Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Road Cycling (https://www.bikeforums.net/road-cycling/)
-   -   The Aussie Thread- Part 2 (https://www.bikeforums.net/road-cycling/57176-aussie-thread-part-2-a.html)

62vette 06-08-05 04:27 PM


Originally Posted by jock
OMG, the damage to the bike is much worse than it first seemed... Checked it over after I got home and found that one of the end-plugs is missing from the handlebars!!!! :eek: :)

there's only one thing for it - new carbon handlebars, bar tape and end plugs. There's no telling what structural damage the bars have sustained, so better to be safe than sorry :D

jock 06-08-05 04:28 PM

ROFLMAO.


Does anyone know where I can buy a replacement plug? :roflmao:

jock 06-08-05 04:31 PM


Originally Posted by 62vette
there's only one thing for it - new carbon handlebars, bar tape and end plugs. There's no telling what structural damage the bars have sustained, so better to be safe than sorry :D

You're right. I hadn't thought of it that way. In fact there may be a hairline crack in the frame somewhere. That could fail catastrofffically and pose a potential risk to my well being. I guess I'll just have to buy a whole new bike. Bugger :mad:

At least the wife will be pleased that I'm looking after my well being. Thanks for the excellent advice 'vette

badsac 06-08-05 04:34 PM

It's probably still in the gutter.

jock 06-08-05 04:38 PM


Originally Posted by badsac
It's probably still in the gutter.

Yup, and it's probably in lots of little tiny pieces too!

climbo 06-08-05 04:41 PM

stupid question but why can't they just close out the end of the bars with alu/carbon, whatever the bar is made of. why plugs? can't they make the bars close up during the extrusion process?

badsac 06-08-05 05:01 PM

Weight?

Hey, talking about little pieces. My crash has left my pedal all hacked up and as well as the face of my rear derailleur. Me not likes the rash on these parts so I want to do something about it. I thought getting a dremel and cleaning up the pedal wouldn't be an issue, but what about the derailleur? Is that face a load bearing part that might fail if I take to much metal off in the process of smoothing it out?

{edit} for the worst typed post ever.

ed073 06-08-05 05:05 PM


Originally Posted by climbo
stupid question but why can't they just close out the end of the bars with alu/carbon, whatever the bar is made of. why plugs? can't they make the bars close up during the extrusion process?

-would add cost
-some people like to cut down bars (Phil Anderson)
-where would you put your rolled up $5 note for coffees on Lygon? :D

climbo 06-08-05 05:12 PM


Originally Posted by ed073
-would add cost
-some people like to cut down bars (Phil Anderson)
-where would you put your rolled up $5 note for coffees on Lygon? :D

true, but with some of these new fancy bars already costing about half the cost of my whole bike, what's a few extra bucks? :D

climbo 06-08-05 05:19 PM


Originally Posted by badsac
Weight?

Hey, talking about little pieces. My crash has left my pedal all hacked up and as well as the face of my rear derailleur. Me not likes the rash on these parts so I want to do something about it. I thought getting a dremel and cleaning up the pedal wouldn't be an issue, but what about the derailleur? Is that face a load bearing part that might fail if I take to much metal off in the process of smoothing it out?

{edit} for the worst typed post ever.

I'd say it'll be ok if you don't take too much off. Eddy drilled holes in his didn't he?

badsac 06-08-05 10:34 PM


Originally Posted by climbo
I'd say it'll be ok if you don't take too much off. Eddy drilled holes in his didn't he?

Thanks climbo. Didn't Eddies fall apart all the time though?


By the way Expat. Finally sent your maps today. Fark I'm a lazy, forgetful git. :(

ed073 06-08-05 10:36 PM


Originally Posted by climbo
I'd say it'll be ok if you don't take too much off. Eddy drilled holes in his didn't he?


Did I?

Oh hang on....wrong Eddy.

:D

Brian 06-09-05 12:54 AM


Originally Posted by jock
ROFLMAO.


Does anyone know where I can buy a replacement plug? :roflmao:

Kings Cross? Or one for your bars?

pshaw 06-09-05 01:20 AM


Originally Posted by Expatriate
Kings Cross? Or one for your bars?

Geez you americans luv a plug... dont you ;)

Brian 06-09-05 01:36 AM


Originally Posted by pshaw
Geez you americans luv a plug... dont you ;)

Were Mrs. & Mrs. Coyle from "Acid House" your typical Scottish couple? :)

ed073 06-09-05 01:39 AM


Originally Posted by Expatriate
Were Mrs. & Mrs. Coyle from "Acid House" your typical Scottish couple? :)


"The nipples, Doreen.....gimme the NIPPLES!!"

Brian 06-09-05 02:55 AM

That's what I'm saying. I can't picture Groundskeeper Willie ever uttering that though.

climbo 06-09-05 04:17 AM

since the demise of "laneclosed", here's a laugh for you....if you've got time to read any of it....contains the 'heyday' of my racing career and the other goons who named me Climbo way back when....

Most fo the pics are missing but some of them are there in the race reports, some good ones too.

http://web.archive.org/web/200206082...s.com/Main.htm

Brian 06-09-05 04:32 AM

Y'all watch American Chopper tonite?

ed073 06-09-05 04:07 PM


Originally Posted by Expatriate
Y'all watch American Chopper tonite?


That was great. Lance got some serious pace on in the Jay Leno car park!!

That thing sounded fully sick, mate!

jock 06-09-05 04:08 PM

I went for a lite roll this morning (first 4 o'clocker for a couple of months!) and all I can say is "OUCH!" I uncovered some more sore spots that I didn't know I had, and found out that the left knee is pretty goddamn dodgy (ie. unstable).

Should make for an interesting weekend of racing :eek:

climbo 06-09-05 04:17 PM

4am start? was that you going down Karalta Rd at about 6am?

pshaw 06-09-05 04:46 PM


Originally Posted by ed073
"The nipples, Doreen.....gimme the NIPPLES!!"

Man thats funny.... great TV..

'Who've you been seeing.... Madonna... Dolly Parton...!'

pshaw 06-09-05 04:47 PM


Originally Posted by jock
I went for a lite roll this morning (first 4 o'clocker for a couple of months!) and all I can say is "OUCH!" I uncovered some more sore spots that I didn't know I had, and found out that the left knee is pretty goddamn dodgy (ie. unstable).

Should make for an interesting weekend of racing :eek:

I hope you mean 4pm when you knocked off early yesterday..?

ed073 06-09-05 04:51 PM


Originally Posted by pshaw
Man thats funny.... great TV..

'Who've you been seeing.... Madonna... Dolly Parton...!'


Funny? Or sick??


I saw Irreversible on World Movies last week. Bugger me....that was full on.


Monica Belluci.....13 out of 10. Stunner.


All times are GMT -6. The time now is 10:36 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.