- Advice on Upgrading 1983 Trek 620 With New Components
- Shimano ultegra - shifting problem from largest (23) to 21
- Bent Frame !! HELP
- Cable actuated disc brakes, Spyre, HY/RD or BB7's???
- Looking for 180mm arms crankset for old Nishiki
- Will this front derailleur fit my bicycle?
- regarding brake reach
- Sourcing M6 Cantilever studs for 90s Cannondale
- Pedal thread size
- What is this?
- Buying a new rear wheel for my 24 and 1/2 inch mountain bike. Where should I start?
- Help with 9 speed 6500 cassette and Ksyrium SSC ( M10 hub, I believe)
- Quick release?
- Dual Suspension/Rear Suspension Bike to Portable Bike
- Repair Stand Head Recommendation?
- help with disc brakes adj and psi in fat bike
- hub and spoke questions
- Stem help
- What spokes in Fulcrum Red Wind?
- 2001 Giant Rincon SE Rebuild - Worth it?
- Straighten Rotor with 2 boards? an idea?
- Old components on new frame
- Wheel rim size...700 vs. 27
- Advice needed stiff cranks
- BB question
- wide range cassette or compact crank?
- Shimano Hollowtech tandem crankset removal
- SRAM 22 Drivetrain with Shimano 11 spd Cassette?
- Magura HS33 brake block compatibility.
- Shimano Nexus 4-Speed Hub - Blocking the Freewheeln
- Crisp shifting
- Shimming A Seatpost
- To resurrect an old Ultegra un-stretched chain
- Rim has begun to split at the seams; how soon will it split completely?
- changing 7S to 8Speeds on a 3S internal rear hub - I'm confused (as usual)
- Broken Helmet Clip... the female end. Looking for tips on how to replace...
- rusted spokes/freewheel
- how do you check air pressure w/presta valve?
- Iron Horse Axion XS
- Does metal rescue work? What about pitting?
- New Chain Skipping On Old Cassette, pic attached.
- Chain suck -best way to unwrap chain??
- survey halp
- How much can I expect to spend on a frame repair?
- Wheel swap question
- skipping advice
- Is my BB spindle too short?
- Need a new freehub for Neuvation M28
- Full Hex Key stuck in Allen bolt, cannot remove pedal from bike.
- blow innertube
- Tig welding a cracked seat tube - Does this look safe?
- Some Quill Dimension Confusion
- Ticking coming from freewheel or rear derailleur?
- Seat post too large, stuck; Frame ruined?
- Can you swap brake levers on older bikes?
- Frame crack or paint stress?
- noob needs help - tire size rim fitment
- Campy. 11 and Shimano 10 combination
- 1x8 Conversion & Bullhorns?
- Threaded Fork & Headset Installation
- Cannondale Beast of the East Fork Replacement
- Is this bad?
- What did I break?
- Deore Triple Front Crank + 9 speed DA Friction Bar End Shifter + Alivio "FC MC12" FD?
- Will an Ultegra rd work with a Sora shifter?
- Front Disc Brake Alignment questions
- Sram Power Loc link question.
- Shimano 105 chain "stock" master link?
- Check you Cambium faux rivets
- Need some wheel truing/dishing advice
- Question on studded snow tire care
- Bottom Bracket woes.....unbelievable!
- How do I tell if my wheels are aluminum or steel?
- Front wheel/forks - something loose.
- Campy & Shimano 11spd Cassettes... Interchangeable?
- 9t cassette availability
- cottered crank swap for square taper
- Bearing seals that will hold very light oil?
- Question about bearing retainers
- What parts do you never skimp on financially?
- I have a 1 1/8" stem but I have a 1" steerer tube what size shim do i need?
- chain dropping and adjustment
- organic cleaning solvents for maintenance and disposal
- How do I "reset" my front derailleur?
- De Rosa Factory Paint Process
- SHIMANO ST-A073 BLACK integrated brake/shifters
- brakes locking up wheels
- Is it the shifter or the derailleur spring?
- New deraulleurs???
- Frame Crack Question
- Rear tire rubbed spot on carbon frame - need some advice
- Shimano BB installation question
- Is there a Shimano "Shadow Plus" short cage MTB derailleur in a non-"Dyna-Sys" varie
- Bottom bracket question
- Microshift Thumb Shifters...
- Crank Arm Wobbling
- 11 Speed Compatibilty: Cassette Chain whip
- FD binding between cage and big cog
- Sram XT-4 overshooting gear
- Miaking aero bars fit?