![]() |
Also, maybe this is a silly question.. I have roughly $200-$300 to spend on a new wheelset.
On your site, the Miche Pistard set is on sale for $250. There's also an H+Son Archetype/Formula set that's up for $250. Out of those 2, is either one strongly preferable? Or are they fairly similar in terms of quality. |
Archetypes are a little lighter but they're pretty similar overall quality and either one will hold up just fine. Rims on the Miche set are Ambrosio Pistas.
Miche hubs > Formulas. |
Thanks.
|
Originally Posted by Scrodzilla
(Post 17197603)
Archetypes are a little lighter but they're pretty similar overall quality and either one will hold up just fine. Rims on the Miche set are Ambrosio Pistas.
Miche hubs > Formulas.
Originally Posted by Owlex
(Post 17197689)
Thanks.
|
Have you tried the new all city rings yet?
|
Nope, but they sure do seem nice.
|
Originally Posted by Scrodzilla
(Post 17198675)
Nope, but they sure do seem nice.
|
|
wow what a terrible idea
|
Hey Scrod Love what your'e doing at retrogression Grade site. My question regards the All city thunderdome. I am around six three and a half do you think that the 58cm Thunderdome is to small for me
|
So I'm looking for some drop bars to replace the risers on my Iro Mark V. I want a drop bar that's somewhere between a track and a road bar: has the nice curves of a track bar but not such an immediate and drastic drop so I'm holding the bars on top right next to the stem. Here's a couple I've found that have grabbed my interest:
Deda Elementi Pista handlebar | Retrogression seems like there might not be enough room on top? Gran Compe Drop Bar ? Factory Five these caught my eye but i'm not familiar with gran compe plus doesn't look like it's a 31.7 clamp Deda Elementi Newton 31.7 Deep Drop Bar > Components > Handlebars and Stems > Drop Handlebars | Jenson USA or Deda Elementi Newton 31.7 Shallow Bar > Components > Handlebars and Stems > Drop Handlebars | Jenson USA nice but expensive That's really about all I've found that's close to what I'm looking for, Scrod do you have any suggestions? |
Originally Posted by BiceclettaLover
(Post 17204095)
Hey Scrod Love what your'e doing at retrogression Grade site. My question regards the All city thunderdome. I am around six three and a half do you think that the 58cm Thunderdome is to small for me
|
Originally Posted by Traifster
(Post 17204422)
So I'm looking for some drop bars to replace the risers on my Iro Mark V. I want a drop bar that's somewhere between a track and a road bar: has the nice curves of a track bar but not such an immediate and drastic drop so I'm holding the bars on top right next to the stem. Here's a couple I've found that have grabbed my interest:
Deda Elementi Pista handlebar | Retrogression seems like there might not be enough room on top? Gran Compe Drop Bar ? Factory Five these caught my eye but i'm not familiar with gran compe plus doesn't look like it's a 31.7 clamp Deda Elementi Newton 31.7 Deep Drop Bar > Components > Handlebars and Stems > Drop Handlebars | Jenson USA or Deda Elementi Newton 31.7 Shallow Bar > Components > Handlebars and Stems > Drop Handlebars | Jenson USA nice but expensive That's really about all I've found that's close to what I'm looking for, Scrod do you have any suggestions? |
Hey Scrod, I'm new to these parts and I don't know where else to find an answer to these questions.
Under every username there's a space for Mentioned Post(s) and one for Tagged Thread(s). What do these designations mean? |
Look at the my profile page and click the 'mentions' and 'thread tags' tabs for examples.
When someone does this - @Route 66 - you'll get a notification and it will show up on your profile. It's a good feature if you don't visit the site very often and someone replies to something you said that may have gotten buried but not many people utilize it. |
Thanks, I (kind of) get it now. :thumb:
|
I have to say, under Scrod's crusty exterior he must be a nice guy, cause this is one of the most helpful threads on the interwebz. Kudos.
|
scrod is a magestic hunk of manmeat.
|
1970s FUJI INTERMEDIATE TRACK BIKE
any thoughts on this frame ? i've been looking for a lugged steel track frame. unless this frame is very intro level the price almost seems a little too good to be true |
If it fits you, buy it. Now.
|
^please do and post pics.
|
Scrod, I 'm looking to purchase the SRAM S300 crankset with GXP BB from Retro-gression and wanted to make sure that I have the proper tools to install the GXP BB. Will the standard BBT-22 from Park Tool install this ok, or do I need to be looking at something else?
|
You'll need the Park BB-19 or BB-19.2
|
http://i.imgur.com/MZifJGH.jpg
What could possibly have driven someone to display that font so prominently on the down-tube? |
I have no idea but I hate it. It reminds me of professional wrestling.
|
The worst part is it looks like they're using it on the other color-way being released this year.
The only picture I could find was a weird shot on Cinelli's website (in the gallery for the caleido). But I saw the font. God, that font... http://sharetv.com/images/leverage-show.jpg |
Hey,Scrod what is your opinion on the new 2015 cinelli Histogram. I fall in love with every cinelli I see in person, but think they are overpriced. Is it worth the extra cash.
|
Regardless of my opinion, it's "worth" whatever people will pay to have it. Cinelli has decided that amount is $949. It being worth it to you depends on whether or not you'd pay that much.
Ask a cryptic question, get cryptic answers. |
has a 31.8 quill stem ever been made to your knowledge?
|
Originally Posted by Shotland
(Post 17213166)
has a 31.8 quill stem ever been made to your knowledge?
|
| All times are GMT -6. The time now is 06:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.