- Crooked fork...?
- Chain line
- Cutting aluminum handlebars
- Nut will not budge!!!!
- BB30 and MegaEXO?
- Chain ring
- Ceramic jockey wheels! Quick one please!
- Necessary to remove tape goo from bars before installing new brake levers?
- Need help fixing campy brake
- 2008 LeMond Tourmalet Bottom Bracket?
- Extra Friction/Resistance On Drivetrain
- brake + tire combinations
- Which way up??
- Old verses New chains???
- BB thread type for a BMC and a Trek
- It hurts my eyes so much...!!
- Rim pinging while spinning
- rear derailleur for a 11-32 rear cassette
- Replacement cogs hg50
- Diagnose hypothetical extreme KOPS failure
- Clipless pedals: upward pull
- 130mm rear dropout - How much slack is removed when clamping down QR skewer
- Lost a plastic rear drop-out spacer on 80's Motobecane 10speed. Is it necessary?
- Do I go to the more expensive or less expensive bike shop for a fitting?
- 7900 shifters working until attached to rear derailleur
- Silly Noob Question: What are those metal clips on old brake pads for?
- Integrated Brake/Shifters Question
- How to know if the frame can still be used after a crash
- Inner tube & tire problem
- shimming a rear derailleur to make the cage wider? (8s chain with 9s RD)
- Thinking about converting fixie to 3 speed
- fixie flat keeps happening
- Rusted rim
- New BB30 Bearings
- Clunk or thunk noise from front end. noob here.
- flat tire
- Fuji S12S
- vintage shimano 105 brakes
- Chain not meshing with small sprocket (Shimano 105/Ultegra)
- thunk. thunk. thunk. thunk.
- Rear rim rubbing on brakes
- SRAM X-7 Shifter Woes
- Best value 11-34 cassette?
- 1985 Fuji Espree
- Crankset compatibility? (Full specs inside!)
- Removing grit/dust/lint from a chain without re-lubing
- Fast but easy-on-knees city bike?
- Question regarding Alfine 8, cogs, and chainrings...
- Front Derailleur Advice
- Setback Seatpost In 26.6mm?
- Sourcing an 8 speed FREEWHEEL
- squeecking noise in the front tire (may be hub)
- Lacing pattern for trailer wheels?
- want lower gears in a 81 le tour - change the chain ring or freewheel?
- replace drop bars with straight bars?
- Need advice for getting my bike back on the road after a crash....
- Trek Fitness 7.3 - Brake Reach
- Anybody else use this for finishing tape on bars
- 3T Funda fork dropouts
- shims shims
- A1 Enhanced Butted Aluminum
- Hub Moving On Axle
- Chain Replacement Time
- Normal sound of a transmission
- Too wide presta valve?
- Are all 1 1/8" threadless crown races the same shape?
- Let's build a rear wheel
- Broken Shimano xtr m900 shifter
- Trek 520 Lesson Learned
- troublesome 9S 105 RH Brifter - 2 levers stick, so won't click down
- Need help selecting new cassette (hill country roads)
- Crank Upgrade, Six-Speed
- Help with nuovo record brakes
- Upgrading from 8sp to 10sp questions
- Trek 3900 - question on brakes and seat
- I've been led astray - Shimano derailleur compatibility
- Motiv rear air shock PSI??
- How do I undo U-brakes?
- Guide-pulley Adjustment
- Plastic rim tape ... why?
- Bottom bracket info on KHS aero comp
- 8 speed road shifter replacement/parts compatibility?
- clicking noise ?
- I broke my favorite spoke wrench but I don't know who makes it?
- Front brake cable hanger for aero levers and cables?
- Problem with trek 1500.
- Hole in tyre sidewall...
- True or false : A headset is a headset is a headset.
- How Do I adjust Front Derailleur?
- Problem with blowing/ leaking tubes-- Strange Wheel/ Tire Sizes
- question about cogs
- Cheap solution for shifting a Shmano 3 speed internal geared hub with coaster brake
- Want to put drop handlebars on Next MTB
- Derailleur looks wrong and jams on back pedalling. Help a noob please!
- Sram XX1 crank in BB30 68mm
- Sub 600 gram front wheel build
- Headset cups taper before meeting head tube, leaving a gap.
- CAAD10 "clinking" sound from rear wheel [w/ video]
- Drop Bar Stem Conversion
- Different width caliper brakes?