- Looking for information on NorthStar bike computer
- ?suicide levers into tire irons
- Help with installing STI brifters on bar
- need wheel help (Shimano Road 7-speed)...
- lube for new pedals?
- Rear Derailleur will not fit on 9-speed cassette
- Bontrager rim cracks - glad I caught them
- Heat blowing out tubes?
- downtube shifter conversion brackets for STI levers
- 9speed chain on a 3/32 ss cog?
- Buying spokes
- Wheel build suggestions for 180LB rider
- chain 118+ links?
- can't downpedal from the right
- What to look for in a cadence meter?
- Carbon wheel damage
- Drivetrain Help (Please Help me...)
- Tried SS/FG forum and failed BMX freewheel Q
- 36H 26" rim 4X laced to large flange hub
- new front brake...
- Need some suggestions
- Braze On Front Derailer Hanger Soft Metal???
- trouble with rear derailleur
- Any companies make a cheap 1 1/8" threaded headset?
- possible rim sizes?
- Seat pin
- Moving Shimano cassette to new wheel?
- Stepdown ferrule
- Squeaky brakes
- Derailer Issue
- Rigging a generic CO2 cartridge
- Derailleur
- 4 bolt (104 BCD) chainring that is compatiable with a 10 speed chain??
- Crank Pullers
- Flat Bar road bike
- Seat Tube Clean Out?
- Sealed vs Unsealed (Headset)???
- Minor Ulpgrade Question
- Pulleys for '78 Nuovo Record RD
- What year did dropout spacing go from 126 to 130?
- rims/wheels and other advice needed
- Rear derailleur pulley 10T vs 11T
- Can't shift to Big Chainring
- Tiagra Hub, can cups be replaced?
- when should bottom brackets be replaced?
- Where to upgrade?
- Sugino 75 Crank Bolt Torque?? Grease or no?
- 126 mm to 135 mm
- Need tips on cold setting and converting 8mm dropout to 10mm
- route cable
- front tire constantly flat
- Constant Tire Blow-Outs
- Is it an issue of compatability? 7/8/9 Speed?
- Barnetts Manual?
- Cheap and good 135 mms disc hub?
- Mysterious O-Ring
- gripshift
- Fractured rear derailler Shimano RSX
- Help identify my creak!
- 32 vs 36 spokes
- Treading the thin line of stem safety.........
- Hybrid seat post suggestions
- help on technical problems
- Crank just spins?
- putting together a new drive train
- Seatpost rack on a carbon fiber seatpost
- Headset bearing races question
- 29" Spoke Tension
- Updating the dynamo lighting on an old roadster
- Anyone want to wrench in Nepal?
- Crankset & Front Derailleur Compatibility
- Can I use any 9 speed chain on any 9 speed cassette?
- Truing a Rolff Vector Pro wheel?
- Chain material choices?
- Spoke Protector - where to find one?
- Horizontal drop-outs prob
- F80X Knocking = Loose bushings, or normal
- wheels problem
- Megaexo cups...non-ds spinning poorly
- 7 spd friction shifters with 8 spd cassette.
- How do you determine fork length for 1" steerer diameter?
- spocalc in google docs?
- Rear Derailleur for Megarange
- hub compatibility
- Rhyno lite thump
- marzocchi888 rc2x???please helpp
- 130mm Frame Spacing vs 135mm rear hub?
- Crankset and Bottom Bracket Compatibility??
- Broken Sram chain - what now?
- Replacing front suspension fork prior to Road Accident
- marzachin mz bentt
- Help. My new cassette seems to small.
- Suzue hub measurements
- SRAM Force shifter with long cage derailleur?
- handle bars on an old puegeot
- Interchangable Wheelsets
- Need a new seat post
- rear wheel calibration
- Dent in handlebar - should I worry?
- crown race installation