- Campagnolo UT install on shell wider than spec
- Does anyone make a 1-1/4 quill stem to 1-1/8 threadless adapter?
- My suspension Fork is leaking oil!!!
- Presta valve stem through Schrader rim
- back tire is buzzing?
- Bent Steerer Tube
- SIS indexed shift housing - How essential is it really?
- Front Derailleur Shim or Braze-on Adapter?
- Can you convert a 3-speed cruiser into a road bike?
- Gears won't shift.
- Shimano Dura Ace 7800 replace to 7850 or 7900
- Brazed on FD helpppp!
- Build sequence question - My first try
- Sturmey AW Issues
- Spoke length question : Sapim CX-Rays + DA 7800 hubs + Mavic OP
- Front Derailleur Problem
- New chain wrecked already?
- Wheel truing stand
- Ultegra STI shifters with cantilever brakes
- Is the (aluminium freehub) DA FH-7800 compatible with current generation cassettes?
- Figuring out these canti doohickeys! (help please!)
- New Wheels on TREK 300
- bike project
- Bianchi Milano bottom bracket
- Crank arm to BB spindle shims! Any experience? How often does this work?
- Leaking suss fork. What gives?
- I built a set of wheels.... about 20 years ago
- Insert from 3T funda on a different fork
- Surly 185 (black) crank arms are in stock! BB question for heavy rider.
- changing Ultegra gear ratio
- Anyone tape up their Ergon bar end grips?
- Shimano 600 Stem Handlebar Removal
- Advice on Gear Change Problem
- Re-gearing for mountains?
- Slipping Seat Post On Soma Smoothie ES Fixed!
- Gearing and wheels for touring.
- Brake Cable Lubrication
- Rim found to be true - after wheel being tacoed after crash
- Barend shifters
- Rear Derailleur Hanger
- freewheel threading on too far?
- Bike Fork Confusion...
- custom wheels under $500? options
- Can old tires make a swooshing sound?
- Nishiki Pueblo
- how much psi is needed to grease speedpaly pedals?
- Specialised phat tape
- Tire rubs on chainstay. 2007 Lemond Zurich
- Does Anyone Use This Chain Measuring Method?
- Tire type/psi for heavier weight guy
- Durable bottom bracket for a Scattante XRL Comp
- Removing decal without damaging clearcoat?
- Shimano FD6500 Ultegra ... any good?
- Shifter questions
- What wheel would you recommend for me?
- Loctite on hub cone/locknut?
- wheel spacing
- Desperate for urgent help!
- i think my front shocks are shot
- Bottom Bracket for a GT mntn bike
- Which Part of the Brake System Makes the Biggest Difference?
- cantilever to caliper conversion... fork replacement?
- Dura ace 7900 shifters
- Weird chainring problem.
- Seat post installation
- Bike build: Shimano 6600 shifters what about FD and RD
- Normal Wear on Chain and Cassette & Replacement Questions
- Skewers Too Thick?
- Servicing old "spuds"
- Wheel Rebuilding Question
- Why is derailleur default set to high gear?
- Shimano RD MR40 XG 7Speed
- spoke replacement
- Pedro's bottom bracket tool wrench size?
- noise at 17mph
- chain slipping off of large lower derailleur cog
- BB Stopped Creaking
- what is the highest tooth chainring i can fit on my bike? needs a chainguard
- Bontrager 4w Trip not reading
- Need DT Revolution Black Spokes
- 7 speed shimano cassette on a shimano 9 speed hub please help
- Has anyone considered copy / pasting shelds entire site over to a cleaner blog / site
- Gears not engaging
- from twistshift to triggerswitch, now crankset wont engage all gears
- 3 speed 29er? advice 1x3 3x1 or internal?
- hand pumps, which ones are worth getting?
- Fit question
- Removing freehub from Forte Titan wheel?
- Need halp getttng my stem/bars off my frame...
- Drivetrain setup advice: Ultegra FD+RD with touring gears
- center pull brake adjustment on a 27 inch frame with 700c wheels
- 36-hole rims w/ 18 spokes
- Another Campy 11 Speed issue/question - chain / chainring noise.
- Nitto M12 rack w/Paul Comp cantis
- Is a torque wrench required to install BB?
- using Campy integrated shifters w/ V-brakes
- cant true wheel
- 26 X 2.1 tires on 26 X 1.50 rims?
- new wheels never uniform tension
- Koolstop install on Cantilever brakes - problems