View Full Version : Bicycle Mechanics
- Funky noise in drivetrain when trying to accelerate
- Where did all of the right ones go?
- Soaking chain in degreaser=bad?
- What type of cable to Shimano IGH's use?
- Stuck Sachs BB fixed cup question
- Pulley grease at 10 000kms?
- Odd Krylion Question
- Using a chain tool properly
- Rattling bell-like sound
- Tire failure - bulge
- Raising Handlebars
- Crank repair
- tick, tick, tick, front hub, tick, tick, tick...
- Free CAD software for frame design/bike mechanics..
- Triple chainring on an older bike
- Maintenance of Time Pedals
- Spring Swap in Dart 2
- Computer Mounting Problem....
- Bottom bracket tools?
- Dishing w/a tire on the rim?
- Do I need to redish the wheel?
- wheel building
- Removing Shimano Deore Rapidfire Shift Indicator
- Will 50mm fenders fit?
- Probably a dumb question, but why is my noodle boot so shrivelled?
- Thinking of upgrading my crank.
- Pump options
- Switching out my internal gear hub brand
- mtb shifter on drop bars?
- New Rival road group - which rear derallieur?
- Inner Tube, displaced air.
- Vintage Shimano rear derailleur parts needed
- rattling/rumbling rear hub
- Crank arm bolt won't stay tight
- Need Help With Tire Tube Size
- Possible to use road bike STI shifters with MTB rear derailleur?
- Upgrade and replacement in one
- 7 speed to 6 speed, chain length.
- Front Sus fork upgrade question
- Newbie and curious
- slime
- changing chain, pushed pin/rivet out by mistake
- Momma say Grip Shift is de debbil
- Bottom Bracket Removal
- from 130mm road hubs to 135mm touring/MTB hubs, shifting is now a problem.
- What rear wheel hub can give me the longest freewheel?
- Difference between tyre widths
- Sealed Bottom Bracket debacle
- Help with a chainring problem please
- Gears shift incrementally, but its not an indexed shifter!
- 200 GS Shifters toast?
- Red shifters, 7900 crankset with Dura Ace front derailleurs?
- Reasons for chain rub when standing other than ........
- Front derailleur refuses to go onto 3rd gear
- Crank-Arm seems "bumpy"
- Help - Cannondale Double Wedge Eccentric Bottom Bracket - Lost Circlip
- 52/39 Chainrings.The 39 is too small
- brake pads?
- compact tool kit-- Alien II plus what?
- Roubaix Frame Finish Peeling - Your thoughts?
- And Quad it is
- old sidepull brake flex
- Rear wheel clicking once every revolution
- Pedals with 1/2 inch axle and toe clips
- Campag rear gear: 2011 Record or 2009 Super Record?
- Grinding Noise
- Pads shifting during hard braking - Caliper brakes
- chrome and aircraft stripper.....is there a protective film on my chrome?
- Sealed Hub / Questions/ Looking for info.
- CAAD10 Headset Race
- Rebuilding a 1990 Trek 930 singletrack
- Stripped water bottle holder screw
- How to keep a shiny clean drive train
- Largest 2 rear cogs auto shift ONLY under load
- Shimano XTR M971 Rear Derailleur for 10 speeds
- New freewheel/chainring suggestions for touring conversion?
- Ever get the bottom half of an expander bolt stuck in a fork steerer? Grrr.
- Clunk mid-pedal stroke
- How to remove a superglued bottom bracket cup?
- Sluggish shifting between central cogs. Are my brifters worn out?
- A very stuck quill stem
- Threaded stem height question
- Campag 11sp levers with 10sp cassette. Could it work?
- How to measure seatpost offset?
- Dia-Compe sidepull brakes - nut keeps loosening
- Removing white, crusty residue from bars
- Disadvantages to Seat Post Shims?
- Cannondale Six13 seatpost insertion problem
- Handle Bar Stem Extension
- What does gummed up 9 spd shifter feels like?
- DA 9 spd big ring shifter question
- How long to make cable housing?
- Shimano UN-73 BB install question
- SRAM Calipers
- 7700 10 speed compatibility
- U Brake problem!
- Bought new threaded fork, not comfortable cutting. Can I just add spacers?
- SKF BB Install Question
- Wheelbuilding help - which label on the drive side?
- Loose Headsets