View Full Version : Bicycle Mechanics
- Anyone selling used Park Tool kits?
- Good Alternative to Mavic Open Pro 36H
- Converting a headset
- Sun tour derailer
- Shimano 7850 Carbon C24 Wheels - Any difference with 2010 models?
- I need a BB spindle sanity check
- '70s Paris Sport Bottom Bracket size for fixed gear?
- Campagnolo ergo shifters question
- shimano 11T Pulleys in a campagnolo Record RD
- Campagnolo cable ends - were early 8-speed brifters designed for smaller ends?
- "Bicycle Hand" brand tools, anyone use this brand before?
- Cannot remove cups from shell (ashtabula)
- switching from flat bar to drops, with shimano components
- brake levers clamp too wide for handlebars, advice?
- figuring out BB spindle length
- Which Front (Triple) Derailleur
- front derailleur adjustment problem
- New (no-name) freewheel replacement, help
- $31.99 rear derailleur + grind & file = $100 or better rear derailleur
- Shimano Biopace 48 Tooth, 110 mm Chain Ring
- motobecane rebuild
- Panasonic Fork Replacement?
- ALERT! Shimano CN-6700 Chain and possibly CN-7900
- What I need for a good bench.
- avid juicy caliper bleed screw lost
- Campy cassette gears?
- presta adapter/shim on a schrader drilled rim?
- facing bb shell?
- chain line, hub spacing question
- Best Way to Remove Rust/Grime
- skewer on real wheel of single speed mtb?
- Park truing stand TS-2
- Are 2010 Ksyrium Equipes compatible with Shimano 8 spd. cassettes?
- Front Suspension Help
- Installing a CARBON wheelset on CAMPAGNOLO VELOCE
- Tires for special occasions?
- Biggest chainring, biggest sprocket?
- Spoke Length...have I figured them out correctly?
- MP3 ran out of batteries and was greeted with annoying sound. Trying to figure out
- Where can I get Gates Belt Drive components?
- Continental warranty
- No Chainstay Bridge for Mounting Rear Fender
- Any benefit std or long reach calipers
- aanyone ever mount a rear side pull brake on the front fork?
- Which particulate mask is recommended when working around carbon fiber dust
- mtb single speed chain tensioner that is really awesome.
- freewheel help!
- Shimano XT Front Derailleur (FD-773) and use with DA Bar End Shifters (SL-BS77)
- Dual-Pivot modification
- Tiagra 4400 front brake has new "play..."
- Do they still make "dummy" brake levers?
- 105 freehub sounds gritty, feels smooth
- Poor shifting on trainer
- Help! Is my integrated headset toast?
- Poor man's Rohloff. (picture heavy)
- Torque Wrench recommendations
- Master links...
- Pump rebuild
- Why can't I find the correct grip/twist shifter ????
- Brake adjustment and Derailer adjustments after both front and back wheel overhauls
- Help! B screw = stuck dead kaput.
- Removing spacer on MTB hub
- MTB rear hub on roady?
- calcium sulfonate greas
- 8 speed STI shifters to a 10 speed ultegra rear derailure
- The Adjustable Cup Is Going All The Way In?
- Shimano RapidFire Shifters - education needed
- Vertical dropout anti-rotation washers for Sturmey-Archer X-RK8 hub
- Annoying rear derailleur/hub chirp
- Freewheel seal loose
- Pedal hard from stop chain falls off front
- Do I need long reach brakes?
- chewed up hub flange
- tandem hubs?
- Triple shifter, double crank?
- Mark seat post for insertion
- Rebuilding MTB wheels. OK to reuse spokes? Source of inexpensive hubs?
- speedometer with poor calibration between trip and total Odometer
- Who still makes a fender punch tool?
- smallest cog? no way.
- Is this a good way to decide on the maximum dish a wheel should have!?
- Is there a Shimano XTR front cone which is 10X1mm through and through?
- Shifting RD both too loose AND too tight
- Front derailler adjustment
- Will Shimano Shifters work with SRAM rear Deraileur
- So frustrated--what is WRONG with this Campy shifting??
- Squished chainring teeth
- switching to down tube shifters
- Chris King Classic Cross Rear Hub Doesn't Fit
- Upgrading a hybrid with Shimano 105 set
- 700 wheels on a frame for 27's?
- Cost for Aligning Deraileur
- Ultegra 9 speed on 600 8 speed hub question.
- Bent fork, Head Tube, and Down tube
- Compact Crank
- Is this brake caliper nut long enough for carbon stays?
- cutting carbon steerer, never seen this "premium" fangled nut before
- Is it OK to change spoke patterns.
- Headset spacer as a shim washer?
- Headset won't stay tight