- Cantilever Post Adapter - 650B to 700C - on a Velo Orange Polyvalent
- Shimano 8 speed 600 with newer/different brifters?
- Paint peeling near BB30 hole
- Chain stay crack
- Velosteel Coaster brake hub with a 700c rim?
- Shimano Alfine 8 missing shift to 5th
- First wheel build - Question on correct lacing pattern
- Horizontal dropouts + chain tensioner = suspenders & belt?
- Where can I find a replacement expander bolt for nitto jaguar?
- Horizontal dropouts + chain tensioner = suspenders & belt?
- help with hub identification
- Convert 1" threaded headset to threadless?
- Chipped Carbon Fork: Thoughts?
- NuVinci N360 hub - long-term reliability?
- New wheels and cassette - doesn't seem to spin as freely as old one
- Tightening Bottom Bracket ( Help)
- Tightening Bottom Bracket ( Help)
- Why do I keep breaking chains?
- Upgrade path from FSA BB-4000 bottom bracket (and possibly crankset)
- Toe clips or foot straps?
- chainring not symmetrical?
- Is this noise a problem and if so what to do?
- Chris King R45 ISO Rear Disc Hub
- Wondering about my 105 indexed shifting...
- Mild adhesives
- Chain catchers
- My 2nd Thomsom Stem Failure
- Groupset compatibility
- 11 speed wheels with spacers for 8, 9, and 10 speed drive trains
- Is this tire shot?
- Chainrings -- FSA SL-K light vs. Praxis
- Front Wheel Strength Difference - 28 vs 32 spokes
- crank arm problems
- Nipple Switch
- Pls Help, rear wheel won't go in drop out
- Gearing question
- Broken Campy Record rear derailleur
- BB shell sliding out
- TA chainrings for Ultegra 6503 9 speed crank: Alize or Zephyr
- Chain stay crack on Ti frame
- Filling the gap between a brake "nut" and front fork
- Freewheel identification and removal
- Brooks Saddle Clamp - Alterations or Replacements?
- My Campagnolo body angle screw doesn't do diddly squat
- Looking For A 24 Hole Rear Hub
- Replacing old uniglide cassette, questions
- Crashed/damaged hubs salvageable? Pictures
- Front derailleur setup--can't seem to get enough cable tension?
- Campy Nouvo Record RD, freewheel and spoke intereference
- New to wrenching; making some silly mistakes. Share yours?
- Used hub doesn't work w/rim holes
- Skipping
- Trek 100 Navigator crank guard
- Crank replacement Sram Force to Turin Zayante M30
- Choosing bottom bracket and headset
- Just broke my V brake. Can anyone recommend new brakes that are less compicated?
- 52 teeth chainring vs. 48 teeth chainring
- Changing Crank Arm lengths ...
- Spoke length for ambrosio montreal tubular rims and Shimano 600ex Hubs..
- Is it harder to mount cold tires?
- Hozan spoke threading machine--cutting heads longevity?
- Significant Mods to my new CX Bike
- Shimano V-brake issue
- chain rubs on rear tire - fat bike in larger gear
- Where to buy chainring spacers?
- I need a new cone. LBS was no help
- SPD cleat needs 'reglued'
- Do the brake pads (break shoes) move when I adjust the tightness of the cable with?
- old schwinn le tour 3
- Do people clean the inside (spring) in the back derailleur?
- How to properly tighten brakes like this (the cable gets loose every now and then)?
- new bottom backet won't thread on
- Campagnolo Triple Front Derailleur
- What is a flip/flop stem?
- How do I stop 630 32 rims from exploding all the time?
- Bent/loose spoke: harbinger of doom or don't worry about it?
- Crossing shift cables under the down-tube when your bosses are too high
- Dumb question(s)
- Help me with these brakes!
- Bike Cleaning
- Kuwahara bottom bracket woes
- Shimano Nexus 8-speed internal gear hub, slipping issue
- Is there a Pinhead-style seatpost bolt for binders that run through the seatstays?
- 11 spd front derailleur rub
- De-gritting the right Ultegra shifter, but no luck.
- drivetrain noise problems
- I have a vert elementary question here.
- Derailleur woes on Diamondback
- rusted hole in chromoly frame
- Will Shimano 9 speed STIs work with 8 speed rear derailleur?
- SS chain tensioner FOR COGS > 18T?
- Wanting to use 36/22 double crank, with STI shifters and 10 speed cassette 11-36.
- Chain Suck-Do I Need a new Triple?
- Is BMC PRO MACHINE SLC01 2009 compatible with Ultegra Di2?
- Vee Brakes
- Vintage Suntour Cyclone RD troubles
- Brake quick-release conversion?
- How do I "weld" steel brake cable ends to keep them from fraying?
- pulling your crank is fun and easy.
- Seatpost turned from black to bronze - faded or painted seat?