|
Originally Posted by Squirrelli
(Post 14187504)
Here ya go.
|
Originally Posted by Muffin Man
(Post 14179292)
If i have 2 stripped nipples on my driveside of my rear wheel on my roadie, what are my options? I am hoping to replace the nipples myself, and just taking it to the lbs to tension, true and dish the wheels. My wheel is legitamitly out of dish by an entire cm right now
|
Get a vice grip and just go at it.
|
scrod, how many more miles will I ride until the zombie apocalypse?
|
Remove tire, tube, and rim tape. Unscrew nipple with appropriately sized flathead screwdriver.
/notscrod |
Originally Posted by ben4345
(Post 14187596)
scrod, how many more miles will I ride until the zombie apocalypse?
I must prepare! |
Originally Posted by striknein
(Post 14187664)
Remove tire, tube, and rim tape. Unscrew nipple with appropriately sized flathead screwdriver.
/notscrod |
ok thanx. I'll work on that after ap tests :(
|
Hey Scrod,
This might be borderline RG thread so if I should ask in RG let me know. I'm curious about the Cane Creek 110 headset. That 110 year NQA warranty is appealing to me. Is the performance/durability worth the cost? I don't mind shelling out now if I'll have to replace an FSA Orbit or Technoglide 5-10 years down the road. How long does a headset like the Orbit X typically last with moderate use? Thanks. |
I've never had any trouble with the Orbit-X and think it's an amazing headset for the money. I've only had my Cane Creek 110 headset for about a week on my BK so I can't really comment on how it's going to hold up but it's design seems to be pretty damn good and you can't beat that warranty.
|
Originally Posted by Muffin Man
(Post 14187574)
Halp
Originally Posted by striknein
(Post 14187664)
Remove tire, tube, and rim tape. Unscrew nipple with appropriately sized flathead screwdriver.
Thanks Derek. |
Originally Posted by ben4345
(Post 14187596)
scrod, how many more miles will I ride until the zombie apocalypse?
I hope you're prepared. |
Originally Posted by Muffin Man
(Post 14187860)
ok thanx. I'll work on that after ap tests :(
Scrod, how do I die. |
Originally Posted by Sherblock
(Post 14189438)
Scrod, how do I die.
|
I have calc and apush :( not excited
|
Originally Posted by Scrodzilla
(Post 14189440)
Ride four miles. You won't survive the zombie apocalypse on that conversion.
|
Originally Posted by Sherblock
(Post 14189532)
what sw8 fixie frame would you recommend? I was thinking a chinelli MASH but my parents said it was to expensive.
|
how do u guys get ur parents to buy u bikes?
|
Originally Posted by Sherblock
(Post 14189554)
how do u guys get ur parents to buy u bikes?
|
Originally Posted by Squirrelli
(Post 14187681)
This can be done if there isn't enough tension on the spoke, otherwise you will strip the slot on the nipple.
Problems may arise if spokes are a little long, ie poking up a bit into slot. |
Originally Posted by Scrodzilla
(Post 14189433)
This.
Thanks Derek.
Originally Posted by LesterOfPuppets
(Post 14189603)
Proper size screwdriver should be no problem unless spoke is kinda seized. Spokes take a kinda fatty screwdriver.
Problems may arise if spokes are a little long, ie poking up a bit into slot. I always have to deal with the wheels that come through the donation box and a lot of them have stubborn spokes that stick out. |
Originally Posted by Sherblock
(Post 14189554)
how do u guys get ur parents to buy u bikes?
|
what size are the tires you got on your bareknuckle?
|
23
|
How does the ride feel with 23c's? I wanna try out the 23 rim 23 tire thing but I feel like the ride would be too harsh. Right now I'm on 25's.
|
| All times are GMT -6. The time now is 01:01 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.