- Finding Bike Parts
- Wheel building experts: need your opinion on spoke tensions from my first build
- How to undo sram crank bolt cap?
- Unusual shifting problem
- Very chatty bottom bracket
- Flat bar road bike. how would you do it?
- Chain Length
- Disc Brake Rub
- Puzzling Chain Problem When Shifting
- chain slips off of rear derailleur wheel
- headset part
- KMC Missing link orientation
- Checking tire pressure before ride (presta)
- FSA SL-K light mega-exo crankset with specialized OSBB frame possible?
- Third brake on a tourer
- Shimano ST-R700 - Can it be used as a normal reach brake lever?
- Another rim failure!!
- For sl-klight light cranket and mega exo bb with specialized roubaix Osbb?
- Seatpost Clamp/Collar Size
- Spoke Tension Asymmetrical Rim
- Leather Saddle Repair Shop? (Rivets on Lepper Voyager) Colorado hopefully?
- Left bike out in middle of storm for 2 hours..
- who could make a special part?
- Source for old models of Shimano brake lever hoods?
- Second wheel build
- Setting up a 1x7 drivetrain.
- Forks seem OK, wheel dish seems OK, but wheel not centered?
- puncture resistant tubes
- Road bike to hybrid...what's involved?
- 20" Shwalbe Marathon tire question
- Synapse Carbon build--bottom bracket question
- punctures. tire liners, help-info needed please.
- Wheel truing information needed
- Can't get non drive side crank arm back on..
- bike in accident, need help with repair
- Brake Arm Won't Spring Back.......
- Noise from Front End When Exceeding 20 mph
- DT shifters - Indexing using Shimano or Jagwire pods
- Bolt on brake solution ?
- New rear derailleur and chain - chain keeps skipping on 5 smaller cogs under load
- Broken crank arm bolt - What now?
- Fair price for local store assembling bike?
- Presta valves issue
- Least fuss replacement disk brakes
- Alternatives to Pedro's Chain Keeper?
- Permanent fix to prevent fender slipping?
- Suspension Fork to Rigid one (Suntour to Long Haul Trucker)
- One Chain w/Two Sets of Chainrings?
- Safety check for buying used bike
- Looking to permanently bond nut to axle: Which two-part epoxy?
- My 1st project bike. Bike Forums, I request the pleasure of your assistance.
- Shimano Positron II shift cable broke on my 10 speed schwinn, what do I do now?
- To build a set of wheels or buy them?
- Hello BikeForumers
- Replacing drop handlebars
- Rear Derailleur is hiting spokes in highest gear. Seems loose?
- Problems With V-Brakes
- how do you organize your workspace and tools?
- Bleeding Avid Elixir 1 disc brakes
- wheel building - first time
- Cleaning rubber seals?
- Cassette q: 9 or 10
- Conveting quill stem to threadless
- Cost to build a wheel? Have an IGH in a 26, would like it in a larger wheel.
- noob here need help
- Upgrade Claris to used Ultegra?
- What kind of BB is this and how do I adjust it?
- You might be OCD if .....
- Brand new chain
- Road Forks with Bigger Tyre Clearances; What Are The Options?
- Better degreaser, or replace bearings?
- Headset Spanner
- Brake Squeal
- Unusual cassette spacing question. Campy/Shimano/Suntour
- BB gap on non-drive side
- Invitation
- Need Huret tabbed washer for my Trek 620
- Tange headset with cartridge bearings or not
- any narrower kids bikes ( q factor )
- One way rear hub for Co-pilot weeride. Quality replacement?
- suntour power control thumb shifters
- Can someone show me this 3M reinforced strapping tape that can be used for rim tape?
- Shifting issues - replace cable first
- fitting a rear brake on fork
- Bike Worth Keeping?
- Help me diagnose a creak on my '85 Trek 720?
- Is it possible to true a carbon wheel with carbon spoke blades? (Spinergy Rev X)
- Trek 7.4 Linear Brake
- Hydraulic brakes leak
- alfine 11 question
- Rattling noise from the spokes
- Rebuilding Pedals
- Headset cups loose in top tube?
- To trust an untrue but stable wheel or not?
- Upgrade 5 speed freewheel in126mm dropouts to 6-7 speed
- Brake rub, needs truing?
- Alternative for 10x26 campy lock nuts?
- Motobecane crank fixing nut problem
- What size is an "XL"?
- Front shifter is stuck on wrong gear