View Full Version : Bicycle Mechanics
- Help With Rear Derailleur Selection
- Newb Question About Rear Wheel Quick Release
- New bike chain questions
- Suntour GPX downtube shifter no longer clicking
- Headset spacers on 1 inch threaded fork?
- spoke wrenches
- Torque wrench
- Spring-loaded bell unintentional ringing
- Specialized Aluminum Grades and Globe
- Chain issues
- Where to get JP Weigles or equivalent in france.
- 104mm BCD chainrings - does anyone have the skinny?
- Shimano Crankset Install
- Crank description says "50-Millimeter chain line" What does that refer to?
- Is this okay?
- Spoke replacement on Mavic Helium wheels
- Total Noob trying to remove Crank Arm
- Cup and cone bottom bracket overhaul
- Some penetrating oil got on my BB, what should I do?
- Hydraulic disc brake - change lever only
- Fix for cross chain rub starting in sixth gear?
- ratchet noise coming from rear cassette area
- Should sealed bearings leak?
- Handlebars?
- Rim Ridiculousness
- open hole in bottom of front fork?
- Mavic Ksyrium ES shimano 10 -> campy 11, spacer?
- How do you like to keep your tools stored or exsesible?
- refurbishing a dull scratched frame
- Front derailleur over shifting.
- placement of jtek shiftmate in another location not near the rear derailleur..
- Titanium spokes- BREAK???
- Shimano Deore Shift Indicator Cover Options
- What do I need to get?
- That annoying clicking sound (pedals/crankset)
- spoke wrench for Ksyrium elites
- Tool Question
- Longer Stem For Old Motobecane
- Cable Stretch
- Reconditioning/regrinding pitted cones?
- 105 10-sp jockey wheels squeaking
- I now appreciate spoke protectors aka dork discs
- Pedal holes in crank drilled out of square, crank recommendations?
- old XTR rear derailleur/new shifter compatibility?
- Endlessly dirty chain
- Bottom Bracket Compatibility
- Almost done with new bike..........down to stems and seeds
- New Ritchey C260 stem bolt rounded...cannot remove bars...
- the wonders of new housing and cable
- Ultegra 6510 Shifter Nameplate
- Homemade Bike Repair Stand
- 5700 brifters work with stock brakes & derailers on a Cross-Check?
- Using 68mm crankset on 73mm frame (British thread, late 90's)
- Anyone making a 10 speed 11-30 cassette?
- Pedaling is rough (clicking) on lower gears
- Stuck seat post
- New chain and cassette are skipping over bumps
- SRAM Red/Force rear derailleur won't stay on largest cog
- Help Needed: Rim Inspection w/ pics and video
- Need help picking out the right crankset so I don't order the wrong one... again. :(
- Auto Brake Cleaner as Bike Degreaser?
- Front gear swap question
- sram 7 speed
- Shimano tiagra/105/ultegra cassette compatibility
- Painting a 1984 Schwinn Le Tour
- Upgrading my Raleigh Port Townsend
- repair clear coat on carbon fork?
- Help: Unusual Blowout
- Shimano 105 Shifter won't shift front derailleur
- How narrow of a tire would fit
- 8 speed rsx shifter re-assemble
- 700x28 on 13 mm Rim?
- Derailleur cable tension & barrel adjusters
- Greetings from Boston! Any Uniglide peeps and/or fellow Dura Ace folks out there?
- Park Tools BT-2 Cable Stretcher
- Wheel build problem: every other spoke too long
- Discovered rear triangle in frame is off by 3/8ths an inch, what to do?
- Maillard Helicomatic cogs stuck
- crappy brakes: adjust or upgrade for 10%+ grade?
- So 16h hub on 24h rim possible, or am I out of luck?!
- Need help putting Shimano 600 friction shifters back together
- Kmc chain, shimano mech, SRAM cassette -- any issues?
- Replace Front Derailleur on 1990 Trek 1400
- use shrinkwrap on cable ends
- Crank Set for Bridgestone 1993 MB-4
- Seatpost for clyd
- Saving Metal in the Framehead
- First time installing a headset, need help.
- Replacing the Rim on a Tacoed Wheel
- Popping sound/feel on left pedal
- Brake/Shifter assembly comes loose....over and over
- chain length question
- Tire mileage estimate based on wear
- raising headset/handlebars??
- Backup-spokes 'containter'?
- Geared to Single Speed and Back Again
- rim strip, or, rim tape, recommendations sought
- Brakes and Crankshaft Questions
- Raleigh Richmond frame - Worth the effort?
- Rear Wheel Parts Recommendations Wanted