh the pain... In the end I made a miserable 3 points on the leader instead of 10. I hate being slow... :( Funniest part of the night was the Miss'n'Out grade handicap. Riders were having trouble hearing the calls, so PShaw generously offered to be the relay caller 20m up the track. Trouble was the riders were then calling for an interpreter coz they couldn't understand the thick Scottish brogue :roflmao: Sorry Paul :) It was bloody funny tho. |
ahaha. I didnt think Paul's accent was that bad.
|
who's 3rd? Brad?
On a side note, have you heard anything about anybody wanting to nominate for pres or vice pres etc. on the 21st? Damon won't be running. I'm tryng to think or some people who would be good at it and try to talk to them. Need some names..... |
Aberdeen 2 (Smith 34, Lovell 43)
Rangers 0 :( Chelsea 2 def. Liverpool 0 :) |
Originally Posted by climbo
who's 3rd? Brad?
On a side note, have you heard anything about anybody wanting to nominate for pres or vice pres etc. on the 21st? Damon won't be running. I'm tryng to think or some people who would be good at it and try to talk to them. Need some names..... I'll email you the names of some victims, and I'll second the nomination of every one of them for you!! MEWHAWHAWHawHawHaaaaarrrrrghuh!! |
Originally Posted by jock
yup (in A Grade that is. Ray Van Schie slipped into the mix last week, but didn't do so well last night I don't think)
I'll email you the names of some victims, and I'll second the nomination of every one of them for you!! MEWHAWHAWHawHawHaaaaarrrrrghuh!! Ended up with -/2/4/-/6 (derny) Troy M beat me in the 1 lap hcap by a bees dick! I was not a happy bear! I hate being slow! |
Originally Posted by pshaw
I had a shocker too...
|
Originally Posted by jock
Wanna be presidente Mr Shaw?
Tell me how you work out the pointscore? Doesnt it just apply to 1 race each week? |
Originally Posted by pshaw
With my accent? I'm excused.
Tell me how you work out the pointscore? Doesnt it just apply to 1 race each week? |
Climbo, u unterested?
http://www.maxadventure.com.au/dirtw...tryDetails.htm |
highlighted races score, 2 rounds plus start points each night.
|
Originally Posted by pshaw
Climbo, u unterested?
http://www.maxadventure.com.au/dirtw...tryDetails.htm |
ok, solo, no teams event this year anyway... yeah, it's before my #2 child is due by a month.
|
Originally Posted by climbo
possibly yes, solo or team?
Now I know why magus would help me in my 2 man escape... in the warm-up race :rolleyes: |
| All times are GMT -6. The time now is 02:24 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.