- Fork question
- New steel
- where can I find small diameter chrome tubing? (for racks)
- First Time Lugged Frame Build Problems
- Advice needed on disc-proofing a Seven Axiom build
- Titanium bottom bracket replacement...specifically Merlin funky BB
- Marnati in Minnesota
- Vintage Frame - Conversion to Internal DI2
- Best Steel Tubing for Brazing ?
- Custom Frame advice
- Some frame repair advice needed
- looking for a certain style top tube cable guide
- Adding Disc Brake Tabs to Road Frame
- What tubeset for a heavy rider? Road bike!
- can this frame be fixed ?
- Question about front center/fork rake...
- True Temper OS2 vs OX Platinum
- needs some help with a small frame
- Tig torch choices
- Building My First Frame
- Tom Palermo.
- Lug Thinning?
- is it OK to post a paint question here
- Sr Litage frame needs down tube shifter boss help
- Rear dropouts too wide now
- My first bamboo frame from Le Cheylard, France
- Bamboo Mk2
- How does one request a quote for a custom frame?
- Does moving the rear axle in the cutouts change the chain stay length
- Will heating a Reynolds 653 frame to remove a stuck seatpost affect the tubing?
- Retro fitting Canti posts on Centerpull posts for Paul Racers?
- Thanks for your help
- potentially repaired steel frame
- Reynolds 520 tubing vs 6011 aluminum tubing
- Understanding trail
- Traditional Method of Free Hand Brazing
- Cable routing for IGH
- What type of carbon?
- Removing braze-on fittings
- Paint over powder coat
- Brazing on head badge
- 126mm between dropouts..possible to fit 7 or 8 speed.
- Easy tabbed dummy axle
- Tig welded frame: Seat tube to bottom bracket
- tig welding os tubing
- Lug fitment, how much gap is too much?
- Mass Manufacturing
- Retofitting question...
- Geometry calculator online
- Video about FTW
- Front disc mount placement??
- 3 part vid frame build series
- accounting for moisture drainage-- what's a frame builder's take?
- Fitting 28x20 oval blades to 28x19 fork crown
- Trek carbon fix help
- Sourcing a Lightweight Steel Frame
- Hi-ten to cro-mo fork swap
- Cheap Frames at Overstock
- Getting fit for a custom built frame
- Fixed Gear Collapsable Bike
- Brazing lugs with flux coated silver rods?
- Moving Once Again
- Nervex lugs used on 1970s Motobecanes
- seat stay cracked at seat cluster - any options
- HELP IDENTIFY BUILDER. Lugged Frame w/Columbus Air tubeset.
- 700c wheels and S and S couplers
- BikeLugs.com Liquidation
- Whats your best technique for filing / smoothing fillet brazed welds.
- Question on Painting!
- Richard Sachs framebuilding kits
- Colored lugs on Bamboo
- Name Question
- Tubing bender recommendation
- Braze on Water bottle inserts and reinforcements. Where to buy?
- Silver, Did I use it appropriately?
- Brazing/Dropout-Replacement in South Florida
- 3D printing - future game changer?
- Custom Builder Recommendation
- primer on Trek bonded aluminum
- which is better Ti?
- Seatstay repair on aluminium bike
- frame brazing start up costs... ugh
- Modifying the length of a steel frame
- Spotted in Richmond, Virginia this weekend
- My Custom Titanium Bike
- 3XXX series aluminum
- Frame Crack Question
- FS:Complete Framebuilding Setup-Vintage
- Too late? (chainstay vs bigger tire)
- New Phil Wood Hub has 222mm OLD rear spacing and 13 cog cassette
- Front derailleur tab position
- Grade of aluminum in VisionTech aero bars
- Is this a decent TIG setup?
- Bad idea to hire a welder?
- Can True Temper OX Plat tube sets be lugged?
- Twin top tubes for a mixte
- Un-Brazing
- brake seatstay mount on the backside instead of top?
- Peugeot Perthus 753 - cold sprung?
- Buying bamboo for bike building