Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Road Cycling (https://www.bikeforums.net/road-cycling/)
-   -   Hot r Not (https://www.bikeforums.net/road-cycling/452315-hot-r-not.html)

Rob13 07-09-12 05:15 PM


Originally Posted by LowCel (Post 14459197)
NOT mine but holy crap!!! (belongs to JanneK from slowtwitch)

http://farm9.staticflickr.com/8142/7...7fcfa009_z.jpg
http://farm9.staticflickr.com/8168/7...98dec681_z.jpg

Frame: Cervelo P4
Bar: 3t Ventus Aerobar
Back wheel: Lighweight Disk
Front wheel: Hed Stinger fr9
Sifters: Zipp R2c
Saddle: SDM Adamo Prologue
Gears: Dura-ace
Cranks: Rotor 3dtt
Chainrings: Qrings
Chain: KMC XLS
Cables: Nokon
Tires: Vittoria Corsa Evo

Too much going on, NOT!

ravenmore 07-09-12 05:21 PM


Originally Posted by psuaero (Post 14459052)
First submission... got the bike last fall but just got the wheels last week. I think I still need white bar tape but other than that and maybe losing a spacer or two it's about done. That is until I save up enough money for Di2. ;-)

2011 TCR Advanced w/ 58mm November carbon clinchers

http://johnkimnagy.smugmug.com/Other...5smaller-L.jpg

I'm on the fence about this one. It is a fantastic riding bike no doubt - much better than my own, but the Specialized/Giant crowd has been here so often that it takes something truly extraordinary to get a 'hot' out of me. Canondale is in the same boat.

WHOOOSSHHH... 07-09-12 05:47 PM


Originally Posted by lowcel (Post 14459197)
not mine but holy crap!!! (belongs to jannek from slowtwitch)

http://farm9.staticflickr.com/8142/7...7fcfa009_z.jpg
http://farm9.staticflickr.com/8168/7...98dec681_z.jpg

frame: Cervelo p4
bar: 3t ventus aerobar
back wheel: Lighweight disk
front wheel: Hed stinger fr9
sifters: Zipp r2c
saddle: Sdm adamo prologue
gears: Dura-ace
cranks: Rotor 3dtt
chainrings: Qrings
chain: Kmc xls
cables: Nokon
tires: Vittoria corsa evo

super hot!

WHOOOSSHHH... 07-09-12 05:49 PM


Originally Posted by psuaero (Post 14459052)
First submission... got the bike last fall but just got the wheels last week. I think I still need white bar tape but other than that and maybe losing a spacer or two it's about done. That is until I save up enough money for Di2. ;-)

2011 TCR Advanced w/ 58mm November carbon clinchers

http://johnkimnagy.smugmug.com/Other...5smaller-L.jpg

Nice bike!

psuaero 07-09-12 07:34 PM

The saddle is a cheap white saddle that came with my CX bike. It's surprisingly comfortable on longer rides. I usually ride a SLR-shaped saddle and would love a Kit Carbonio (white or black). The bike came with a silver/white Fizik Arione but the shape just doesn't work as well for me as an SLR.

coppercook62 07-09-12 07:51 PM

http://farm9.staticflickr.com/8142/7...7fcfa009_z.jpg
http://farm9.staticflickr.com/8168/7...98dec681_z.jpg

Smokin

manutd 07-09-12 09:05 PM

That Cervelo P4 is amazing.....even looking at it hurts my wallet. Thats a major investment

c0lnago 07-09-12 10:51 PM

Lightweight rear...boom goes the dynomite!

thirdgenbird 07-09-12 11:12 PM


Originally Posted by c0lnago (Post 14460483)
Lightweight rear...boom goes the dynomite!

That is really the only part I find extremely eye pleasing. Don't get me wrong, it is extremely nice and a good looking bike, but are much better looking tt frames and front wheels. If it didn't have the lightweight it would be just another high end tt/tri bike. I would rather see the wheel matched with a LW front and mounted in an older bianchi d2 carbon.

jbchybridrider 07-10-12 12:46 AM


Originally Posted by psuaero (Post 14459052)
first submission... Got the bike last fall but just got the wheels last week. I think i still need white bar tape but other than that and maybe losing a spacer or two it's about done. That is until i save up enough money for di2. ;-)

2011 tcr advanced w/ 58mm november carbon clinchers

http://johnkimnagy.smugmug.com/other...5smaller-l.jpg

hot !


Originally Posted by lowcel (Post 14459197)
not mine but holy crap!!! (belongs to jannek from slowtwitch)

http://farm9.staticflickr.com/8142/7...7fcfa009_z.jpg
http://farm9.staticflickr.com/8168/7...98dec681_z.jpg

frame: Cervelo p4
bar: 3t ventus aerobar
back wheel: Lighweight disk
front wheel: Hed stinger fr9
sifters: Zipp r2c
saddle: Sdm adamo prologue
gears: Dura-ace
cranks: Rotor 3dtt
chainrings: Qrings
chain: Kmc xls
cables: Nokon
tires: Vittoria corsa evo

and hotter !!

oxfordd30 07-10-12 02:48 AM


Originally Posted by mazdaspeed (Post 14429043)
I think the old beast looks fairly decent these days, what do you think?

http://i13.photobucket.com/albums/a2...012nashbar.jpg

Hot.

Frame is perfect size for me. Actually, this looks like a Nashbar 6061 aluminum alloy double butted 60CM frame. It is quite light for a aluminum bike and cheap; only $99 (cost me $130 shipped to Korea). The one I posted is just like it. You also have the same seat post which due to the setback design gives you more room if you have a long upper body.

I'm guessing you are 6' to 6'3" tall, although leg length matters more. If so this bike would fit you perfectly.

If you have legs as long as mine or longer, the seat is a little low for you though.

Interesting drivetrain, campy maybe? I never owned those so I'm just guessing; others would be able to identify that. Mine has Shimano 105; bottom of the line for racing but for me it suits the street just fine.

errorunknown 07-11-12 03:09 AM

My new babe sans pedals, sorry for the crooked cranks, this was taken fresh out of the box without adjustments! Will have a new pic up with lowered stem, removed reflectors and stickers, etc.

http://i.imgur.com/FnQdB.jpg

Menel 07-11-12 06:33 AM


Originally Posted by incredibleting (Post 14454933)
http://i.imgur.com/PLS0Q.png

Got new tires and a new stem.

Massively huge potential. Tires ruin it, get some 4000S/PRO4.


Originally Posted by SpinDr (Post 14457766)
I don't have anything to lose. So here goes...

http://i27.photobucket.com/albums/c1...9/IMGP0013.jpg

Not.

Setback seatpost, slammed forward saddle?
Mismatched tires?
Wonky handlebar/shifter position?


Originally Posted by psuaero (Post 14459052)
First submission... got the bike last fall but just got the wheels last week. I think I still need white bar tape but other than that and maybe losing a spacer or two it's about done. That is until I save up enough money for Di2. ;-)

2011 TCR Advanced w/ 58mm November carbon clinchers

http://johnkimnagy.smugmug.com/Other...5smaller-L.jpg

Get a new black saddle.


[HR][/HR]
My re-submisssion, update to: http://www.bikeforums.net/showthread...1#post14265307

Count: 24 Activities
Distance: 976.70 mi

Helix finally neatened up and dialed in.
https://lh3.googleusercontent.com/-j...0F26507843.JPG

Cowboy905 07-11-12 07:09 AM

1 Attachment(s)
pardon the garage, was the only semi-white i could find.

and yes yes, i know i'm on the small chain ring.

http://bikeforums.net/attachment.php...hmentid=260887

SpinDr 07-11-12 01:18 PM


Originally Posted by Menel (Post 14465953)
Not.

Setback seatpost, slammed forward saddle?
Mismatched tires?
Wonky handlebar/shifter position?

1. The saddle is mounted bang in the centre of the rail limit marks.
2. They're the next items swapped out, when they're worn.
3. I have rotated them slightly since taking the photo, but there is also some optical illusion whatnot going on here as well.

http://i27.photobucket.com/albums/c1...9/IMAG0366.jpg

DropDeadFred 07-11-12 01:20 PM


Originally Posted by Menel (Post 14465953)
Massively huge potential. Tires ruin it, get some 4000S/PRO4.

Not.

Setback seatpost, slammed forward saddle?
Mismatched tires?
Wonky handlebar/shifter position?

Get a new black saddle.


[HR][/HR]
My re-submisssion, update to: http://www.bikeforums.net/showthread...1#post14265307

Count: 24 Activities
Distance: 976.70 mi

Helix finally neatened up and dialed in.
https://lh3.googleusercontent.com/-j...0F26507843.JPG

are you located in Columbus? I'm wondering if I've seen this bike at my LBS

Menel 07-11-12 02:08 PM


Originally Posted by DropDeadFred (Post 14467904)
are you located in Columbus? I'm wondering if I've seen this bike at my LBS

Nope. Atlanta/Decatur.

DropDeadFred 07-11-12 02:22 PM


Originally Posted by Menel (Post 14468202)
Nope. Atlanta/Decatur.

gotchya

Yaniel 07-11-12 03:35 PM


Originally Posted by Menel (Post 14465953)

[HR][/HR]
My re-submisssion, update to: http://www.bikeforums.net/showthread...1#post14265307

Count: 24 Activities
Distance: 976.70 mi

Helix finally neatened up and dialed in.
https://lh3.googleusercontent.com/-j...0F26507843.JPG

HOT! My next bike, in 3+ years after grad school and hopefully finding a good paying job, will be a Ti bike. And with some luck and willpower it will be my last bike with hundreds of stories to tell. Either a Lynskey, or a Moot. I love them.

canyoneagle 07-11-12 04:06 PM


Originally Posted by Menel (Post 14465953)
Helix finally neatened up and dialed in.
https://lh3.googleusercontent.com/-j...0F26507843.JPG


Hot!
This is the first time I've seen a new Ultegra crank that has not repulsed me (they are more tolerable in black).
Sharp bike!!!!!!!

LowCel 07-11-12 07:11 PM

Just the frame but I think it's a start. :D

http://i18.photobucket.com/albums/b1.../bikes/005.jpg
http://i18.photobucket.com/albums/b1...s/IMG_1359.jpg

thirdgenbird 07-11-12 07:17 PM

Hot frame and stand. I need to grab one of those (the stand)

KoolAidnPizza 07-11-12 08:02 PM

LC- why the uneven finish? still great looking frame, jealous as ever :)

Yaniel 07-11-12 08:05 PM


Originally Posted by KoolAidnPizza (Post 14469588)
LC- why the uneven finish? still great looking frame, jealous as ever :)

Thats the carbon weave.


HOT even though these are now the ubiquitous TT bike around here.

KoolAidnPizza 07-11-12 08:22 PM


Originally Posted by Yaniel (Post 14469602)
Thats the carbon weave.


HOT even though these are now the ubiquitous TT bike around here.

Ahhh i see. that would explain that. Thanks sir.


All times are GMT -6. The time now is 11:25 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.