View Full Version : Bicycle Mechanics
- Can someone shed some light on my Super Le Tour 12.2?
- Brakes
- stuck gear
- New rims old pads
- A couple 8 speed 105 STI questions - 600 sis compatibility?
- Altus dérailleurs on road bike
- crap suspension seat posts
- Chain line help
- Brakes squealing on hills
- Possible to fab Coombe pedals and/or cleats?
- Frame detail
- Small wheel, galvanized spokes - what tension?
- 99 trek 6000, need some help
- Frozen seat post,,,,,, help please
- Avid BB7 Road compatible levers???
- my FD cage is rubbing the chain in the lower gears?
- FSA Energy CX cranks keep loosening, creaking
- Wheel repaired and broke again
- Gear hanger - damaged frame
- Sram Red left shifter spring back
- 6-speed adjustment
- Motorbikes don't use Double Butted spokes
- Repetivite jerking feeling when using front brake
- Just switched to Presta valves and have a few ?'s
- Just switched to Presta valves and have a few ?'s
- Can I use any 9spd chain with any 9spd cassette?
- Gearing problem
- Bicycle Pumps
- Nutted Short-Reach Brake Calipers
- Campagnolo 11-speed 135 BCD inner gear options
- Favorite Apron and Why?
- Sealed Bearings on Rear Track Hub won't pop out
- BB length/chainline/clearance: check my math?
- Swapping cassettes onto new wheels
- Newb new to exploding tires
- What are Suntour Power Rings?
- Acquired A Bike
- Can you bend alloy bars...safely?
- Can you bend alloy bars...safely?
- Brased-On Downtube Cable Stops
- Front Derailleur Half Shift?
- BB: Removing Bearings from the Fixed Cup Side
- Vintage 1970's Raleigh Folding Bike Gear Issues
- Upgrading Shimano 105 rear derailleur (short cage) to Campagnolo Record Ti
- HELP: Installing Rotor 3D+ crankset onto Cannondale EVO frame
- Crossed Shifter Cables
- Measurements for replacement bottom bracket - cup/cone to cartridge?
- Ultegra 6700 STI right lever rattles
- tool for dura ace 9000 bottom bracket
- Rims cracks/seams? Are these rims trash? Pictures.
- Fork Problem
- Crankarm length question
- 11-25 to 11-28 Shimano Ultegra Cassette (10 speed) Change and Shifting - Need Help
- Chain rubbing against outer chainring
- Novice wanting to know about crank arm compatabiliy.
- Campagnolo Pista bottom bracket bolts
- Crank pedal thread sizing?
- velocity A23: difficult build?
- Ball-end allen wrenches: AWS-1 vs AWS-8?
- which headset
- squeky bike
- Need help saving my '86 Tempo
- Drive train Component Compatibility
- Shifting Lever Hardware for '77 schwinn varsity
- How much play is acceptable in a pedal spindle
- Best Bike Grease/Lube.......
- road wheels 2006 vs 2013
- Campy NR Head Set Adjustment
- Questions on rear wheel lacing options
- quality cables and housings
- Help for a campy athena 11 speed cassette problem
- Help identifying suspension forks on old (1997) specialized rockhopper
- broken shifter for Sachs Pentasport
- Shimano's 10s 'indexing' = spawn of Satan?
- What gear would damage my road bike chain
- Stripped threads inside of Fork for Disc brake
- All Campy 10 speed derailleurs will shift up to 29t max cog
- Bent front derailleur cage
- Freewheel. i am an idiot
- Missing Link or Power Link with Shimano Chains?
- bb lockring stuck?
- Speed into wind and with the wind
- Help removing fork from an old Rollfast bike. (Picture included)
- Converting gearhub to oil....do you still grease the ball bearings?
- Questions about chainring cleaning/fitting
- Can't tell if pinch flat or tube defect
- '74 Maiilard freewheel tool?
- Best torque wrench for bike mechanics?
- Cassette wobble
- squeaky pedal
- Hello from Ireland
- rebuilding a fox foat from a 2001 bike
- Wheelcalc let me down
- Slightly bent fork
- Are all shimano rear mechs the same?
- squeaking noise coming from steer tube/fork
- Broken sram tourney derailleur, need better replacement!!
- Cammpy NR Head Set/Missing Key Ring
- What's This Thing on My Derailleur? (PHOTOS)
- Ride with broken spoke?