|
Originally Posted by mikemowbz
(Post 19128931)
I have one odd-man-out flat blade Campy skewer in my bin of scavenged bits at work.
Not sure if Record (looked at it for 30 seconds and tossed it in the bin several weeks ago and haven't inspected since), and there might be issues with condition - but I will try to remember to check for you when I'm in today to grab some tubes... |
Got down to cabling up the 84 High Sierra and discovered that I gave away my straddle cables to a buddy... when he was a buddy.
ISO 2 straddle cables for a set of Dia-Compe 980 canti brakes.they have the lead stoppers on both ends and are fairly long. Have I will try and fill that need, just let me know. Thanks all ! 3speedslow **notice** found the straddle cables. Turns out, I had the darn things all along. Must have given away some other set. |
ISO: Shimano BL-R400 left side brake lever in nice condition. These are the aero road brake lever that say only Shimano on the front levers in bold black.
|
Originally Posted by cyclotoine
(Post 19128979)
I guess it's just the territories that are so pricey. I shouldn't complain since we are subsidized by the south.
Just decided to pull the trigger and found out longest steerer is 140mm. of course... 350mm steerer 1" threadless is potentially useful. $20 1" threadless HS + $37 (shipped) fork on an old frame and suddenly I have use for the stash of 1" threadless stems. I reckon I'll grab one. |
|
Originally Posted by hatrack71
(Post 19130353)
ISO: Shimano BL-R400 left side brake lever in nice condition. These are the aero road brake lever that say only Shimano on the front levers in bold black.
Shimano Tiagra R400 Brake Levers | Chain Reaction Cycles |
Originally Posted by mikemowbz
(Post 19131088)
$13.49 USD from chainreaction in UK if no one here is holding...
Shimano Tiagra R400 Brake Levers | Chain Reaction Cycles Thank you for the link. This is perfect! |
Trade a 52cm Ironman frameset, hs/bb for a nice Brooks Professional in brown.
|
For my Lipstick on a Pig project, I'm looking for a long reach center pull brake for the front (drum brake S-A on the rear). I thought a MAFAC Racer would work, but once I got the new front wheel built and slapped into place, I discovered it's not quite long enough (max 75mm reach, while it looks like i need 80mm). Too much to just file the slot. I believe a MAFAC Raid will work, but they can get a bit pricey. I specifically don't want a modern side pull (e.g., Tektro), or one of the many iterations of the ugly, cheapo Schwinn Approved/Weinmann/Dia-Compe side pulls which were standard issue on these bikes. I'm hoping for something understated, with a little more class. Something a bike nut would notice with a casual glance and think, "nice upgrade." :) I've always gotten rid of Weinmann Vainqueurs, but maybe they will be what I settle on.
I've got stuff to trade, including three or four MAFAC Racer calipers in various states of assembly/completion/condition. |
Nitto bar trades?
Got an Albatross lying about? I have an excellent condition heat-treated Nitto moustache (26.0) that doesn't work for me. I'd like to try an Albatross. Kindly PM if you'd like to discuss, pics, etc. At this point in my life, I don't need more stuff, I just need different stuff. :)
Thanks! |
Originally Posted by smontanaro
(Post 19140517)
For my Lipstick on a Pig project, I'm looking for a long reach center pull brake for the front (drum brake S-A on the rear). I thought a MAFAC Racer would work, but once I got the new front wheel built and slapped into place, I discovered it's not quite long enough...
|
Looking for a Simplex FD appropriate to a '73-'74 PX-10. The original Super Competition has suffered Delrin failure.
I've got a Suntour FD mounted right now (Compe V?) that is probably superior to the OEM, but I'm being a bit persnickety on the rebuild. |
Originally Posted by CO_Hoya
(Post 19146918)
Looking for a Simplex FD appropriate to a '73-'74 PX-10. The original Super Competition has suffered Delrin failure.
I've got a Suntour FD mounted right now (Compe V?) that is probably superior to the OEM, but I'm being a bit persnickety on the rebuild. |
Originally Posted by cinco
(Post 19148537)
I have at least two homeless Super Competitions laying around and I also appear to be in your time zone. My want-list is enormous at the moment and spans several decades and several continents so I expect we can work something out.
Cheers! |
This is for a 1983-ish bike, as seen in this thread but mine was stripped and I'm coming up from just a frame and a crankset. The prior owner seems to have removed anything that didn't take special tools. Looking for...
Stuff for trade
|
http://i.ebayimg.com/images/i/401101...-1/s-l1000.jpg
I am looking for the screw and nut thing that would fix the derailleur claw I have to the dropout. Co-op was surprisingly devoid of this particular part. |
No idea if the ones I have are large pulley - what's the pulley diameter you're looking for? I have an unused set.
Originally Posted by Craigorock
(Post 18899240)
Attachment 530351
I am trying to find one (or two) of these Dia Compe large pulley-style brake cable yoke to complete my '84 Miyata 610. I am looking for this model specifically, as I know there are other options available (like the Herse ones from Compass, and Gran Compe ones from Velo Orange) but I really want this larger wheel ones as I find they work alot better than the smaller wheel ones. I am too far from the city, and there is no used bicycle shops or co-ops around with stacks of parts bins to rummage through for hours in hopes of finding a little gem like this for a song. Help me Bike Forums! I only have one and its in rough shape, but still works fine. I would be interested in just one or a pair, in used but usable (or better) condition, with OR without the cable fixing bolt and acorn nut (those are easy to find). I have a good collection of small parts in my bin and I am also open to trades for something of equal value that can help you out like this little piece would help me out. Let me know! |
WTS/WTT 1984 Trek 720 (21")
Hi all,
I am looking to sell or trade my 1984 Trek 720 in nearly mint condition. It is a 21". Sadly it is too small for me. I am looking for a commuting bike. Vintage Trek (hopefully a 720 or 520 in 22.5") or a newer Salsa, Surly, or similar. I am near Atlanta. PM me if you have something and are interested in trading or if you are interested in buying. |
ISO
Interested in an 80mm Nitto Young or normal length (not the long one) Technomic stem for 25.4 Nitto 135 bars. This is the last piece for my Panasonic Mountain Cat drop bar conversion. Thanks. |
Originally Posted by msl109
(Post 19158386)
No idea if the ones I have are large pulley - what's the pulley diameter you're looking for? I have an unused set.
|
Originally Posted by Pemetic2006
(Post 19163009)
ISO
Interested in an 80mm Nitto Young or normal length (not the long one) Technomic stem for 25.4 Nitto 135 bars. This is the last piece for my Panasonic Mountain Cat drop bar conversion. Thanks. |
Originally Posted by nlerner
(Post 19163350)
I have a 90mm Nitto Young in need of a good polishing if that will do. Let me know.
|
Originally Posted by sloar
(Post 19139380)
Trade a 52cm Ironman frameset, hs/bb for a nice Brooks Professional in brown.
|
Originally Posted by TimmyT
(Post 19163827)
Add 10cm to the frame, and I've got a Brooks Pro for you.
|
Why weld when you can just use screws?
Seriously, [MENTION=139746]sloar[/MENTION] if you have something in the 60-62cm range that's equivalent, I'm willing to trade, not that I don't have enough frames already. |
| All times are GMT -6. The time now is 03:04 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.