Originally Posted by Jaytron (Post 14093705)

Scrod,

What's up with all these Database Errors?

Originally Posted by Jaytron (Post 14093705)

Scrod,

What's up with all these Database Errors?

Originally Posted by Leukybear (Post 14093767)

It's serverside, BF server's are not so healthy as of late; I've been getting the same errors as you are and pages timing out at work where I'm using a ridiculous fiberoptic connection. I've even had to retype this, because of an error.

Originally Posted by yummygooey (Post 14093796)

BF needs a like button.

Originally Posted by Jaytron (Post 14093809)

We have problems man.

http://i.imgur.com/eQzpD.png

Originally Posted by yummygooey (Post 14093796)

BF needs a like button.

Originally Posted by Pinkbullet3 (Post 13906243)

Been noticing some creaking lately when I pull up and down on either side of my bullhorns. I tried applying some light oil to where the stem meets the bar, but the creaking still occurred. When I put pressure on the top cap with my palm, the bar didn't creak (bar and stem felt very solid, as they normally should), so I'm guessing the steerer might be the culprit and not the stem/bar. Any quick tips before I head into the shop tomorrow evening?

Edit: I should also mention that the headset's fairly stiff right now. If I lift my bike up, the front wheel will stay straight unless I push it to the left or right. Then, if I move the wheel back to center, it'll 'snap' back into place.

Originally Posted by Scrodzilla (Post 13906269)

Your headset is likely too tight. To kill two birds with one stone, remove your stem, grease your steerer (just a little) and reinstall, being careful not to overtigthen your top cap.

Originally Posted by Jaytron (Post 14096441)

Where the hell is the serial # on the 722ts?

Originally Posted by Pinkbullet3 (Post 14099217)

I've done this two times and the creaking is starting again. Does it have anything to do with the shim inside the stem?

Originally Posted by ATX 6Speed (Post 14098986)

Why is it that so many people seem to hate on Chub Hubs? I'm just curious since I don't know too much about them.

Originally Posted by City Hype (Post 14101438)

yo scrod. do you have a geometry chart for the excel frameset?

Originally Posted by City Hype (Post 14101438)

yo scrod. do you have a geometry chart for the excel frameset?

Originally Posted by City Hype (Post 14101438)

yo scrod. do you have a geometry chart for the excel frameset?

Originally Posted by striknein (Post 14111805)

*snicker*

Originally Posted by ianjk (Post 14111923)

Scrod: Thinking of doing a century on my track bike this weekend for poos and giggles. I've done them geared and ~70 50+ mile rides fixed.. Am I a poseur if I drive my bike a couple miles in my car to a trailhead to avoid a 700' 10% grade hill on the last mile of the return leg? Should I just HTFU and grow some? Does it even count if I don't ride from my door?