- Shimano Acera 8 speed compatible with a 9 speed SLX rear Cassette?
- What am I looking at?
- Indexing problems in upgraded 9-speed drivetrain
- Shifter problem - Shimano STX trigger-style shifter
- Upgrade cranks from 6650 to 6750
- Rigid fork for Stumpjumper
- Crankset upgrade-- Shimano Ultegra FC-6600 Crankset Oe
- Can't find source of slow leaks on both tyres
- Chainring compatibility
- DT Swiss / Soort Nude shock rebound screw stuck
- What is up with this chainstay?
- Modern canti suggestions for an older narrow fork...
- Chain falling from middle to small ring on 105 triple?
- Campy Record 10sp bearing replacement question
- Need help anyone knows about headset for giant atx elite???
- Any experience with "offset" q-factor
- Wheel dishing
- Spoke wrench for high volume wheel building
- Wheel building
- Park bench mount repair stands
- Loose brake lever (calliper brake, 1982 Hercules Commuter)
- Is any gel and handlebar tape better than the others?
- NOS shimano hubs are stiff
- Frame Alignment, Rear Twist
- Tire Burst...
- Problem with wheel/cassette
- Shifting issues
- New frame with current components
- 1993 Diamondback Sorrento Seatpost and handlebar diameters
- Can I swap out these tires?
- Need help with my front rim
- 130 vs 135 mm Rear Spacing & Wheel Strength
- Mass BSO assembly observations
- Cables under the bar tape- Stupid question
- Integrated Headset Woes
- 8-9-10 speed hub -> 7 speed cassette
- Tandem 48 spoke tension and Suzue Hub cones.
- Shimano brake cable vs other brand name
- Will a Bottom bracket "SM BB91-41" fit my ultegra 6800 crank?
- Share your experience with chain scrubbers
- Loose spoke, sign of trouble?
- 27" tire PSI limits
- Getting Started with a Wheel Build, Have some Questions.
- What bottom bracket tool do I need?
- Does this pump work on my bike?
- O/C rim for FRONT road disc wheel build? Worthwhile or not?
- XT Rear Derailieur is hesitating
- Shimano 105 derailleur with trigger shifters
- how bad is a dent frame?
- 7700 bb
- Another kids bike restoration question
- Cassette spinning when chaning down to low chain ring
- tubular glue job temp fix
- Paint chips?
- Wheel building tutorials for first timers - any recommendations?
- SRAM X4 left shifter slipping when shifting to largest chainring
- Simpleton's question on shifters
- Converting flip-flop single speed hub to 3-speed Freewheel?
- Rim size to fit a 37-622 (700c) tire
- WTF- I can't use Stans with Vittoria's new intergrated valve on their stem.
- Removing decals from a kid's 20" for painting?
- Need help reviving my bike
- FR4 Freewheel removal tool slightly too big?
- Mixing 8 and 9 speed components
- 5 speed hub - upgrades possible?
- Bulge on tyre near valve
- changing out saddle rails
- grindy headset on CAADX
- handlebars keep coming loose and twisting
- Thoughts on eggbeater reliability?
- Wheel Building question - Spoke lengths
- What's the rub?
- Stained San Marco
- Need BB help on a SS build
- GXP Track Crank not giving proper chainline
- Threaded Steerer Tube Washer/Spacers
- Chain with bushing for non derailleur system?
- what type of Al is used for wheels?
- GXP Bottom Bracket Question
- Replacing chainrings
- X7 rear derailleur shifter issues
- Cutting down a 1" threaded steel fork with a pipe cutter
- Murry mountain bike
- How close does the ERD of a rim have to match to use the same spokes?
- Time to replace the wheel?
- Cannondale M500 Brake Upgrade
- SRAM Yaw - backwards compatible much?
- Bike handlebars and brake lever fit
- FD adjustment when changing from tripple to double?
- New Bike - Pedals Off-Center
- Reynolds Shadow free hub disassembly
- Questioning Bottom Bracket installation
- Does an item like this (handlebar extension?) exist?
- Nuvinci N360 troubleshooting.
- Losing Gears on 3 Speed bike
- Repair in China
- Excessive cassette wear: Replacement recommendations?
- IRD CAFAM springs
- Great value RD - lotsa miles so far
- Removing hard anodising finish from Shimano XTR hub