- new chain jumping under load
- slipping forward on bike seat
- What purpose does this serve under the gear cluster?
- Warped Single Piece Crank
- Difference between 559x18 and 26" MTB wheel?
- Rear Axle replacement
- swapping from 24 to 26 inch bikes....
- Is my frame toast?
- Schwinn "Frontier FS" grip shifters parts identification
- A HUGE THANKS to Sheldon Brown!
- Is there something wrong with these Shimano 105 STI shifters?
- 10sp crank set with a 9sp drive train?
- Torque Screwdriver, where to get?
- Tool Kit
- FC 7800 10 Speed compatability with 9 Speed?
- Rear gear change to smaller gear without my shifting
- Ultegra WH-6600 questions
- Cannondale CAAD4 - worth it?
- 9sp Ultegra Triple to 10sp Rival?
- Shimano FH-5600 hub dimensions?
- what to do when inner tube patch fails?
- Switching from 27" to 700mm - Please advise
- jtek query
- Brake discs are mostly interchangeable... right?
- Specialized rear derailleur hanger (replacem't)
- Coaster brakes and freewheels
- Rodi/Vuelta Wheels - cannot find reviews
- cantilever to Single D 7 question
- Shining-up old aluminum crankarms?
- Roubaix 07 Comp - Squeaks and Groans
- "flange distance & dish" vs. center-to-flange
- Sunrace
- cluster f_____
- shimano nexus 7 shifter
- 2008 Trek Madone question
- Acceptable chain tension
- Drop Bar Drill For Aero Brake Levers?
- Looking for Ksyrium axle
- Stripped Hex screw...
- I think my hub is bent-Chain is slack then goes taut WHEN COASTING.
- Wheelbuilding question 1st timer
- CX brake/shifter conundrum...
- basic headset question
- Creaking Steerer Tube
- Derailleur shims
- frame too small
- What tire widths will fit a 27x1" rim
- Feasibility of swapping frames?
- Crankset with integrated BB
- 9 speed shifters, 10 speed cassette?
- Hub and spoke salvage...?
- Mountain bike storage - disc brakes - hanging bike up
- Bent Axle? Shimano Deore LX hub
- Antisieze
- Threaded Carbon Forks...anything worthwhile out there?
- 8,9,10 Speed
- making it go quicker
- Low vs high pressure shock pump
- Back to Basics
- Wear on rear cassette...
- pedal problem (falling off)
- 126 OLD hubs and "speeds"
- Question about Cranks/Chain Rings
- replace rusted chain??
- Built my first wheel, have a question
- Repair book
- Chain Rub Sounds making me feel stupid
- Do you recognize this logo?
- Need help, RD Repair
- Powder Coating Woes!
- Rear rack on a '95 Fuji Team
- loose headset fixed cups
- Park Tool Stand PCS-9 - Issues assembling
- <b>Switching to Threadless </b>
- Old pedals still good after rethreading cranks?
- Stem upgrade
- Park Tool DAG-1
- What adjustment can I make to fix this problem ?
- The Real Thing: A List
- Another workstand question
- Compact Crank for 7 speed Shimano 105
- Campy Record brake lever QR pin is stuck.
- The Dreaded Double Shifting RD....
- Problem shifting to inner chainring when climbing
- Respacing a frame with dimpled chainstays?
- Replacing JIS 7EL adjustable cup bottom bracket
- Bought Ultimate Elite Pro Workstand/Questions
- Cottered Crank
- centurion fork removal
- Ultegra Rear Derailleur, New, Repair or Rebuilt?
- How to clean cassette/chainrings without washing away grease?
- good source for stainless bolts
- 2nd Failure Cannondale SI Hollowgram Crank
- Blasted French Threads!
- Replacement of Brake Pads
- Expander/Compressor plug for Chris King stem cap
- What maintenance is needed for a Trek 1500?
- Another Spoke Length Request
- Rear derailleur pulley rubing against cassette
- Roller bearing headset installation?