- 7 speed shimano cassette on a shimano 9 speed hub please help
- Has anyone considered copy / pasting shelds entire site over to a cleaner blog / site
- Gears not engaging
- from twistshift to triggerswitch, now crankset wont engage all gears
- 3 speed 29er? advice 1x3 3x1 or internal?
- hand pumps, which ones are worth getting?
- Fit question
- Removing freehub from Forte Titan wheel?
- Need halp getttng my stem/bars off my frame...
- Drivetrain setup advice: Ultegra FD+RD with touring gears
- center pull brake adjustment on a 27 inch frame with 700c wheels
- 36-hole rims w/ 18 spokes
- Another Campy 11 Speed issue/question - chain / chainring noise.
- Nitto M12 rack w/Paul Comp cantis
- Is a torque wrench required to install BB?
- using Campy integrated shifters w/ V-brakes
- cant true wheel
- 26 X 2.1 tires on 26 X 1.50 rims?
- new wheels never uniform tension
- Koolstop install on Cantilever brakes - problems
- Schwinn Le Tour headset
- Spoke tension question
- Chain jumps off middle chainring
- Micro-Blowout, Tyvek to the rescue!
- Compatible?
- Finish Line Ceramic WET™ Lube?
- On Shimano XT brake housings there is a large TORX fitting on the side- does that..?
- direct pull brakes
- Removing rear derailleur without break chain... OK?
- Broken top tube cable guide
- basic question- front tire alignment
- Which Bicycle is this one ?please help
- Can someone tell what bike is this?
- Wheel weight
- Is this norma: rear derailleur question
- Parallel seated tandem bike
- Tube failure
- Replacing hybrid wheels with road wheels?
- best cassette 11/30, 11/32
- Bottom Bracket U/S.. GIANT Bike
- Bontrager Wheelset Problems Continue
- I think I broke my shifter?
- need lower gearing for shimano 10sp
- 2006 80mm Fox RLT Stanchion Length
- Brake combo, peace of mind.
- Rear Axle Overtightened
- Need advice on replacment for 1" threadless headset
- How to measure spoke length?
- Colnago Dream Plus RD hanger!
- Are Shimano Hollowtech I and II interchangeable?
- what do these paint crackles mean?
- what to do with this Colnago frame?
- cartridge headset match (or go with ball bearings)
- Road hubs without quick release mechanisms
- How to remove cartridge bearings from a headset?
- Issue with SRAM Red Crankset
- Sram Red Crankset Campatibility with 2008 Scott Addict R4
- Justfied to return Shimano pedals?
- reuniting self-extracting bolt and dust ring
- Heavy spot on new Shimano R500 front wheel.
- Nexus 3-speed; brake housing instead of SIS stuff?
- Valve extenders or 80mm valves?
- Help with Guerciotti bottom bracket
- Slightly Loose Cottered Crank Arm - Whats the easiest Remedy?
- MTB-Road parts interchangability
- Scratches on crank
- Installing SRAM caliper brakes
- Lots of Friction in Rear Brake Cable
- bb size
- older derailleur with newer shifters?
- chorus crank dust cap removal (Dust cap)
- Campy Chorus 11 chain noise/issues
- where to find derailleur hanger for this a 1997 Ross Bryce Canyon?
- What chain cleaner?
- Respacing Sturmey Archer AW Hub
- Crown race recommendations?
- Advice on reducing the diameter of a seatpost
- What is the rubber sleeve on Deore XT rear der?
- Missing one shift
- Replace Cogs / Crankset
- Tubular Mounting Question
- Anybody ever heard of a bianchi cesar?
- Surly seatpost clamp sucks -- Salsa lip-lock cured it.
- Break in Period for Noisy Drive Train?
- Frame Incorrectly Welded?
- got my torque wrenches to do it right. Now what?
- Women are better mechanics than men.
- Vintage/Classic Bianchi - Help me fix it or is it ruined?
- threaded Headset Removal? Also threads broken.
- Safe to ride?
- bar end shifter indexing problem
- When/why should I service cartridge bearing hubs?
- What is the ideal singlespeed chain tension?
- Mounting a rack on an extra-small frame
- SID WC Carbon Steerer, can't get that plug to stay.
- So you broke the split pin on your Shimano Deore hydraulic caliper...
- Rebuilding Joe Blow Pro pump
- Newbie wheel builder looking for help
- Hub spacing for Alfine hubs?
- 105 vs ultegra chainring