ISO Brakes (at least a front one) that are not recessed nutted for my Technium 460. I'm using 700c wheels so they'll have to be a longer reach. I thought i had some but can't find them.

ISO Shimano HP 7600 track headset
 

Looking for good condition one for a fork that won't take much more stack height. Anyone have one to let go reasonably? 26.4 race

ISO Shimano 600 Pedals
 

ISO Shimano 600 pedals (the version prior to 600 tri-color). I have a like new tri-color set I could trade, or lots of other trade material (Campy or Shimano).

Have:

Shimano Dura Ace 7800 STI (shifter/brakes) front and rear with red hoods;

Shimano Dura Ace RD 7800

Shimano Dura Ace FD 7800

Shimano Dura Ace crankset 7400 53-39 kinda long, 180mm (TRADED)

Shimano Dura Ace FD 7400

Shimano Dura Ace Downtube shifters 7400 (MISSING PARTS)

Shimano Dura Ace 7800 front and rear breaks (no pads)





Looking for:

11 spd. Rear wheel compatible with 2016 Shimano 105 groupset;

Single speed wheelset;

Shimano Santé groupset;

Shimano 105 Golden Arrow groupset;

Downtube shifters with matching FD and RD;

Anything from Brooks England in black, antique brown or cambium;

Portable bike repair stand;

Anything Titanium;

New 700c tires (23 all the way to chubby 30s);

Single speed crankset; (GOT IT)

Single speed chain tensioner; (GOT IT)

Flat bar road bike brake levers; (GOT THEM)

High quality clipped pedals (shimano or Campi);

ISO: Nitto (or similar?) 2-bolt seatpost. The original SR Laprade on my '84 Trek 520 doesn't have fine enough adjustment for me to get my saddle tilt 100% nailed down.

Weird! Got a reply notification, but don't see the post now. To answer the question, I believe it's 27.2 (according to Sheldon Brown, vintage-trek.com & various forum posts).

I have what appears to be a 62cm 1987 Centurion Ironman Master frame and fork that has been spray painted black. It has all the characteristics of this model and year, and the paint overspray inside the head tube is yellow and white, matching the Ironman Master color for that year. You can see some discussion about the ID and serial number here:

http://www.bikeforums.net/classic-vi...l#post19082652

Other than the paint it's in good shape, with only a small dent in a seat stay.

It's just a bit bigger than I'd prefer (~60.5cm seat tube c-c). I'd be willing to trade for a similar 58cm steel frame.

Sorry, no 58s around. I actually only have two framesets at this point. I've sold, traded, or given the rest away.

Needing a quality stem. 80 mm
 

Hi, getting back to bike project. Anyone have a nice stem for a 26 bar with about 60mm above the min. Insertion line?
I have Campagnolo Record hub parts. Suntour Winner Pro freewheel and sprockets shims etc. Suntour tools. Misc goodies.
Thanks.

ISO:

2 Suntour bridge cable carriers with pristine hardware

ISO Swiss threaded bottom bracket
 

Needed to go on a 1965 Schwinn Paramount. (I know, strange that it has Swiss threading, but there you are.) I prefer either Stronglight or Campy, and would settle for a right side Campy part as I have the rest.

Thanks

ISO: used Shimano or SRAM 8 speed cassette in any of the following sizes:

12-21
12-23
12-25
12-28

Thanks!

If you haven't found one yet, Niagara sells 'em:

Sunlite Derailleur Bracket Bolt/Nut Small Only

I picked this Cyclone up at a swap meet. I unfortunetly didnt notice it was missing the cable pinch bolt. Anyone have a pinch bolt/and or a entire Cyclon MK-II RD they'd be willing to sell?

http://i1126.photobucket.com/albums/...e.jpg~original

ISO:

Two French bottom bracket lockrings.

I have a Japanese fixed cup, have to check the details, but it's a good quality Swiss fixed cup.

Are you sure your bike is a Paramount? Not a repainted Allegro? They look similar, and came with Swiss bb.

John, I likely have a steel, straight-pin post in that size. It's fairly short, though. Let me know if that will do.

Neal. Thanks, and I appreciate the offer. Rudi may have just the ticket. I'll post back here, or send you a PM - depending on how it goes.

ISO: Shimano 2x9 speed STI shifters
 

Would prefer Ultegra level. Looking for a set that will work with my Shimano 6200 group to go on my Ironman. Everything on fleabay is beat to hell and overpriced. Unfortunately I don't have much trading fodder.

[MENTION=337426]attylah[/MENTION]: Would my Dura Ace 7800 STI listed above work for you? It is 2x10, but I am in need of cash to buy other components. I would let it go for cheap.

So far I can't find an answer to the compatability question. Does anyone know? Will Dura Ace 7800 2x10 brifters work with a 2x9 600SIS drivetrain?

I've never heard of 600SIS. What is it?

Yes, those shifters will correctly index shift that RD and will do it over an entire 10 speed cassette. Have done it with 7800 down tube shifters, which pull the same cable per click as STI's.