View Full Version : Bicycle Mechanics
- DT Swiss Industry spokes?
- BB for FC-6750 (sealed cartridge)
- Mystery Crown Nut
- Wicking jersey
- Shimano 105 (5700) Trim Function...
- Is SRAM 1031 chain directional?
- MTB Seat Swapout
- Advice/insight needed about internally geared hubs
- Axle Question - Length Past Locknuts
- Flipping the stem on a Trek 7.3 FX
- Cutting steerer tube while it's installed?
- Initial/Preventative Maintenance on Newly Acquired Used Bike?
- Inner tube replacement - what did I do wrong?
- Sram S7 IGH ratchet / freewheel sounds after 4th gear
- Gotta get it together...seeee what's happening
- Mechanically ingenious (or idiotic) tips to share !!!!!
- Campagnolo Crank Conversion Double to Single
- Shimano 600 seatpost question
- Peddle clicks and tapping feeling on the bottom of my foot.
- Need help with early/mid 90ish Giant Rincon
- Quick question: 11/128 chain on 3/32 cog and ring (IGH w/ Hebie Chainglider)?
- Help adjusting indexing on Shimano 600 RD
- Bike Frames and parts
- Cantilever brake sticking on drive side
- Benefit of ceramic bearing bottom bracket and carbon fiber bars
- V-Brakes updating from Canti's
- I flipped my stem.....any cable adjustments to consider???
- XTR Tripple Shifter Compatability With Double
- Front Mech Annoying Adjustment Problems!
- Noise from the rear wheel, tear-down help needed
- Rim longevity with rim brakes? Ideal pad material?
- Road bike flat bar conversion - HELP!
- Chainring for SRAM S1220 (X-Glide)
- Old Shimano 600 upgrade or single speed conversion. (Vintage Motobecane)
- What kind of tool is required to remove this nut on rear wheel?
- Double to Triple Tarmac. It went too easy.
- removing reflector from threaded headset/quill stem
- Removing REALLY old rim cement?
- Reverse toe in stopped my brake squeal, why?
- removing rust from spokes without damaging anything?
- Bike Cleaning and Maintenance
- Real time: Reversing hydraulic levers, reusing olives/fittings?
- Noisy chain on cogs 14 and 19
- Trying to remove rear wheel
- Hydraulic brakes: leak from lever
- Shimano Dura-Ace/XTR CN-7701 Bike Chain 9 Speed Symmetrical or Asymmetrical?
- Disc Brakes?
- Surly ogre front fork on a Soma double cross
- Shimano Nexus-8 adapted for 120mm Track Drops
- Wheelset, will it work?
- Schwinn 10 speed shifting
- Replacing Components - Shimano Road Compatibility
- Generic (?) Bottom Bracket identification...
- Shimano Claris compatability
- [Tern Verge P20] Replace sprocket 11 with 9?
- TRP Spyre Bolt Question
- Brake pads to tight.
- Internal brakes without fork mounts?
- 700x37c tire on a 15mm inner rim width - SAFE?
- brushed up against some concrete
- Thoughts on the Sturmey Archer IGHs? Any Cheap wheels with them?
- front derailleur catching the cable on Planet-X with Ultegra 6800
- Ultegra 6500 shifting problem- won't utilize 3-click shift to largest cog
- Looking for a DA 3x9 sp left sti lever. or.......
- Not sure if I can mount bar-end shifter on bullhorns
- Axle is over 2/3 threaded?
- The bottom bracket cup from HELL! (removal help)
- Brake Pad Replacement - Common to Let Fluid Out First Time?
- Mysterious Crankshaft?
- Fiberfix: now, you can fix anything, including bicycles!
- Confusing problem installing cantilever brake calipers
- Properly adjusted derailleur hanger is wrong? Cervelo RS, Wheels Mfg #101, DAG-2
- Warping sprocket set
- Gates "Surefit" sprockets for belt drive bikes
- Another Shimano 105 (2013) Rear Derailleur Question
- crossing derailleur cables under the downtube - it's "wrong", correct?
- Rear derailleur mounting bolt rubbing rear cogs.
- Need to choose between Dura-Ace 7800 and Ultegra 6800
- Mtb front shifting
- Seeking advice for crimping brake cable ferrules
- Rear brake squeal
- Question about cantilever brake adjustment
- Bikehand Truing Stand
- What's in a bottom bracket?? (How important is it after the frame???)........
- Chain Falls Off Front Cog Pedal-Side When 5-Speed Freewheel on Small Cog
- Fisher RS-1
- Converting 9-speed flatbar Bianchi Axis to 8-speed dropbar. What am I overlooking?
- Threaded to threadless stem - rookie trying to convert!
- pedaling issue - shift like noise, skips, then catches
- Schwinn Continental BB conversion issue-65 mm shell width
- Pain & numbing in hands
- spokes unwinding and spoke prep question
- Bottom brackets and chain ring spacing
- Longer V-Brake Arms
- Help with levers
- Alternative Shimano brake oil - All the usuals have been discontinued
- What a difference a proper tool makes!
- Is my LBS incompetent?
- Clicking noise when peddling
- Help Building a Repair Stand Using Park Tool Clamp